On Apache/2.4.6 (CentOS)
Under GNU General Public License
2024-04-19 04:46 @127.0.0.1 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
File: *manpages*, Node: config, Up: (dir)
CONFIG(5) OpenSSL CONFIG(5)
NAME
config - OpenSSL CONF library configuration files
DESCRIPTION
The OpenSSL CONF library can be used to read configuration files. It
is used for the OpenSSL master configuration file openssl.cnf and in a
few other places like SPKAC files and certificate extension files for
the x509 utility. OpenSSL applications can also use the CONF library
for their own purposes.
A configuration file is divided into a number of sections. Each section
starts with a line [ section_name ] and ends when a new section is
started or end of file is reached. A section name can consist of
alphanumeric characters and underscores.
The first section of a configuration file is special and is referred to
as the default section this is usually unnamed and is from the start of
file until the first named section. When a name is being looked up it
is first looked up in a named section (if any) and then the default
section.
The environment is mapped onto a section called ENV.
Comments can be included by preceding them with the # character
Each section in a configuration file consists of a number of name and
value pairs of the form name=value
The name string can contain any alphanumeric characters as well as a
few punctuation symbols such as . , ; and _.
The value string consists of the string following the = character until
end of line with any leading and trailing white space removed.
The value string undergoes variable expansion. This can be done by
including the form $var or ${var}: this will substitute the value of
the named variable in the current section. It is also possible to
substitute a value from another section using the syntax $section::name
or ${section::name}. By using the form $ENV::name environment variables
can be substituted. It is also possible to assign values to environment
variables by using the name ENV::name, this will work if the program
looks up environment variables using the CONF library instead of
calling getenv() directly.
It is possible to escape certain characters by using any kind of quote
or the \ character. By making the last character of a line a \ a value
string can be spread across multiple lines. In addition the sequences
\n, \r, \b and \t are recognized.
OPENSSL LIBRARY CONFIGURATION
In OpenSSL 0.9.7 and later applications can automatically configure
certain aspects of OpenSSL using the master OpenSSL configuration file,
or optionally an alternative configuration file. The openssl utility
includes this functionality: any sub command uses the master OpenSSL
configuration file unless an option is used in the sub command to use
an alternative configuration file.
To enable library configuration the default section needs to contain an
appropriate line which points to the main configuration section. The
default name is openssl_conf which is used by the openssl utility.
Other applications may use an alternative name such as
myapplicaton_conf.
The configuration section should consist of a set of name value pairs
which contain specific module configuration information. The name
represents the name of the configuration module the meaning of the
value is module specific: it may, for example, represent a further
configuration section containing configuration module specific
information. E.g.
openssl_conf = openssl_init
[openssl_init]
oid_section = new_oids
engines = engine_section
[new_oids]
... new oids here ...
[engine_section]
... engine stuff here ...
The features of each configuration module are described below.
ASN1 OBJECT CONFIGURATION MODULE
This module has the name oid_section. The value of this variable points
to a section containing name value pairs of OIDs: the name is the OID
short and long name, the value is the numerical form of the OID.
Although some of the openssl utility sub commands already have their
own ASN1 OBJECT section functionality not all do. By using the ASN1
OBJECT configuration module all the openssl utility sub commands can
see the new objects as well as any compliant applications. For example:
[new_oids]
some_new_oid = 1.2.3.4
some_other_oid = 1.2.3.5
In OpenSSL 0.9.8 it is also possible to set the value to the long name
followed by a comma and the numerical OID form. For example:
shortName = some object long name, 1.2.3.4
ENGINE CONFIGURATION MODULE
This ENGINE configuration module has the name engines. The value of
this variable points to a section containing further ENGINE
configuration information.
The section pointed to by engines is a table of engine names (though
see engine_id below) and further sections containing configuration
information specific to each ENGINE.
Each ENGINE specific section is used to set default algorithms, load
dynamic, perform initialization and send ctrls. The actual operation
performed depends on the command name which is the name of the name
value pair. The currently supported commands are listed below.
For example:
[engine_section]
# Configure ENGINE named "foo"
foo = foo_section
# Configure ENGINE named "bar"
bar = bar_section
[foo_section]
... foo ENGINE specific commands ...
[bar_section]
... "bar" ENGINE specific commands ...
The command engine_id is used to give the ENGINE name. If used this
command must be first. For example:
[engine_section]
# This would normally handle an ENGINE named "foo"
foo = foo_section
[foo_section]
# Override default name and use "myfoo" instead.
engine_id = myfoo
The command dynamic_path loads and adds an ENGINE from the given path.
It is equivalent to sending the ctrls SO_PATH with the path argument
followed by LIST_ADD with value 2 and LOAD to the dynamic ENGINE. If
this is not the required behaviour then alternative ctrls can be sent
directly to the dynamic ENGINE using ctrl commands.
The command init determines whether to initialize the ENGINE. If the
value is 0 the ENGINE will not be initialized, if 1 and attempt it made
to initialized the ENGINE immediately. If the init command is not
present then an attempt will be made to initialize the ENGINE after all
commands in its section have been processed.
The command default_algorithms sets the default algorithms an ENGINE
will supply using the functions ENGINE_set_default_string()
If the name matches none of the above command names it is assumed to be
a ctrl command which is sent to the ENGINE. The value of the command is
the argument to the ctrl command. If the value is the string EMPTY then
no value is sent to the command.
For example:
[engine_section]
# Configure ENGINE named "foo"
foo = foo_section
[foo_section]
# Load engine from DSO
dynamic_path = /some/path/fooengine.so
# A foo specific ctrl.
some_ctrl = some_value
# Another ctrl that doesn't take a value.
other_ctrl = EMPTY
# Supply all default algorithms
default_algorithms = ALL
EVP CONFIGURATION MODULE
This modules has the name alg_section which points to a section
containing algorithm commands.
Currently the only algorithm command supported is fips_mode whose value
should be a boolean string such as on or off. If the value is on this
attempt to enter FIPS mode. If the call fails or the library is not
FIPS capable then an error occurs.
For example:
alg_section = evp_settings
[evp_settings]
fips_mode = on
NOTES
If a configuration file attempts to expand a variable that doesn't
exist then an error is flagged and the file will not load. This can
happen if an attempt is made to expand an environment variable that
doesn't exist. For example in a previous version of OpenSSL the default
OpenSSL master configuration file used the value of HOME which may not
be defined on non Unix systems and would cause an error.
This can be worked around by including a default section to provide a
default value: then if the environment lookup fails the default value
will be used instead. For this to work properly the default value must
be defined earlier in the configuration file than the expansion. See
the EXAMPLES section for an example of how to do this.
If the same variable exists in the same section then all but the last
value will be silently ignored. In certain circumstances such as with
DNs the same field may occur multiple times. This is usually worked
around by ignoring any characters before an initial . e.g.
1.OU="My first OU"
2.OU="My Second OU"
EXAMPLES
Here is a sample configuration file using some of the features
mentioned above.
# This is the default section.
HOME=/temp
RANDFILE= ${ENV::HOME}/.rnd
configdir=$ENV::HOME/config
[ section_one ]
# We are now in section one.
# Quotes permit leading and trailing whitespace
any = " any variable name "
other = A string that can \
cover several lines \
by including \\ characters
message = Hello World\n
[ section_two ]
greeting = $section_one::message
This next example shows how to expand environment variables safely.
Suppose you want a variable called tmpfile to refer to a temporary
filename. The directory it is placed in can determined by the the TEMP
or TMP environment variables but they may not be set to any value at
all. If you just include the environment variable names and the
variable doesn't exist then this will cause an error when an attempt is
made to load the configuration file. By making use of the default
section both values can be looked up with TEMP taking priority and /tmp
used if neither is defined:
TMP=/tmp
# The above value is used if TMP isn't in the environment
TEMP=$ENV::TMP
# The above value is used if TEMP isn't in the environment
tmpfile=${ENV::TEMP}/tmp.filename
Simple OpenSSL library configuration example to enter FIPS mode:
# Default appname: should match "appname" parameter (if any)
# supplied to CONF_modules_load_file et al.
openssl_conf = openssl_conf_section
[openssl_conf_section]
# Configuration module list
alg_section = evp_sect
[evp_sect]
# Set to "yes" to enter FIPS mode if supported
fips_mode = yes
Note: in the above example you will get an error in non FIPS capable
versions of OpenSSL.
More complex OpenSSL library configuration. Add OID and don't enter
FIPS mode:
# Default appname: should match "appname" parameter (if any)
# supplied to CONF_modules_load_file et al.
openssl_conf = openssl_conf_section
[openssl_conf_section]
# Configuration module list
alg_section = evp_sect
oid_section = new_oids
[evp_sect]
# This will have no effect as FIPS mode is off by default.
# Set to "yes" to enter FIPS mode, if supported
fips_mode = no
[new_oids]
# New OID, just short name
newoid1 = 1.2.3.4.1
# New OID shortname and long name
newoid2 = New OID 2 long name, 1.2.3.4.2
The above examples can be used with with any application supporting
library configuration if "openssl_conf" is modified to match the
appropriate "appname".
For example if the second sample file above is saved to "example.cnf"
then the command line:
OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1
will output:
0:d=0 hl=2 l= 4 prim: OBJECT :newoid1
showing that the OID "newoid1" has been added as "1.2.3.4.1".
BUGS
Currently there is no way to include characters using the octal \nnn
form. Strings are all null terminated so nulls cannot form part of the
value.
The escaping isn't quite right: if you want to use sequences like \n
you can't use any quote escaping on the same line.
Files are loaded in a single pass. This means that an variable
expansion will only work if the variables referenced are defined
earlier in the file.
SEE ALSO
x509(1), req(1), ca(1)
1.0.2k 2017-01-26 CONFIG(5)
Config(3pm) Perl Programmers Reference Guide Config(3pm)
NAME
Config - access Perl configuration information
SYNOPSIS
use Config;
if ($Config{usethreads}) {
print "has thread support\n"
}
use Config qw(myconfig config_sh config_vars config_re);
print myconfig();
print config_sh();
print config_re();
config_vars(qw(osname archname));
DESCRIPTION
The Config module contains all the information that was available to
the "Configure" program at Perl build time (over 900 values).
Shell variables from the config.sh file (written by Configure) are
stored in the readonly-variable %Config, indexed by their names.
Values stored in config.sh as 'undef' are returned as undefined values.
The perl "exists" function can be used to check if a named variable
exists.
For a description of the variables, please have a look at the Glossary
file, as written in the Porting folder, or use the url:
http://perl5.git.perl.org/perl.git/blob/HEAD:/Porting/Glossary
myconfig()
Returns a textual summary of the major perl configuration values.
See also "-V" in "Command Switches" in perlrun.
config_sh()
Returns the entire perl configuration information in the form of
the original config.sh shell variable assignment script.
config_re($regex)
Like config_sh() but returns, as a list, only the config entries
who's names match the $regex.
config_vars(@names)
Prints to STDOUT the values of the named configuration variable.
Each is printed on a separate line in the form:
name='value';
Names which are unknown are output as "name='UNKNOWN';". See also
"-V:name" in "Command Switches" in perlrun.
bincompat_options()
Returns a list of C pre-processor options used when compiling this
perl binary, which affect its binary compatibility with extensions.
"bincompat_options()" and "non_bincompat_options()" are shown
together in the output of "perl -V" as Compile-time options.
non_bincompat_options()
Returns a list of C pre-processor options used when compiling this
perl binary, which do not affect binary compatibility with
extensions.
compile_date()
Returns the compile date (as a string), equivalent to what is shown
by "perl -V"
local_patches()
Returns a list of the names of locally applied patches, equivalent
to what is shown by "perl -V".
header_files()
Returns a list of the header files that should be used as
dependencies for XS code, for this version of Perl on this
platform.
EXAMPLE
Here's a more sophisticated example of using %Config:
use Config;
use strict;
my %sig_num;
my @sig_name;
unless($Config{sig_name} && $Config{sig_num}) {
die "No sigs?";
} else {
my @names = split ' ', $Config{sig_name};
@sig_num{@names} = split ' ', $Config{sig_num};
foreach (@names) {
$sig_name[$sig_num{$_}] ||= $_;
}
}
print "signal #17 = $sig_name[17]\n";
if ($sig_num{ALRM}) {
print "SIGALRM is $sig_num{ALRM}\n";
}
WARNING
Because this information is not stored within the perl executable
itself it is possible (but unlikely) that the information does not
relate to the actual perl binary which is being used to access it.
The Config module is installed into the architecture and version
specific library directory ($Config{installarchlib}) and it checks the
perl version number when loaded.
The values stored in config.sh may be either single-quoted or double-
quoted. Double-quoted strings are handy for those cases where you need
to include escape sequences in the strings. To avoid runtime variable
interpolation, any "$" and "@" characters are replaced by "\$" and
"\@", respectively. This isn't foolproof, of course, so don't embed
"\$" or "\@" in double-quoted strings unless you're willing to deal
with the consequences. (The slashes will end up escaped and the "$" or
"@" will trigger variable interpolation)
GLOSSARY
Most "Config" variables are determined by the "Configure" script on
platforms supported by it (which is most UNIX platforms). Some
platforms have custom-made "Config" variables, and may thus not have
some of the variables described below, or may have extraneous variables
specific to that particular port. See the port specific documentation
in such cases.
_
"_a"
From Unix.U:
This variable defines the extension used for ordinary library
files. For unix, it is .a. The . is included. Other possible
values include .lib.
"_exe"
From Unix.U:
This variable defines the extension used for executable files.
"DJGPP", Cygwin and OS/2 use .exe. Stratus "VOS" uses .pm. On
operating systems which do not require a specific extension for
executable files, this variable is empty.
"_o"
From Unix.U:
This variable defines the extension used for object files. For
unix, it is .o. The . is included. Other possible values include
.obj.
a
"afs"
From afs.U:
This variable is set to "true" if "AFS" (Andrew File System) is
used on the system, "false" otherwise. It is possible to override
this with a hint value or command line option, but you'd better
know what you are doing.
"afsroot"
From afs.U:
This variable is by default set to /afs. In the unlikely case this
is not the correct root, it is possible to override this with a
hint value or command line option. This will be used in subsequent
tests for AFSness in the configure and test process.
"alignbytes"
From alignbytes.U:
This variable holds the number of bytes required to align a
double-- or a long double when applicable. Usual values are 2, 4
and 8. The default is eight, for safety.
"ansi2knr"
From ansi2knr.U:
This variable is set if the user needs to run ansi2knr. Currently,
this is not supported, so we just abort.
"aphostname"
From d_gethname.U:
This variable contains the command which can be used to compute the
host name. The command is fully qualified by its absolute path, to
make it safe when used by a process with super-user privileges.
"api_revision"
From patchlevel.U:
The three variables, api_revision, api_version, and api_subversion,
specify the version of the oldest perl binary compatible with the
present perl. In a full version string such as 5.6.1, api_revision
is the 5. Prior to 5.5.640, the format was a floating point
number, like 5.00563.
perl.c:incpush() and lib/lib.pm will automatically search in
$sitelib/.. for older directories back to the limit specified by
these api_ variables. This is only useful if you have a perl
library directory tree structured like the default one. See
"INSTALL" for how this works. The versioned site_perl directory
was introduced in 5.005, so that is the lowest possible value. The
version list appropriate for the current system is determined in
inc_version_list.U.
"XXX" To do: Since compatibility can depend on compile time
options (such as bincompat, longlong, etc.) it should (perhaps) be
set by Configure, but currently it isn't. Currently, we read a
hard-wired value from patchlevel.h. Perhaps what we ought to do is
take the hard-wired value from patchlevel.h but then modify it if
the current Configure options warrant. patchlevel.h then would use
an #ifdef guard.
"api_subversion"
From patchlevel.U:
The three variables, api_revision, api_version, and api_subversion,
specify the version of the oldest perl binary compatible with the
present perl. In a full version string such as 5.6.1,
api_subversion is the 1. See api_revision for full details.
"api_version"
From patchlevel.U:
The three variables, api_revision, api_version, and api_subversion,
specify the version of the oldest perl binary compatible with the
present perl. In a full version string such as 5.6.1, api_version
is the 6. See api_revision for full details. As a special case,
5.5.0 is rendered in the old-style as 5.005. (In the 5.005_0x
maintenance series, this was the only versioned directory in
$sitelib.)
"api_versionstring"
From patchlevel.U:
This variable combines api_revision, api_version, and
api_subversion in a format such as 5.6.1 (or 5_6_1) suitable for
use as a directory name. This is filesystem dependent.
"ar"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the ar program. After Configure runs, the
value is reset to a plain "ar" and is not useful.
"archlib"
From archlib.U:
This variable holds the name of the directory in which the user
wants to put architecture-dependent public library files for
$package. It is most often a local directory such as
/usr/local/lib. Programs using this variable must be prepared to
deal with filename expansion.
"archlibexp"
From archlib.U:
This variable is the same as the archlib variable, but is filename
expanded at configuration time, for convenient use.
"archname"
From archname.U:
This variable is a short name to characterize the current
architecture. It is used mainly to construct the default archlib.
"archname64"
From use64bits.U:
This variable is used for the 64-bitness part of $archname.
"archobjs"
From Unix.U:
This variable defines any additional objects that must be linked in
with the program on this architecture. On unix, it is usually
empty. It is typically used to include emulations of unix calls or
other facilities. For perl on OS/2, for example, this would
include os2/os2.obj.
"asctime_r_proto"
From d_asctime_r.U:
This variable encodes the prototype of asctime_r. It is zero if
d_asctime_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_asctime_r is defined.
"awk"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the awk program. After Configure runs, the
value is reset to a plain "awk" and is not useful.
b
"baserev"
From baserev.U:
The base revision level of this package, from the .package file.
"bash"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"bin"
From bin.U:
This variable holds the name of the directory in which the user
wants to put publicly executable images for the package in
question. It is most often a local directory such as
/usr/local/bin. Programs using this variable must be prepared to
deal with ~name substitution.
"bin_ELF"
From dlsrc.U:
This variable saves the result from configure if generated binaries
are in "ELF" format. Only set to defined when the test has actually
been performed, and the result was positive.
"binexp"
From bin.U:
This is the same as the bin variable, but is filename expanded at
configuration time, for use in your makefiles.
"bison"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the bison program. After Configure runs, the
value is reset to a plain "bison" and is not useful.
"byacc"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the byacc program. After Configure runs, the
value is reset to a plain "byacc" and is not useful.
"byteorder"
From byteorder.U:
This variable holds the byte order in a "UV". In the following,
larger digits indicate more significance. The variable byteorder
is either 4321 on a big-endian machine, or 1234 on a little-endian,
or 87654321 on a Cray ... or 3412 with weird order !
c
"c" From n.U:
This variable contains the \c string if that is what causes the
echo command to suppress newline. Otherwise it is null. Correct
usage is $echo $n "prompt for a question: $c".
"castflags"
From d_castneg.U:
This variable contains a flag that precise difficulties the
compiler has casting odd floating values to unsigned long: 0 = ok 1
= couldn't cast < 0 2 = couldn't cast >= 0x80000000 4 = couldn't
cast in argument expression list
"cat"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the cat program. After Configure runs, the
value is reset to a plain "cat" and is not useful.
"cc"
From cc.U:
This variable holds the name of a command to execute a C compiler
which can resolve multiple global references that happen to have
the same name. Usual values are "cc" and "gcc". Fervent "ANSI"
compilers may be called "c89". "AIX" has xlc.
"cccdlflags"
From dlsrc.U:
This variable contains any special flags that might need to be
passed with "cc -c" to compile modules to be used to create a
shared library that will be used for dynamic loading. For hpux,
this should be +z. It is up to the makefile to use it.
"ccdlflags"
From dlsrc.U:
This variable contains any special flags that might need to be
passed to cc to link with a shared library for dynamic loading. It
is up to the makefile to use it. For sunos 4.1, it should be
empty.
"ccflags"
From ccflags.U:
This variable contains any additional C compiler flags desired by
the user. It is up to the Makefile to use this.
"ccflags_uselargefiles"
From uselfs.U:
This variable contains the compiler flags needed by large file
builds and added to ccflags by hints files.
"ccname"
From Checkcc.U:
This can set either by hints files or by Configure. If using gcc,
this is gcc, and if not, usually equal to cc, unimpressive, no?
Some platforms, however, make good use of this by storing the
flavor of the C compiler being used here. For example if using the
Sun WorkShop suite, ccname will be "workshop".
"ccsymbols"
From Cppsym.U:
The variable contains the symbols defined by the C compiler alone.
The symbols defined by cpp or by cc when it calls cpp are not in
this list, see cppsymbols and cppccsymbols. The list is a space-
separated list of symbol=value tokens.
"ccversion"
From Checkcc.U:
This can set either by hints files or by Configure. If using a
(non-gcc) vendor cc, this variable may contain a version for the
compiler.
"cf_by"
From cf_who.U:
Login name of the person who ran the Configure script and answered
the questions. This is used to tag both config.sh and config_h.SH.
"cf_email"
From cf_email.U:
Electronic mail address of the person who ran Configure. This can
be used by units that require the user's e-mail, like MailList.U.
"cf_time"
From cf_who.U:
Holds the output of the "date" command when the configuration file
was produced. This is used to tag both config.sh and config_h.SH.
"charbits"
From charsize.U:
This variable contains the value of the "CHARBITS" symbol, which
indicates to the C program how many bits there are in a character.
"charsize"
From charsize.U:
This variable contains the value of the "CHARSIZE" symbol, which
indicates to the C program how many bytes there are in a character.
"chgrp"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"chmod"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the chmod program. After Configure runs, the
value is reset to a plain "chmod" and is not useful.
"chown"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"clocktype"
From d_times.U:
This variable holds the type returned by times(). It can be long,
or clock_t on "BSD" sites (in which case <sys/types.h> should be
included).
"comm"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the comm program. After Configure runs, the
value is reset to a plain "comm" and is not useful.
"compress"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"config_arg0"
From Options.U:
This variable contains the string used to invoke the Configure
command, as reported by the shell in the $0 variable.
"config_argc"
From Options.U:
This variable contains the number of command-line arguments passed
to Configure, as reported by the shell in the $# variable. The
individual arguments are stored as variables config_arg1,
config_arg2, etc.
"config_args"
From Options.U:
This variable contains a single string giving the command-line
arguments passed to Configure. Spaces within arguments, quotes, and
escaped characters are not correctly preserved. To reconstruct the
command line, you must assemble the individual command line pieces,
given in config_arg[0-9]*.
"contains"
From contains.U:
This variable holds the command to do a grep with a proper return
status. On most sane systems it is simply "grep". On insane
systems it is a grep followed by a cat followed by a test. This
variable is primarily for the use of other Configure units.
"cp"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the cp program. After Configure runs, the
value is reset to a plain "cp" and is not useful.
"cpio"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"cpp"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the cpp program. After Configure runs, the
value is reset to a plain "cpp" and is not useful.
"cpp_stuff"
From cpp_stuff.U:
This variable contains an identification of the concatenation
mechanism used by the C preprocessor.
"cppccsymbols"
From Cppsym.U:
The variable contains the symbols defined by the C compiler when it
calls cpp. The symbols defined by the cc alone or cpp alone are
not in this list, see ccsymbols and cppsymbols. The list is a
space-separated list of symbol=value tokens.
"cppflags"
From ccflags.U:
This variable holds the flags that will be passed to the C pre-
processor. It is up to the Makefile to use it.
"cpplast"
From cppstdin.U:
This variable has the same functionality as cppminus, only it
applies to cpprun and not cppstdin.
"cppminus"
From cppstdin.U:
This variable contains the second part of the string which will
invoke the C preprocessor on the standard input and produce to
standard output. This variable will have the value "-" if cppstdin
needs a minus to specify standard input, otherwise the value is "".
"cpprun"
From cppstdin.U:
This variable contains the command which will invoke a C
preprocessor on standard input and put the output to stdout. It is
guaranteed not to be a wrapper and may be a null string if no
preprocessor can be made directly available. This preprocessor
might be different from the one used by the C compiler. Don't
forget to append cpplast after the preprocessor options.
"cppstdin"
From cppstdin.U:
This variable contains the command which will invoke the C
preprocessor on standard input and put the output to stdout. It is
primarily used by other Configure units that ask about preprocessor
symbols.
"cppsymbols"
From Cppsym.U:
The variable contains the symbols defined by the C preprocessor
alone. The symbols defined by cc or by cc when it calls cpp are
not in this list, see ccsymbols and cppccsymbols. The list is a
space-separated list of symbol=value tokens.
"crypt_r_proto"
From d_crypt_r.U:
This variable encodes the prototype of crypt_r. It is zero if
d_crypt_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_crypt_r is defined.
"cryptlib"
From d_crypt.U:
This variable holds -lcrypt or the path to a libcrypt.a archive if
the crypt() function is not defined in the standard C library. It
is up to the Makefile to use this.
"csh"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the csh program. After Configure runs, the
value is reset to a plain "csh" and is not useful.
"ctermid_r_proto"
From d_ctermid_r.U:
This variable encodes the prototype of ctermid_r. It is zero if
d_ctermid_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_ctermid_r is defined.
"ctime_r_proto"
From d_ctime_r.U:
This variable encodes the prototype of ctime_r. It is zero if
d_ctime_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_ctime_r is defined.
d
"d__fwalk"
From d__fwalk.U:
This variable conditionally defines "HAS__FWALK" if _fwalk() is
available to apply a function to all the file handles.
"d_access"
From d_access.U:
This variable conditionally defines "HAS_ACCESS" if the access()
system call is available to check for access permissions using real
IDs.
"d_accessx"
From d_accessx.U:
This variable conditionally defines the "HAS_ACCESSX" symbol, which
indicates to the C program that the accessx() routine is available.
"d_aintl"
From d_aintl.U:
This variable conditionally defines the "HAS_AINTL" symbol, which
indicates to the C program that the aintl() routine is available.
If copysignl is also present we can emulate modfl.
"d_alarm"
From d_alarm.U:
This variable conditionally defines the "HAS_ALARM" symbol, which
indicates to the C program that the alarm() routine is available.
"d_archlib"
From archlib.U:
This variable conditionally defines "ARCHLIB" to hold the pathname
of architecture-dependent library files for $package. If $archlib
is the same as $privlib, then this is set to undef.
"d_asctime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_ASCTIME64 symbol, which
indicates to the C program that the asctime64 () routine is
available.
"d_asctime_r"
From d_asctime_r.U:
This variable conditionally defines the "HAS_ASCTIME_R" symbol,
which indicates to the C program that the asctime_r() routine is
available.
"d_atolf"
From atolf.U:
This variable conditionally defines the "HAS_ATOLF" symbol, which
indicates to the C program that the atolf() routine is available.
"d_atoll"
From atoll.U:
This variable conditionally defines the "HAS_ATOLL" symbol, which
indicates to the C program that the atoll() routine is available.
"d_attribute_deprecated"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_DEPRECATED",
which indicates that "GCC" can handle the attribute for marking
deprecated APIs
"d_attribute_format"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_FORMAT", which
indicates the C compiler can check for printf-like formats.
"d_attribute_malloc"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_MALLOC", which
indicates the C compiler can understand functions as having malloc-
like semantics.
"d_attribute_nonnull"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_NONNULL", which
indicates that the C compiler can know that certain arguments must
not be "NULL", and will check accordingly at compile time.
"d_attribute_noreturn"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_NORETURN", which
indicates that the C compiler can know that certain functions are
guaranteed never to return.
"d_attribute_pure"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_PURE", which
indicates that the C compiler can know that certain functions are
"pure" functions, meaning that they have no side effects, and only
rely on function input and/or global data for their results.
"d_attribute_unused"
From d_attribut.U:
This variable conditionally defines "HASATTRIBUTE_UNUSED", which
indicates that the C compiler can know that certain variables and
arguments may not always be used, and to not throw warnings if they
don't get used.
"d_attribute_warn_unused_result"
From d_attribut.U:
This variable conditionally defines
"HASATTRIBUTE_WARN_UNUSED_RESULT", which indicates that the C
compiler can know that certain functions have a return values that
must not be ignored, such as malloc() or open().
"d_bcmp"
From d_bcmp.U:
This variable conditionally defines the "HAS_BCMP" symbol if the
bcmp() routine is available to compare strings.
"d_bcopy"
From d_bcopy.U:
This variable conditionally defines the "HAS_BCOPY" symbol if the
bcopy() routine is available to copy strings.
"d_bsd"
From Guess.U:
This symbol conditionally defines the symbol "BSD" when running on
a "BSD" system.
"d_bsdgetpgrp"
From d_getpgrp.U:
This variable conditionally defines "USE_BSD_GETPGRP" if getpgrp
needs one arguments whereas "USG" one needs none.
"d_bsdsetpgrp"
From d_setpgrp.U:
This variable conditionally defines "USE_BSD_SETPGRP" if setpgrp
needs two arguments whereas "USG" one needs none. See also
d_setpgid for a "POSIX" interface.
"d_builtin_choose_expr"
From d_builtin.U:
This conditionally defines "HAS_BUILTIN_CHOOSE_EXPR", which
indicates that the compiler supports __builtin_choose_expr(x,y,z).
This built-in function is analogous to the "x?y:z" operator in C,
except that the expression returned has its type unaltered by
promotion rules. Also, the built-in function does not evaluate the
expression that was not chosen.
"d_builtin_expect"
From d_builtin.U:
This conditionally defines "HAS_BUILTIN_EXPECT", which indicates
that the compiler supports __builtin_expect(exp,c). You may use
__builtin_expect to provide the compiler with branch prediction
information.
"d_bzero"
From d_bzero.U:
This variable conditionally defines the "HAS_BZERO" symbol if the
bzero() routine is available to set memory to 0.
"d_c99_variadic_macros"
From d_c99_variadic.U:
This variable conditionally defines the HAS_C99_VARIADIC_MACROS
symbol, which indicates to the C program that C99 variadic macros
are available.
"d_casti32"
From d_casti32.U:
This variable conditionally defines CASTI32, which indicates
whether the C compiler can cast large floats to 32-bit ints.
"d_castneg"
From d_castneg.U:
This variable conditionally defines "CASTNEG", which indicates
whether the C compiler can cast negative float to unsigned.
"d_charvspr"
From d_vprintf.U:
This variable conditionally defines "CHARVSPRINTF" if this system
has vsprintf returning type (char*). The trend seems to be to
declare it as "int vsprintf()".
"d_chown"
From d_chown.U:
This variable conditionally defines the "HAS_CHOWN" symbol, which
indicates to the C program that the chown() routine is available.
"d_chroot"
From d_chroot.U:
This variable conditionally defines the "HAS_CHROOT" symbol, which
indicates to the C program that the chroot() routine is available.
"d_chsize"
From d_chsize.U:
This variable conditionally defines the "CHSIZE" symbol, which
indicates to the C program that the chsize() routine is available
to truncate files. You might need a -lx to get this routine.
"d_class"
From d_class.U:
This variable conditionally defines the "HAS_CLASS" symbol, which
indicates to the C program that the class() routine is available.
"d_clearenv"
From d_clearenv.U:
This variable conditionally defines the "HAS_CLEARENV" symbol,
which indicates to the C program that the clearenv () routine is
available.
"d_closedir"
From d_closedir.U:
This variable conditionally defines "HAS_CLOSEDIR" if closedir() is
available.
"d_cmsghdr_s"
From d_cmsghdr_s.U:
This variable conditionally defines the "HAS_STRUCT_CMSGHDR"
symbol, which indicates that the struct cmsghdr is supported.
"d_const"
From d_const.U:
This variable conditionally defines the "HASCONST" symbol, which
indicates to the C program that this C compiler knows about the
const type.
"d_copysignl"
From d_copysignl.U:
This variable conditionally defines the "HAS_COPYSIGNL" symbol,
which indicates to the C program that the copysignl() routine is
available. If aintl is also present we can emulate modfl.
"d_cplusplus"
From d_cplusplus.U:
This variable conditionally defines the "USE_CPLUSPLUS" symbol,
which indicates that a C++ compiler was used to compiled Perl and
will be used to compile extensions.
"d_crypt"
From d_crypt.U:
This variable conditionally defines the "CRYPT" symbol, which
indicates to the C program that the crypt() routine is available to
encrypt passwords and the like.
"d_crypt_r"
From d_crypt_r.U:
This variable conditionally defines the "HAS_CRYPT_R" symbol, which
indicates to the C program that the crypt_r() routine is available.
"d_csh"
From d_csh.U:
This variable conditionally defines the "CSH" symbol, which
indicates to the C program that the C-shell exists.
"d_ctermid"
From d_ctermid.U:
This variable conditionally defines "CTERMID" if ctermid() is
available to generate filename for terminal.
"d_ctermid_r"
From d_ctermid_r.U:
This variable conditionally defines the "HAS_CTERMID_R" symbol,
which indicates to the C program that the ctermid_r() routine is
available.
"d_ctime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_CTIME64 symbol, which
indicates to the C program that the ctime64 () routine is
available.
"d_ctime_r"
From d_ctime_r.U:
This variable conditionally defines the "HAS_CTIME_R" symbol, which
indicates to the C program that the ctime_r() routine is available.
"d_cuserid"
From d_cuserid.U:
This variable conditionally defines the "HAS_CUSERID" symbol, which
indicates to the C program that the cuserid() routine is available
to get character login names.
"d_dbl_dig"
From d_dbl_dig.U:
This variable conditionally defines d_dbl_dig if this system's
header files provide "DBL_DIG", which is the number of significant
digits in a double precision number.
"d_dbminitproto"
From d_dbminitproto.U:
This variable conditionally defines the "HAS_DBMINIT_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the dbminit() function. Otherwise, it is up to the
program to supply one.
"d_difftime"
From d_difftime.U:
This variable conditionally defines the "HAS_DIFFTIME" symbol,
which indicates to the C program that the difftime() routine is
available.
"d_difftime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_DIFFTIME64 symbol,
which indicates to the C program that the difftime64 () routine is
available.
"d_dir_dd_fd"
From d_dir_dd_fd.U:
This variable conditionally defines the "HAS_DIR_DD_FD" symbol,
which indicates that the "DIR" directory stream type contains a
member variable called dd_fd.
"d_dirfd"
From d_dirfd.U:
This variable conditionally defines the "HAS_DIRFD" constant, which
indicates to the C program that dirfd() is available to return the
file descriptor of a directory stream.
"d_dirnamlen"
From i_dirent.U:
This variable conditionally defines "DIRNAMLEN", which indicates to
the C program that the length of directory entry names is provided
by a d_namelen field.
"d_dlerror"
From d_dlerror.U:
This variable conditionally defines the "HAS_DLERROR" symbol, which
indicates to the C program that the dlerror() routine is available.
"d_dlopen"
From d_dlopen.U:
This variable conditionally defines the "HAS_DLOPEN" symbol, which
indicates to the C program that the dlopen() routine is available.
"d_dlsymun"
From d_dlsymun.U:
This variable conditionally defines "DLSYM_NEEDS_UNDERSCORE", which
indicates that we need to prepend an underscore to the symbol name
before calling dlsym().
"d_dosuid"
From d_dosuid.U:
This variable conditionally defines the symbol "DOSUID", which
tells the C program that it should insert setuid emulation code on
hosts which have setuid #! scripts disabled.
"d_drand48_r"
From d_drand48_r.U:
This variable conditionally defines the HAS_DRAND48_R symbol, which
indicates to the C program that the drand48_r() routine is
available.
"d_drand48proto"
From d_drand48proto.U:
This variable conditionally defines the HAS_DRAND48_PROTO symbol,
which indicates to the C program that the system provides a
prototype for the drand48() function. Otherwise, it is up to the
program to supply one.
"d_dup2"
From d_dup2.U:
This variable conditionally defines HAS_DUP2 if dup2() is available
to duplicate file descriptors.
"d_eaccess"
From d_eaccess.U:
This variable conditionally defines the "HAS_EACCESS" symbol, which
indicates to the C program that the eaccess() routine is available.
"d_endgrent"
From d_endgrent.U:
This variable conditionally defines the "HAS_ENDGRENT" symbol,
which indicates to the C program that the endgrent() routine is
available for sequential access of the group database.
"d_endgrent_r"
From d_endgrent_r.U:
This variable conditionally defines the "HAS_ENDGRENT_R" symbol,
which indicates to the C program that the endgrent_r() routine is
available.
"d_endhent"
From d_endhent.U:
This variable conditionally defines "HAS_ENDHOSTENT" if
endhostent() is available to close whatever was being used for host
queries.
"d_endhostent_r"
From d_endhostent_r.U:
This variable conditionally defines the "HAS_ENDHOSTENT_R" symbol,
which indicates to the C program that the endhostent_r() routine is
available.
"d_endnent"
From d_endnent.U:
This variable conditionally defines "HAS_ENDNETENT" if endnetent()
is available to close whatever was being used for network queries.
"d_endnetent_r"
From d_endnetent_r.U:
This variable conditionally defines the "HAS_ENDNETENT_R" symbol,
which indicates to the C program that the endnetent_r() routine is
available.
"d_endpent"
From d_endpent.U:
This variable conditionally defines "HAS_ENDPROTOENT" if
endprotoent() is available to close whatever was being used for
protocol queries.
"d_endprotoent_r"
From d_endprotoent_r.U:
This variable conditionally defines the "HAS_ENDPROTOENT_R" symbol,
which indicates to the C program that the endprotoent_r() routine
is available.
"d_endpwent"
From d_endpwent.U:
This variable conditionally defines the "HAS_ENDPWENT" symbol,
which indicates to the C program that the endpwent() routine is
available for sequential access of the passwd database.
"d_endpwent_r"
From d_endpwent_r.U:
This variable conditionally defines the "HAS_ENDPWENT_R" symbol,
which indicates to the C program that the endpwent_r() routine is
available.
"d_endsent"
From d_endsent.U:
This variable conditionally defines "HAS_ENDSERVENT" if
endservent() is available to close whatever was being used for
service queries.
"d_endservent_r"
From d_endservent_r.U:
This variable conditionally defines the "HAS_ENDSERVENT_R" symbol,
which indicates to the C program that the endservent_r() routine is
available.
"d_eofnblk"
From nblock_io.U:
This variable conditionally defines "EOF_NONBLOCK" if "EOF" can be
seen when reading from a non-blocking I/O source.
"d_eunice"
From Guess.U:
This variable conditionally defines the symbols "EUNICE" and "VAX",
which alerts the C program that it must deal with idiosyncrasies of
"VMS".
"d_faststdio"
From d_faststdio.U:
This variable conditionally defines the "HAS_FAST_STDIO" symbol,
which indicates to the C program that the "fast stdio" is available
to manipulate the stdio buffers directly.
"d_fchdir"
From d_fchdir.U:
This variable conditionally defines the "HAS_FCHDIR" symbol, which
indicates to the C program that the fchdir() routine is available.
"d_fchmod"
From d_fchmod.U:
This variable conditionally defines the "HAS_FCHMOD" symbol, which
indicates to the C program that the fchmod() routine is available
to change mode of opened files.
"d_fchown"
From d_fchown.U:
This variable conditionally defines the "HAS_FCHOWN" symbol, which
indicates to the C program that the fchown() routine is available
to change ownership of opened files.
"d_fcntl"
From d_fcntl.U:
This variable conditionally defines the "HAS_FCNTL" symbol, and
indicates whether the fcntl() function exists
"d_fcntl_can_lock"
From d_fcntl_can_lock.U:
This variable conditionally defines the "FCNTL_CAN_LOCK" symbol and
indicates whether file locking with fcntl() works.
"d_fd_macros"
From d_fd_set.U:
This variable contains the eventual value of the "HAS_FD_MACROS"
symbol, which indicates if your C compiler knows about the macros
which manipulate an fd_set.
"d_fd_set"
From d_fd_set.U:
This variable contains the eventual value of the "HAS_FD_SET"
symbol, which indicates if your C compiler knows about the fd_set
typedef.
"d_fds_bits"
From d_fd_set.U:
This variable contains the eventual value of the "HAS_FDS_BITS"
symbol, which indicates if your fd_set typedef contains the
fds_bits member. If you have an fd_set typedef, but the dweebs who
installed it did a half-fast job and neglected to provide the
macros to manipulate an fd_set, "HAS_FDS_BITS" will let us know how
to fix the gaffe.
"d_fgetpos"
From d_fgetpos.U:
This variable conditionally defines "HAS_FGETPOS" if fgetpos() is
available to get the file position indicator.
"d_finite"
From d_finite.U:
This variable conditionally defines the "HAS_FINITE" symbol, which
indicates to the C program that the finite() routine is available.
"d_finitel"
From d_finitel.U:
This variable conditionally defines the "HAS_FINITEL" symbol, which
indicates to the C program that the finitel() routine is available.
"d_flexfnam"
From d_flexfnam.U:
This variable conditionally defines the "FLEXFILENAMES" symbol,
which indicates that the system supports filenames longer than 14
characters.
"d_flock"
From d_flock.U:
This variable conditionally defines "HAS_FLOCK" if flock() is
available to do file locking.
"d_flockproto"
From d_flockproto.U:
This variable conditionally defines the "HAS_FLOCK_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the flock() function. Otherwise, it is up to the
program to supply one.
"d_fork"
From d_fork.U:
This variable conditionally defines the "HAS_FORK" symbol, which
indicates to the C program that the fork() routine is available.
"d_fp_class"
From d_fp_class.U:
This variable conditionally defines the "HAS_FP_CLASS" symbol,
which indicates to the C program that the fp_class() routine is
available.
"d_fpathconf"
From d_pathconf.U:
This variable conditionally defines the "HAS_FPATHCONF" symbol,
which indicates to the C program that the pathconf() routine is
available to determine file-system related limits and options
associated with a given open file descriptor.
"d_fpclass"
From d_fpclass.U:
This variable conditionally defines the "HAS_FPCLASS" symbol, which
indicates to the C program that the fpclass() routine is available.
"d_fpclassify"
From d_fpclassify.U:
This variable conditionally defines the "HAS_FPCLASSIFY" symbol,
which indicates to the C program that the fpclassify() routine is
available.
"d_fpclassl"
From d_fpclassl.U:
This variable conditionally defines the "HAS_FPCLASSL" symbol,
which indicates to the C program that the fpclassl() routine is
available.
"d_fpos64_t"
From d_fpos64_t.U:
This symbol will be defined if the C compiler supports fpos64_t.
"d_frexpl"
From d_frexpl.U:
This variable conditionally defines the "HAS_FREXPL" symbol, which
indicates to the C program that the frexpl() routine is available.
"d_fs_data_s"
From d_fs_data_s.U:
This variable conditionally defines the "HAS_STRUCT_FS_DATA"
symbol, which indicates that the struct fs_data is supported.
"d_fseeko"
From d_fseeko.U:
This variable conditionally defines the "HAS_FSEEKO" symbol, which
indicates to the C program that the fseeko() routine is available.
"d_fsetpos"
From d_fsetpos.U:
This variable conditionally defines "HAS_FSETPOS" if fsetpos() is
available to set the file position indicator.
"d_fstatfs"
From d_fstatfs.U:
This variable conditionally defines the "HAS_FSTATFS" symbol, which
indicates to the C program that the fstatfs() routine is available.
"d_fstatvfs"
From d_statvfs.U:
This variable conditionally defines the "HAS_FSTATVFS" symbol,
which indicates to the C program that the fstatvfs() routine is
available.
"d_fsync"
From d_fsync.U:
This variable conditionally defines the "HAS_FSYNC" symbol, which
indicates to the C program that the fsync() routine is available.
"d_ftello"
From d_ftello.U:
This variable conditionally defines the "HAS_FTELLO" symbol, which
indicates to the C program that the ftello() routine is available.
"d_ftime"
From d_ftime.U:
This variable conditionally defines the "HAS_FTIME" symbol, which
indicates that the ftime() routine exists. The ftime() routine is
basically a sub-second accuracy clock.
"d_futimes"
From d_futimes.U:
This variable conditionally defines the "HAS_FUTIMES" symbol, which
indicates to the C program that the futimes() routine is available.
"d_Gconvert"
From d_gconvert.U:
This variable holds what Gconvert is defined as to convert floating
point numbers into strings. By default, Configure sets "this"
macro to use the first of gconvert, gcvt, or sprintf that pass
sprintf-%g-like behaviour tests. If perl is using long doubles,
the macro uses the first of the following functions that pass
Configure's tests: qgcvt, sprintf (if Configure knows how to make
sprintf format long doubles--see sPRIgldbl), gconvert, gcvt, and
sprintf (casting to double). The gconvert_preference and
gconvert_ld_preference variables can be used to alter Configure's
preferences, for doubles and long doubles, respectively. If
present, they contain a space-separated list of one or more of the
above function names in the order they should be tried.
d_Gconvert may be set to override Configure with a platform-
specific function. If this function expects a double, a different
value may need to be set by the uselongdouble.cbu call-back unit so
that long doubles can be formatted without loss of precision.
"d_gdbm_ndbm_h_uses_prototypes"
From i_ndbm.U:
This variable conditionally defines the "NDBM_H_USES_PROTOTYPES"
symbol, which indicates that the gdbm-ndbm.h include file uses real
"ANSI" C prototypes instead of K&R style function declarations. K&R
style declarations are unsupported in C++, so the include file
requires special handling when using a C++ compiler and this
variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for
alternative ndbm.h include files.
"d_gdbmndbm_h_uses_prototypes"
From i_ndbm.U:
This variable conditionally defines the "NDBM_H_USES_PROTOTYPES"
symbol, which indicates that the gdbm/ndbm.h include file uses real
"ANSI" C prototypes instead of K&R style function declarations. K&R
style declarations are unsupported in C++, so the include file
requires special handling when using a C++ compiler and this
variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for
alternative ndbm.h include files.
"d_getaddrinfo"
From d_getaddrinfo.U:
This variable conditionally defines the "HAS_GETADDRINFO" symbol,
which indicates to the C program that the getaddrinfo() function is
available.
"d_getcwd"
From d_getcwd.U:
This variable conditionally defines the "HAS_GETCWD" symbol, which
indicates to the C program that the getcwd() routine is available
to get the current working directory.
"d_getespwnam"
From d_getespwnam.U:
This variable conditionally defines "HAS_GETESPWNAM" if
getespwnam() is available to retrieve enhanced (shadow) password
entries by name.
"d_getfsstat"
From d_getfsstat.U:
This variable conditionally defines the "HAS_GETFSSTAT" symbol,
which indicates to the C program that the getfsstat() routine is
available.
"d_getgrent"
From d_getgrent.U:
This variable conditionally defines the "HAS_GETGRENT" symbol,
which indicates to the C program that the getgrent() routine is
available for sequential access of the group database.
"d_getgrent_r"
From d_getgrent_r.U:
This variable conditionally defines the "HAS_GETGRENT_R" symbol,
which indicates to the C program that the getgrent_r() routine is
available.
"d_getgrgid_r"
From d_getgrgid_r.U:
This variable conditionally defines the "HAS_GETGRGID_R" symbol,
which indicates to the C program that the getgrgid_r() routine is
available.
"d_getgrnam_r"
From d_getgrnam_r.U:
This variable conditionally defines the "HAS_GETGRNAM_R" symbol,
which indicates to the C program that the getgrnam_r() routine is
available.
"d_getgrps"
From d_getgrps.U:
This variable conditionally defines the "HAS_GETGROUPS" symbol,
which indicates to the C program that the getgroups() routine is
available to get the list of process groups.
"d_gethbyaddr"
From d_gethbyad.U:
This variable conditionally defines the "HAS_GETHOSTBYADDR" symbol,
which indicates to the C program that the gethostbyaddr() routine
is available to look up hosts by their "IP" addresses.
"d_gethbyname"
From d_gethbynm.U:
This variable conditionally defines the "HAS_GETHOSTBYNAME" symbol,
which indicates to the C program that the gethostbyname() routine
is available to look up host names in some data base or other.
"d_gethent"
From d_gethent.U:
This variable conditionally defines "HAS_GETHOSTENT" if
gethostent() is available to look up host names in some data base
or another.
"d_gethname"
From d_gethname.U:
This variable conditionally defines the "HAS_GETHOSTNAME" symbol,
which indicates to the C program that the gethostname() routine may
be used to derive the host name.
"d_gethostbyaddr_r"
From d_gethostbyaddr_r.U:
This variable conditionally defines the "HAS_GETHOSTBYADDR_R"
symbol, which indicates to the C program that the gethostbyaddr_r()
routine is available.
"d_gethostbyname_r"
From d_gethostbyname_r.U:
This variable conditionally defines the "HAS_GETHOSTBYNAME_R"
symbol, which indicates to the C program that the gethostbyname_r()
routine is available.
"d_gethostent_r"
From d_gethostent_r.U:
This variable conditionally defines the "HAS_GETHOSTENT_R" symbol,
which indicates to the C program that the gethostent_r() routine is
available.
"d_gethostprotos"
From d_gethostprotos.U:
This variable conditionally defines the "HAS_GETHOST_PROTOS"
symbol, which indicates to the C program that <netdb.h> supplies
prototypes for the various gethost*() functions. See also
netdbtype.U for probing for various netdb types.
"d_getitimer"
From d_getitimer.U:
This variable conditionally defines the "HAS_GETITIMER" symbol,
which indicates to the C program that the getitimer() routine is
available.
"d_getlogin"
From d_getlogin.U:
This variable conditionally defines the "HAS_GETLOGIN" symbol,
which indicates to the C program that the getlogin() routine is
available to get the login name.
"d_getlogin_r"
From d_getlogin_r.U:
This variable conditionally defines the "HAS_GETLOGIN_R" symbol,
which indicates to the C program that the getlogin_r() routine is
available.
"d_getmnt"
From d_getmnt.U:
This variable conditionally defines the "HAS_GETMNT" symbol, which
indicates to the C program that the getmnt() routine is available
to retrieve one or more mount info blocks by filename.
"d_getmntent"
From d_getmntent.U:
This variable conditionally defines the "HAS_GETMNTENT" symbol,
which indicates to the C program that the getmntent() routine is
available to iterate through mounted files to get their mount info.
"d_getnameinfo"
From d_getnameinfo.U:
This variable conditionally defines the "HAS_GETNAMEINFO" symbol,
which indicates to the C program that the getnameinfo() function is
available.
"d_getnbyaddr"
From d_getnbyad.U:
This variable conditionally defines the "HAS_GETNETBYADDR" symbol,
which indicates to the C program that the getnetbyaddr() routine is
available to look up networks by their "IP" addresses.
"d_getnbyname"
From d_getnbynm.U:
This variable conditionally defines the "HAS_GETNETBYNAME" symbol,
which indicates to the C program that the getnetbyname() routine is
available to look up networks by their names.
"d_getnent"
From d_getnent.U:
This variable conditionally defines "HAS_GETNETENT" if getnetent()
is available to look up network names in some data base or another.
"d_getnetbyaddr_r"
From d_getnetbyaddr_r.U:
This variable conditionally defines the "HAS_GETNETBYADDR_R"
symbol, which indicates to the C program that the getnetbyaddr_r()
routine is available.
"d_getnetbyname_r"
From d_getnetbyname_r.U:
This variable conditionally defines the "HAS_GETNETBYNAME_R"
symbol, which indicates to the C program that the getnetbyname_r()
routine is available.
"d_getnetent_r"
From d_getnetent_r.U:
This variable conditionally defines the "HAS_GETNETENT_R" symbol,
which indicates to the C program that the getnetent_r() routine is
available.
"d_getnetprotos"
From d_getnetprotos.U:
This variable conditionally defines the "HAS_GETNET_PROTOS" symbol,
which indicates to the C program that <netdb.h> supplies prototypes
for the various getnet*() functions. See also netdbtype.U for
probing for various netdb types.
"d_getpagsz"
From d_getpagsz.U:
This variable conditionally defines "HAS_GETPAGESIZE" if
getpagesize() is available to get the system page size.
"d_getpbyname"
From d_getprotby.U:
This variable conditionally defines the "HAS_GETPROTOBYNAME"
symbol, which indicates to the C program that the getprotobyname()
routine is available to look up protocols by their name.
"d_getpbynumber"
From d_getprotby.U:
This variable conditionally defines the "HAS_GETPROTOBYNUMBER"
symbol, which indicates to the C program that the
getprotobynumber() routine is available to look up protocols by
their number.
"d_getpent"
From d_getpent.U:
This variable conditionally defines "HAS_GETPROTOENT" if
getprotoent() is available to look up protocols in some data base
or another.
"d_getpgid"
From d_getpgid.U:
This variable conditionally defines the "HAS_GETPGID" symbol, which
indicates to the C program that the getpgid(pid) function is
available to get the process group id.
"d_getpgrp"
From d_getpgrp.U:
This variable conditionally defines "HAS_GETPGRP" if getpgrp() is
available to get the current process group.
"d_getpgrp2"
From d_getpgrp2.U:
This variable conditionally defines the HAS_GETPGRP2 symbol, which
indicates to the C program that the getpgrp2() (as in DG/"UX")
routine is available to get the current process group.
"d_getppid"
From d_getppid.U:
This variable conditionally defines the "HAS_GETPPID" symbol, which
indicates to the C program that the getppid() routine is available
to get the parent process "ID".
"d_getprior"
From d_getprior.U:
This variable conditionally defines "HAS_GETPRIORITY" if
getpriority() is available to get a process's priority.
"d_getprotobyname_r"
From d_getprotobyname_r.U:
This variable conditionally defines the "HAS_GETPROTOBYNAME_R"
symbol, which indicates to the C program that the
getprotobyname_r() routine is available.
"d_getprotobynumber_r"
From d_getprotobynumber_r.U:
This variable conditionally defines the "HAS_GETPROTOBYNUMBER_R"
symbol, which indicates to the C program that the
getprotobynumber_r() routine is available.
"d_getprotoent_r"
From d_getprotoent_r.U:
This variable conditionally defines the "HAS_GETPROTOENT_R" symbol,
which indicates to the C program that the getprotoent_r() routine
is available.
"d_getprotoprotos"
From d_getprotoprotos.U:
This variable conditionally defines the "HAS_GETPROTO_PROTOS"
symbol, which indicates to the C program that <netdb.h> supplies
prototypes for the various getproto*() functions. See also
netdbtype.U for probing for various netdb types.
"d_getprpwnam"
From d_getprpwnam.U:
This variable conditionally defines "HAS_GETPRPWNAM" if
getprpwnam() is available to retrieve protected (shadow) password
entries by name.
"d_getpwent"
From d_getpwent.U:
This variable conditionally defines the "HAS_GETPWENT" symbol,
which indicates to the C program that the getpwent() routine is
available for sequential access of the passwd database.
"d_getpwent_r"
From d_getpwent_r.U:
This variable conditionally defines the "HAS_GETPWENT_R" symbol,
which indicates to the C program that the getpwent_r() routine is
available.
"d_getpwnam_r"
From d_getpwnam_r.U:
This variable conditionally defines the "HAS_GETPWNAM_R" symbol,
which indicates to the C program that the getpwnam_r() routine is
available.
"d_getpwuid_r"
From d_getpwuid_r.U:
This variable conditionally defines the "HAS_GETPWUID_R" symbol,
which indicates to the C program that the getpwuid_r() routine is
available.
"d_getsbyname"
From d_getsrvby.U:
This variable conditionally defines the "HAS_GETSERVBYNAME" symbol,
which indicates to the C program that the getservbyname() routine
is available to look up services by their name.
"d_getsbyport"
From d_getsrvby.U:
This variable conditionally defines the "HAS_GETSERVBYPORT" symbol,
which indicates to the C program that the getservbyport() routine
is available to look up services by their port.
"d_getsent"
From d_getsent.U:
This variable conditionally defines "HAS_GETSERVENT" if
getservent() is available to look up network services in some data
base or another.
"d_getservbyname_r"
From d_getservbyname_r.U:
This variable conditionally defines the "HAS_GETSERVBYNAME_R"
symbol, which indicates to the C program that the getservbyname_r()
routine is available.
"d_getservbyport_r"
From d_getservbyport_r.U:
This variable conditionally defines the "HAS_GETSERVBYPORT_R"
symbol, which indicates to the C program that the getservbyport_r()
routine is available.
"d_getservent_r"
From d_getservent_r.U:
This variable conditionally defines the "HAS_GETSERVENT_R" symbol,
which indicates to the C program that the getservent_r() routine is
available.
"d_getservprotos"
From d_getservprotos.U:
This variable conditionally defines the "HAS_GETSERV_PROTOS"
symbol, which indicates to the C program that <netdb.h> supplies
prototypes for the various getserv*() functions. See also
netdbtype.U for probing for various netdb types.
"d_getspnam"
From d_getspnam.U:
This variable conditionally defines "HAS_GETSPNAM" if getspnam() is
available to retrieve SysV shadow password entries by name.
"d_getspnam_r"
From d_getspnam_r.U:
This variable conditionally defines the "HAS_GETSPNAM_R" symbol,
which indicates to the C program that the getspnam_r() routine is
available.
"d_gettimeod"
From d_ftime.U:
This variable conditionally defines the "HAS_GETTIMEOFDAY" symbol,
which indicates that the gettimeofday() system call exists (to
obtain a sub-second accuracy clock). You should probably include
<sys/resource.h>.
"d_gmtime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_GMTIME64 symbol, which
indicates to the C program that the gmtime64 () routine is
available.
"d_gmtime_r"
From d_gmtime_r.U:
This variable conditionally defines the "HAS_GMTIME_R" symbol,
which indicates to the C program that the gmtime_r() routine is
available.
"d_gnulibc"
From d_gnulibc.U:
Defined if we're dealing with the "GNU" C Library.
"d_grpasswd"
From i_grp.U:
This variable conditionally defines "GRPASSWD", which indicates
that struct group in <grp.h> contains gr_passwd.
"d_hasmntopt"
From d_hasmntopt.U:
This variable conditionally defines the "HAS_HASMNTOPT" symbol,
which indicates to the C program that the hasmntopt() routine is
available to query the mount options of file systems.
"d_htonl"
From d_htonl.U:
This variable conditionally defines "HAS_HTONL" if htonl() and its
friends are available to do network order byte swapping.
"d_ilogbl"
From d_ilogbl.U:
This variable conditionally defines the "HAS_ILOGBL" symbol, which
indicates to the C program that the ilogbl() routine is available.
If scalbnl is also present we can emulate frexpl.
"d_inc_version_list"
From inc_version_list.U:
This variable conditionally defines "PERL_INC_VERSION_LIST". It is
set to undef when "PERL_INC_VERSION_LIST" is empty.
"d_index"
From d_strchr.U:
This variable conditionally defines "HAS_INDEX" if index() and
rindex() are available for string searching.
"d_inetaton"
From d_inetaton.U:
This variable conditionally defines the "HAS_INET_ATON" symbol,
which indicates to the C program that the inet_aton() function is
available to parse "IP" address "dotted-quad" strings.
"d_inetntop"
From d_inetntop.U:
This variable conditionally defines the "HAS_INETNTOP" symbol,
which indicates to the C program that the inet_ntop() function is
available.
"d_inetpton"
From d_inetpton.U:
This variable conditionally defines the "HAS_INETPTON" symbol,
which indicates to the C program that the inet_pton() function is
available.
"d_int64_t"
From d_int64_t.U:
This symbol will be defined if the C compiler supports int64_t.
"d_ipv6_mreq"
From d_socket.U:
This variable conditionally defines the HAS_IPV6_MREQ symbol, which
indicates the availability of a struct ipv6_mreq.
"d_isascii"
From d_isascii.U:
This variable conditionally defines the "HAS_ISASCII" constant,
which indicates to the C program that isascii() is available.
"d_isblank"
From d_isblank.U:
This variable conditionally defines the "HAS_ISBLANK" constant,
which indicates to the C program that isblank() is available.
"d_isfinite"
From d_isfinite.U:
This variable conditionally defines the "HAS_ISFINITE" symbol,
which indicates to the C program that the isfinite() routine is
available.
"d_isinf"
From d_isinf.U:
This variable conditionally defines the "HAS_ISINF" symbol, which
indicates to the C program that the isinf() routine is available.
"d_isnan"
From d_isnan.U:
This variable conditionally defines the "HAS_ISNAN" symbol, which
indicates to the C program that the isnan() routine is available.
"d_isnanl"
From d_isnanl.U:
This variable conditionally defines the "HAS_ISNANL" symbol, which
indicates to the C program that the isnanl() routine is available.
"d_killpg"
From d_killpg.U:
This variable conditionally defines the "HAS_KILLPG" symbol, which
indicates to the C program that the killpg() routine is available
to kill process groups.
"d_lchown"
From d_lchown.U:
This variable conditionally defines the "HAS_LCHOWN" symbol, which
indicates to the C program that the lchown() routine is available
to operate on a symbolic link (instead of following the link).
"d_ldbl_dig"
From d_ldbl_dig.U:
This variable conditionally defines d_ldbl_dig if this system's
header files provide "LDBL_DIG", which is the number of significant
digits in a long double precision number.
"d_libm_lib_version"
From d_libm_lib_version.U:
This variable conditionally defines the "LIBM_LIB_VERSION" symbol,
which indicates to the C program that math.h defines "_LIB_VERSION"
being available in libm
"d_link"
From d_link.U:
This variable conditionally defines "HAS_LINK" if link() is
available to create hard links.
"d_localtime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_LOCALTIME64 symbol,
which indicates to the C program that the localtime64 () routine is
available.
"d_localtime_r"
From d_localtime_r.U:
This variable conditionally defines the "HAS_LOCALTIME_R" symbol,
which indicates to the C program that the localtime_r() routine is
available.
"d_localtime_r_needs_tzset"
From d_localtime_r.U:
This variable conditionally defines the "LOCALTIME_R_NEEDS_TZSET"
symbol, which makes us call tzset before localtime_r()
"d_locconv"
From d_locconv.U:
This variable conditionally defines "HAS_LOCALECONV" if
localeconv() is available for numeric and monetary formatting
conventions.
"d_lockf"
From d_lockf.U:
This variable conditionally defines "HAS_LOCKF" if lockf() is
available to do file locking.
"d_longdbl"
From d_longdbl.U:
This variable conditionally defines "HAS_LONG_DOUBLE" if the long
double type is supported.
"d_longlong"
From d_longlong.U:
This variable conditionally defines "HAS_LONG_LONG" if the long
long type is supported.
"d_lseekproto"
From d_lseekproto.U:
This variable conditionally defines the "HAS_LSEEK_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the lseek() function. Otherwise, it is up to the
program to supply one.
"d_lstat"
From d_lstat.U:
This variable conditionally defines "HAS_LSTAT" if lstat() is
available to do file stats on symbolic links.
"d_madvise"
From d_madvise.U:
This variable conditionally defines "HAS_MADVISE" if madvise() is
available to map a file into memory.
"d_malloc_good_size"
From d_malloc_size.U:
This symbol, if defined, indicates that the malloc_good_size
routine is available for use.
"d_malloc_size"
From d_malloc_size.U:
This symbol, if defined, indicates that the malloc_size routine is
available for use.
"d_mblen"
From d_mblen.U:
This variable conditionally defines the "HAS_MBLEN" symbol, which
indicates to the C program that the mblen() routine is available to
find the number of bytes in a multibye character.
"d_mbstowcs"
From d_mbstowcs.U:
This variable conditionally defines the "HAS_MBSTOWCS" symbol,
which indicates to the C program that the mbstowcs() routine is
available to convert a multibyte string into a wide character
string.
"d_mbtowc"
From d_mbtowc.U:
This variable conditionally defines the "HAS_MBTOWC" symbol, which
indicates to the C program that the mbtowc() routine is available
to convert multibyte to a wide character.
"d_memchr"
From d_memchr.U:
This variable conditionally defines the "HAS_MEMCHR" symbol, which
indicates to the C program that the memchr() routine is available
to locate characters within a C string.
"d_memcmp"
From d_memcmp.U:
This variable conditionally defines the "HAS_MEMCMP" symbol, which
indicates to the C program that the memcmp() routine is available
to compare blocks of memory.
"d_memcpy"
From d_memcpy.U:
This variable conditionally defines the "HAS_MEMCPY" symbol, which
indicates to the C program that the memcpy() routine is available
to copy blocks of memory.
"d_memmove"
From d_memmove.U:
This variable conditionally defines the "HAS_MEMMOVE" symbol, which
indicates to the C program that the memmove() routine is available
to copy potentially overlapping blocks of memory.
"d_memset"
From d_memset.U:
This variable conditionally defines the "HAS_MEMSET" symbol, which
indicates to the C program that the memset() routine is available
to set blocks of memory.
"d_mkdir"
From d_mkdir.U:
This variable conditionally defines the "HAS_MKDIR" symbol, which
indicates to the C program that the mkdir() routine is available to
create directories..
"d_mkdtemp"
From d_mkdtemp.U:
This variable conditionally defines the "HAS_MKDTEMP" symbol, which
indicates to the C program that the mkdtemp() routine is available
to exclusively create a uniquely named temporary directory.
"d_mkfifo"
From d_mkfifo.U:
This variable conditionally defines the "HAS_MKFIFO" symbol, which
indicates to the C program that the mkfifo() routine is available.
"d_mkstemp"
From d_mkstemp.U:
This variable conditionally defines the "HAS_MKSTEMP" symbol, which
indicates to the C program that the mkstemp() routine is available
to exclusively create and open a uniquely named temporary file.
"d_mkstemps"
From d_mkstemps.U:
This variable conditionally defines the "HAS_MKSTEMPS" symbol,
which indicates to the C program that the mkstemps() routine is
available to exclusively create and open a uniquely named (with a
suffix) temporary file.
"d_mktime"
From d_mktime.U:
This variable conditionally defines the "HAS_MKTIME" symbol, which
indicates to the C program that the mktime() routine is available.
"d_mktime64"
From d_timefuncs64.U:
This variable conditionally defines the HAS_MKTIME64 symbol, which
indicates to the C program that the mktime64 () routine is
available.
"d_mmap"
From d_mmap.U:
This variable conditionally defines "HAS_MMAP" if mmap() is
available to map a file into memory.
"d_modfl"
From d_modfl.U:
This variable conditionally defines the "HAS_MODFL" symbol, which
indicates to the C program that the modfl() routine is available.
"d_modfl_pow32_bug"
From d_modfl.U:
This variable conditionally defines the HAS_MODFL_POW32_BUG symbol,
which indicates that modfl() is broken for long doubles >= pow(2,
32). For example from 4294967303.150000 one would get
4294967302.000000 and 1.150000. The bug has been seen in certain
versions of glibc, release 2.2.2 is known to be okay.
"d_modflproto"
From d_modfl.U:
This symbol, if defined, indicates that the system provides a
prototype for the modfl() function. Otherwise, it is up to the
program to supply one. C99 says it should be long double
modfl(long double, long double *);
"d_mprotect"
From d_mprotect.U:
This variable conditionally defines "HAS_MPROTECT" if mprotect() is
available to modify the access protection of a memory mapped file.
"d_msg"
From d_msg.U:
This variable conditionally defines the "HAS_MSG" symbol, which
indicates that the entire msg*(2) library is present.
"d_msg_ctrunc"
From d_socket.U:
This variable conditionally defines the "HAS_MSG_CTRUNC" symbol,
which indicates that the "MSG_CTRUNC" is available. #ifdef is not
enough because it may be an enum, glibc has been known to do this.
"d_msg_dontroute"
From d_socket.U:
This variable conditionally defines the "HAS_MSG_DONTROUTE" symbol,
which indicates that the "MSG_DONTROUTE" is available. #ifdef is
not enough because it may be an enum, glibc has been known to do
this.
"d_msg_oob"
From d_socket.U:
This variable conditionally defines the "HAS_MSG_OOB" symbol, which
indicates that the "MSG_OOB" is available. #ifdef is not enough
because it may be an enum, glibc has been known to do this.
"d_msg_peek"
From d_socket.U:
This variable conditionally defines the "HAS_MSG_PEEK" symbol,
which indicates that the "MSG_PEEK" is available. #ifdef is not
enough because it may be an enum, glibc has been known to do this.
"d_msg_proxy"
From d_socket.U:
This variable conditionally defines the "HAS_MSG_PROXY" symbol,
which indicates that the "MSG_PROXY" is available. #ifdef is not
enough because it may be an enum, glibc has been known to do this.
"d_msgctl"
From d_msgctl.U:
This variable conditionally defines the "HAS_MSGCTL" symbol, which
indicates to the C program that the msgctl() routine is available.
"d_msgget"
From d_msgget.U:
This variable conditionally defines the "HAS_MSGGET" symbol, which
indicates to the C program that the msgget() routine is available.
"d_msghdr_s"
From d_msghdr_s.U:
This variable conditionally defines the "HAS_STRUCT_MSGHDR" symbol,
which indicates that the struct msghdr is supported.
"d_msgrcv"
From d_msgrcv.U:
This variable conditionally defines the "HAS_MSGRCV" symbol, which
indicates to the C program that the msgrcv() routine is available.
"d_msgsnd"
From d_msgsnd.U:
This variable conditionally defines the "HAS_MSGSND" symbol, which
indicates to the C program that the msgsnd() routine is available.
"d_msync"
From d_msync.U:
This variable conditionally defines "HAS_MSYNC" if msync() is
available to synchronize a mapped file.
"d_munmap"
From d_munmap.U:
This variable conditionally defines "HAS_MUNMAP" if munmap() is
available to unmap a region mapped by mmap().
"d_mymalloc"
From mallocsrc.U:
This variable conditionally defines "MYMALLOC" in case other parts
of the source want to take special action if "MYMALLOC" is used.
This may include different sorts of profiling or error detection.
"d_ndbm"
From i_ndbm.U:
This variable conditionally defines the "HAS_NDBM" symbol, which
indicates that both the ndbm.h include file and an appropriate ndbm
library exist. Consult the different i_*ndbm variables to find out
the actual include location. Sometimes, a system has the header
file but not the library. This variable will only be set if the
system has both.
"d_ndbm_h_uses_prototypes"
From i_ndbm.U:
This variable conditionally defines the "NDBM_H_USES_PROTOTYPES"
symbol, which indicates that the ndbm.h include file uses real
"ANSI" C prototypes instead of K&R style function declarations. K&R
style declarations are unsupported in C++, so the include file
requires special handling when using a C++ compiler and this
variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for
alternative ndbm.h include files.
"d_nice"
From d_nice.U:
This variable conditionally defines the "HAS_NICE" symbol, which
indicates to the C program that the nice() routine is available.
"d_nl_langinfo"
From d_nl_langinfo.U:
This variable conditionally defines the "HAS_NL_LANGINFO" symbol,
which indicates to the C program that the nl_langinfo() routine is
available.
"d_nv_preserves_uv"
From perlxv.U:
This variable indicates whether a variable of type nvtype can
preserve all the bits a variable of type uvtype.
"d_nv_zero_is_allbits_zero"
From perlxv.U:
This variable indicates whether a variable of type nvtype stores
0.0 in memory as all bits zero.
"d_off64_t"
From d_off64_t.U:
This symbol will be defined if the C compiler supports off64_t.
"d_old_pthread_create_joinable"
From d_pthrattrj.U:
This variable conditionally defines pthread_create_joinable. undef
if pthread.h defines "PTHREAD_CREATE_JOINABLE".
"d_oldpthreads"
From usethreads.U:
This variable conditionally defines the "OLD_PTHREADS_API" symbol,
and indicates that Perl should be built to use the old draft
"POSIX" threads "API". This is only potentially meaningful if
usethreads is set.
"d_oldsock"
From d_socket.U:
This variable conditionally defines the "OLDSOCKET" symbol, which
indicates that the "BSD" socket interface is based on 4.1c and not
4.2.
"d_open3"
From d_open3.U:
This variable conditionally defines the HAS_OPEN3 manifest
constant, which indicates to the C program that the 3 argument
version of the open(2) function is available.
"d_pathconf"
From d_pathconf.U:
This variable conditionally defines the "HAS_PATHCONF" symbol,
which indicates to the C program that the pathconf() routine is
available to determine file-system related limits and options
associated with a given filename.
"d_pause"
From d_pause.U:
This variable conditionally defines the "HAS_PAUSE" symbol, which
indicates to the C program that the pause() routine is available to
suspend a process until a signal is received.
"d_perl_otherlibdirs"
From otherlibdirs.U:
This variable conditionally defines "PERL_OTHERLIBDIRS", which
contains a colon-separated set of paths for the perl binary to
include in @"INC". See also otherlibdirs.
"d_phostname"
From d_gethname.U:
This variable conditionally defines the "HAS_PHOSTNAME" symbol,
which contains the shell command which, when fed to popen(), may be
used to derive the host name.
"d_pipe"
From d_pipe.U:
This variable conditionally defines the "HAS_PIPE" symbol, which
indicates to the C program that the pipe() routine is available to
create an inter-process channel.
"d_poll"
From d_poll.U:
This variable conditionally defines the "HAS_POLL" symbol, which
indicates to the C program that the poll() routine is available to
poll active file descriptors.
"d_portable"
From d_portable.U:
This variable conditionally defines the "PORTABLE" symbol, which
indicates to the C program that it should not assume that it is
running on the machine it was compiled on.
"d_prctl"
From d_prctl.U:
This variable conditionally defines the "HAS_PRCTL" symbol, which
indicates to the C program that the prctl() routine is available.
"d_prctl_set_name"
From d_prctl.U:
This variable conditionally defines the "HAS_PRCTL_SET_NAME"
symbol, which indicates to the C program that the prctl() routine
supports the "PR_SET_NAME" option.
"d_PRId64"
From quadfio.U:
This variable conditionally defines the PERL_PRId64 symbol, which
indicates that stdio has a symbol to print 64-bit decimal numbers.
"d_PRIeldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles.
"d_PRIEUldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles. The "U"
in the name is to separate this from d_PRIeldbl so that even case-
blind systems can see the difference.
"d_PRIfldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles.
"d_PRIFUldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles. The "U"
in the name is to separate this from d_PRIfldbl so that even case-
blind systems can see the difference.
"d_PRIgldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles.
"d_PRIGUldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to print long doubles. The "U"
in the name is to separate this from d_PRIgldbl so that even case-
blind systems can see the difference.
"d_PRIi64"
From quadfio.U:
This variable conditionally defines the PERL_PRIi64 symbol, which
indicates that stdio has a symbol to print 64-bit decimal numbers.
"d_printf_format_null"
From d_attribut.U:
This variable conditionally defines "PRINTF_FORMAT_NULL_OK", which
indicates the C compiler allows printf-like formats to be null.
"d_PRIo64"
From quadfio.U:
This variable conditionally defines the PERL_PRIo64 symbol, which
indicates that stdio has a symbol to print 64-bit octal numbers.
"d_PRIu64"
From quadfio.U:
This variable conditionally defines the PERL_PRIu64 symbol, which
indicates that stdio has a symbol to print 64-bit unsigned decimal
numbers.
"d_PRIx64"
From quadfio.U:
This variable conditionally defines the PERL_PRIx64 symbol, which
indicates that stdio has a symbol to print 64-bit hexadecimal
numbers.
"d_PRIXU64"
From quadfio.U:
This variable conditionally defines the PERL_PRIXU64 symbol, which
indicates that stdio has a symbol to print 64-bit hExADECimAl
numbers. The "U" in the name is to separate this from d_PRIx64 so
that even case-blind systems can see the difference.
"d_procselfexe"
From d_procselfexe.U:
Defined if $procselfexe is symlink to the absolute pathname of the
executing program.
"d_pseudofork"
From d_vfork.U:
This variable conditionally defines the "HAS_PSEUDOFORK" symbol,
which indicates that an emulation of the fork routine is available.
"d_pthread_atfork"
From d_pthread_atfork.U:
This variable conditionally defines the "HAS_PTHREAD_ATFORK"
symbol, which indicates to the C program that the pthread_atfork()
routine is available.
"d_pthread_attr_setscope"
From d_pthread_attr_ss.U:
This variable conditionally defines "HAS_PTHREAD_ATTR_SETSCOPE" if
pthread_attr_setscope() is available to set the contention scope
attribute of a thread attribute object.
"d_pthread_yield"
From d_pthread_y.U:
This variable conditionally defines the "HAS_PTHREAD_YIELD" symbol
if the pthread_yield routine is available to yield the execution of
the current thread.
"d_pwage"
From i_pwd.U:
This variable conditionally defines "PWAGE", which indicates that
struct passwd contains pw_age.
"d_pwchange"
From i_pwd.U:
This variable conditionally defines "PWCHANGE", which indicates
that struct passwd contains pw_change.
"d_pwclass"
From i_pwd.U:
This variable conditionally defines "PWCLASS", which indicates that
struct passwd contains pw_class.
"d_pwcomment"
From i_pwd.U:
This variable conditionally defines "PWCOMMENT", which indicates
that struct passwd contains pw_comment.
"d_pwexpire"
From i_pwd.U:
This variable conditionally defines "PWEXPIRE", which indicates
that struct passwd contains pw_expire.
"d_pwgecos"
From i_pwd.U:
This variable conditionally defines "PWGECOS", which indicates that
struct passwd contains pw_gecos.
"d_pwpasswd"
From i_pwd.U:
This variable conditionally defines "PWPASSWD", which indicates
that struct passwd contains pw_passwd.
"d_pwquota"
From i_pwd.U:
This variable conditionally defines "PWQUOTA", which indicates that
struct passwd contains pw_quota.
"d_qgcvt"
From d_qgcvt.U:
This variable conditionally defines the "HAS_QGCVT" symbol, which
indicates to the C program that the qgcvt() routine is available.
"d_quad"
From quadtype.U:
This variable, if defined, tells that there's a 64-bit integer
type, quadtype.
"d_random_r"
From d_random_r.U:
This variable conditionally defines the "HAS_RANDOM_R" symbol,
which indicates to the C program that the random_r() routine is
available.
"d_readdir"
From d_readdir.U:
This variable conditionally defines "HAS_READDIR" if readdir() is
available to read directory entries.
"d_readdir64_r"
From d_readdir64_r.U:
This variable conditionally defines the HAS_READDIR64_R symbol,
which indicates to the C program that the readdir64_r() routine is
available.
"d_readdir_r"
From d_readdir_r.U:
This variable conditionally defines the "HAS_READDIR_R" symbol,
which indicates to the C program that the readdir_r() routine is
available.
"d_readlink"
From d_readlink.U:
This variable conditionally defines the "HAS_READLINK" symbol,
which indicates to the C program that the readlink() routine is
available to read the value of a symbolic link.
"d_readv"
From d_readv.U:
This variable conditionally defines the "HAS_READV" symbol, which
indicates to the C program that the readv() routine is available.
"d_recvmsg"
From d_recvmsg.U:
This variable conditionally defines the "HAS_RECVMSG" symbol, which
indicates to the C program that the recvmsg() routine is available.
"d_rename"
From d_rename.U:
This variable conditionally defines the "HAS_RENAME" symbol, which
indicates to the C program that the rename() routine is available
to rename files.
"d_rewinddir"
From d_readdir.U:
This variable conditionally defines "HAS_REWINDDIR" if rewinddir()
is available.
"d_rmdir"
From d_rmdir.U:
This variable conditionally defines "HAS_RMDIR" if rmdir() is
available to remove directories.
"d_safebcpy"
From d_safebcpy.U:
This variable conditionally defines the "HAS_SAFE_BCOPY" symbol if
the bcopy() routine can do overlapping copies. Normally, you
should probably use memmove().
"d_safemcpy"
From d_safemcpy.U:
This variable conditionally defines the "HAS_SAFE_MEMCPY" symbol if
the memcpy() routine can do overlapping copies. For overlapping
copies, memmove() should be used, if available.
"d_sanemcmp"
From d_sanemcmp.U:
This variable conditionally defines the "HAS_SANE_MEMCMP" symbol if
the memcpy() routine is available and can be used to compare
relative magnitudes of chars with their high bits set.
"d_sbrkproto"
From d_sbrkproto.U:
This variable conditionally defines the "HAS_SBRK_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the sbrk() function. Otherwise, it is up to the
program to supply one.
"d_scalbnl"
From d_scalbnl.U:
This variable conditionally defines the "HAS_SCALBNL" symbol, which
indicates to the C program that the scalbnl() routine is available.
If ilogbl is also present we can emulate frexpl.
"d_sched_yield"
From d_pthread_y.U:
This variable conditionally defines the "HAS_SCHED_YIELD" symbol if
the sched_yield routine is available to yield the execution of the
current thread.
"d_scm_rights"
From d_socket.U:
This variable conditionally defines the "HAS_SCM_RIGHTS" symbol,
which indicates that the "SCM_RIGHTS" is available. #ifdef is not
enough because it may be an enum, glibc has been known to do this.
"d_SCNfldbl"
From longdblfio.U:
This variable conditionally defines the PERL_PRIfldbl symbol, which
indicates that stdio has a symbol to scan long doubles.
"d_seekdir"
From d_readdir.U:
This variable conditionally defines "HAS_SEEKDIR" if seekdir() is
available.
"d_select"
From d_select.U:
This variable conditionally defines "HAS_SELECT" if select() is
available to select active file descriptors. A <sys/time.h>
inclusion may be necessary for the timeout field.
"d_sem"
From d_sem.U:
This variable conditionally defines the "HAS_SEM" symbol, which
indicates that the entire sem*(2) library is present.
"d_semctl"
From d_semctl.U:
This variable conditionally defines the "HAS_SEMCTL" symbol, which
indicates to the C program that the semctl() routine is available.
"d_semctl_semid_ds"
From d_union_semun.U:
This variable conditionally defines "USE_SEMCTL_SEMID_DS", which
indicates that struct semid_ds * is to be used for semctl
"IPC_STAT".
"d_semctl_semun"
From d_union_semun.U:
This variable conditionally defines "USE_SEMCTL_SEMUN", which
indicates that union semun is to be used for semctl "IPC_STAT".
"d_semget"
From d_semget.U:
This variable conditionally defines the "HAS_SEMGET" symbol, which
indicates to the C program that the semget() routine is available.
"d_semop"
From d_semop.U:
This variable conditionally defines the "HAS_SEMOP" symbol, which
indicates to the C program that the semop() routine is available.
"d_sendmsg"
From d_sendmsg.U:
This variable conditionally defines the "HAS_SENDMSG" symbol, which
indicates to the C program that the sendmsg() routine is available.
"d_setegid"
From d_setegid.U:
This variable conditionally defines the "HAS_SETEGID" symbol, which
indicates to the C program that the setegid() routine is available
to change the effective gid of the current program.
"d_seteuid"
From d_seteuid.U:
This variable conditionally defines the "HAS_SETEUID" symbol, which
indicates to the C program that the seteuid() routine is available
to change the effective uid of the current program.
"d_setgrent"
From d_setgrent.U:
This variable conditionally defines the "HAS_SETGRENT" symbol,
which indicates to the C program that the setgrent() routine is
available for initializing sequential access to the group database.
"d_setgrent_r"
From d_setgrent_r.U:
This variable conditionally defines the "HAS_SETGRENT_R" symbol,
which indicates to the C program that the setgrent_r() routine is
available.
"d_setgrps"
From d_setgrps.U:
This variable conditionally defines the "HAS_SETGROUPS" symbol,
which indicates to the C program that the setgroups() routine is
available to set the list of process groups.
"d_sethent"
From d_sethent.U:
This variable conditionally defines "HAS_SETHOSTENT" if
sethostent() is available.
"d_sethostent_r"
From d_sethostent_r.U:
This variable conditionally defines the "HAS_SETHOSTENT_R" symbol,
which indicates to the C program that the sethostent_r() routine is
available.
"d_setitimer"
From d_setitimer.U:
This variable conditionally defines the "HAS_SETITIMER" symbol,
which indicates to the C program that the setitimer() routine is
available.
"d_setlinebuf"
From d_setlnbuf.U:
This variable conditionally defines the "HAS_SETLINEBUF" symbol,
which indicates to the C program that the setlinebuf() routine is
available to change stderr or stdout from block-buffered or
unbuffered to a line-buffered mode.
"d_setlocale"
From d_setlocale.U:
This variable conditionally defines "HAS_SETLOCALE" if setlocale()
is available to handle locale-specific ctype implementations.
"d_setlocale_r"
From d_setlocale_r.U:
This variable conditionally defines the "HAS_SETLOCALE_R" symbol,
which indicates to the C program that the setlocale_r() routine is
available.
"d_setnent"
From d_setnent.U:
This variable conditionally defines "HAS_SETNETENT" if setnetent()
is available.
"d_setnetent_r"
From d_setnetent_r.U:
This variable conditionally defines the "HAS_SETNETENT_R" symbol,
which indicates to the C program that the setnetent_r() routine is
available.
"d_setpent"
From d_setpent.U:
This variable conditionally defines "HAS_SETPROTOENT" if
setprotoent() is available.
"d_setpgid"
From d_setpgid.U:
This variable conditionally defines the "HAS_SETPGID" symbol if the
setpgid(pid, gpid) function is available to set process group "ID".
"d_setpgrp"
From d_setpgrp.U:
This variable conditionally defines "HAS_SETPGRP" if setpgrp() is
available to set the current process group.
"d_setpgrp2"
From d_setpgrp2.U:
This variable conditionally defines the HAS_SETPGRP2 symbol, which
indicates to the C program that the setpgrp2() (as in DG/"UX")
routine is available to set the current process group.
"d_setprior"
From d_setprior.U:
This variable conditionally defines "HAS_SETPRIORITY" if
setpriority() is available to set a process's priority.
"d_setproctitle"
From d_setproctitle.U:
This variable conditionally defines the "HAS_SETPROCTITLE" symbol,
which indicates to the C program that the setproctitle() routine is
available.
"d_setprotoent_r"
From d_setprotoent_r.U:
This variable conditionally defines the "HAS_SETPROTOENT_R" symbol,
which indicates to the C program that the setprotoent_r() routine
is available.
"d_setpwent"
From d_setpwent.U:
This variable conditionally defines the "HAS_SETPWENT" symbol,
which indicates to the C program that the setpwent() routine is
available for initializing sequential access to the passwd
database.
"d_setpwent_r"
From d_setpwent_r.U:
This variable conditionally defines the "HAS_SETPWENT_R" symbol,
which indicates to the C program that the setpwent_r() routine is
available.
"d_setregid"
From d_setregid.U:
This variable conditionally defines "HAS_SETREGID" if setregid() is
available to change the real and effective gid of the current
process.
"d_setresgid"
From d_setregid.U:
This variable conditionally defines "HAS_SETRESGID" if setresgid()
is available to change the real, effective and saved gid of the
current process.
"d_setresuid"
From d_setreuid.U:
This variable conditionally defines "HAS_SETREUID" if setresuid()
is available to change the real, effective and saved uid of the
current process.
"d_setreuid"
From d_setreuid.U:
This variable conditionally defines "HAS_SETREUID" if setreuid() is
available to change the real and effective uid of the current
process.
"d_setrgid"
From d_setrgid.U:
This variable conditionally defines the "HAS_SETRGID" symbol, which
indicates to the C program that the setrgid() routine is available
to change the real gid of the current program.
"d_setruid"
From d_setruid.U:
This variable conditionally defines the "HAS_SETRUID" symbol, which
indicates to the C program that the setruid() routine is available
to change the real uid of the current program.
"d_setsent"
From d_setsent.U:
This variable conditionally defines "HAS_SETSERVENT" if
setservent() is available.
"d_setservent_r"
From d_setservent_r.U:
This variable conditionally defines the "HAS_SETSERVENT_R" symbol,
which indicates to the C program that the setservent_r() routine is
available.
"d_setsid"
From d_setsid.U:
This variable conditionally defines "HAS_SETSID" if setsid() is
available to set the process group "ID".
"d_setvbuf"
From d_setvbuf.U:
This variable conditionally defines the "HAS_SETVBUF" symbol, which
indicates to the C program that the setvbuf() routine is available
to change buffering on an open stdio stream.
"d_sfio"
From d_sfio.U:
This variable conditionally defines the "USE_SFIO" symbol, and
indicates whether sfio is available (and should be used).
"d_shm"
From d_shm.U:
This variable conditionally defines the "HAS_SHM" symbol, which
indicates that the entire shm*(2) library is present.
"d_shmat"
From d_shmat.U:
This variable conditionally defines the "HAS_SHMAT" symbol, which
indicates to the C program that the shmat() routine is available.
"d_shmatprototype"
From d_shmat.U:
This variable conditionally defines the "HAS_SHMAT_PROTOTYPE"
symbol, which indicates that sys/shm.h has a prototype for shmat.
"d_shmctl"
From d_shmctl.U:
This variable conditionally defines the "HAS_SHMCTL" symbol, which
indicates to the C program that the shmctl() routine is available.
"d_shmdt"
From d_shmdt.U:
This variable conditionally defines the "HAS_SHMDT" symbol, which
indicates to the C program that the shmdt() routine is available.
"d_shmget"
From d_shmget.U:
This variable conditionally defines the "HAS_SHMGET" symbol, which
indicates to the C program that the shmget() routine is available.
"d_sigaction"
From d_sigaction.U:
This variable conditionally defines the "HAS_SIGACTION" symbol,
which indicates that the Vr4 sigaction() routine is available.
"d_signbit"
From d_signbit.U:
This variable conditionally defines the "HAS_SIGNBIT" symbol, which
indicates to the C program that the signbit() routine is available
and safe to use with perl's intern "NV" type.
"d_sigprocmask"
From d_sigprocmask.U:
This variable conditionally defines "HAS_SIGPROCMASK" if
sigprocmask() is available to examine or change the signal mask of
the calling process.
"d_sigsetjmp"
From d_sigsetjmp.U:
This variable conditionally defines the "HAS_SIGSETJMP" symbol,
which indicates that the sigsetjmp() routine is available to call
setjmp() and optionally save the process's signal mask.
"d_sin6_scope_id"
From d_socket.U:
This variable conditionally defines the HAS_SIN6_SCOPE_ID symbol,
which indicates that a struct sockaddr_in6 structure has the
sin6_scope_id member.
"d_sitearch"
From sitearch.U:
This variable conditionally defines "SITEARCH" to hold the pathname
of architecture-dependent library files for $package. If $sitearch
is the same as $archlib, then this is set to undef.
"d_snprintf"
From d_snprintf.U:
This variable conditionally defines the "HAS_SNPRINTF" symbol,
which indicates to the C program that the snprintf () library
function is available.
"d_sockaddr_in6"
From d_socket.U:
This variable conditionally defines the HAS_SOCKADDR_IN6 symbol,
which indicates the availability of a struct sockaddr_in6.
"d_sockaddr_sa_len"
From d_socket.U:
This variable conditionally defines the "HAS_SOCKADDR_SA_LEN"
symbol, which indicates that a struct sockaddr structure has the
sa_len member.
"d_sockatmark"
From d_sockatmark.U:
This variable conditionally defines the "HAS_SOCKATMARK" symbol,
which indicates to the C program that the sockatmark() routine is
available.
"d_sockatmarkproto"
From d_sockatmarkproto.U:
This variable conditionally defines the "HAS_SOCKATMARK_PROTO"
symbol, which indicates to the C program that the system provides a
prototype for the sockatmark() function. Otherwise, it is up to
the program to supply one.
"d_socket"
From d_socket.U:
This variable conditionally defines "HAS_SOCKET", which indicates
that the "BSD" socket interface is supported.
"d_socklen_t"
From d_socklen_t.U:
This symbol will be defined if the C compiler supports socklen_t.
"d_sockpair"
From d_socket.U:
This variable conditionally defines the "HAS_SOCKETPAIR" symbol,
which indicates that the "BSD" socketpair() is supported.
"d_socks5_init"
From d_socks5_init.U:
This variable conditionally defines the HAS_SOCKS5_INIT symbol,
which indicates to the C program that the socks5_init() routine is
available.
"d_sprintf_returns_strlen"
From d_sprintf_len.U:
This variable defines whether sprintf returns the length of the
string (as per the "ANSI" spec). Some C libraries retain
compatibility with pre-"ANSI" C and return a pointer to the passed
in buffer; for these this variable will be undef.
"d_sqrtl"
From d_sqrtl.U:
This variable conditionally defines the "HAS_SQRTL" symbol, which
indicates to the C program that the sqrtl() routine is available.
"d_srand48_r"
From d_srand48_r.U:
This variable conditionally defines the HAS_SRAND48_R symbol, which
indicates to the C program that the srand48_r() routine is
available.
"d_srandom_r"
From d_srandom_r.U:
This variable conditionally defines the "HAS_SRANDOM_R" symbol,
which indicates to the C program that the srandom_r() routine is
available.
"d_sresgproto"
From d_sresgproto.U:
This variable conditionally defines the "HAS_SETRESGID_PROTO"
symbol, which indicates to the C program that the system provides a
prototype for the setresgid() function. Otherwise, it is up to the
program to supply one.
"d_sresuproto"
From d_sresuproto.U:
This variable conditionally defines the "HAS_SETRESUID_PROTO"
symbol, which indicates to the C program that the system provides a
prototype for the setresuid() function. Otherwise, it is up to the
program to supply one.
"d_statblks"
From d_statblks.U:
This variable conditionally defines "USE_STAT_BLOCKS" if this
system has a stat structure declaring st_blksize and st_blocks.
"d_statfs_f_flags"
From d_statfs_f_flags.U:
This variable conditionally defines the "HAS_STRUCT_STATFS_F_FLAGS"
symbol, which indicates to struct statfs from has f_flags member.
This kind of struct statfs is coming from sys/mount.h ("BSD"), not
from sys/statfs.h ("SYSV").
"d_statfs_s"
From d_statfs_s.U:
This variable conditionally defines the "HAS_STRUCT_STATFS" symbol,
which indicates that the struct statfs is supported.
"d_static_inline"
From d_static_inline.U:
This variable conditionally defines the "HAS_STATIC_INLINE" symbol,
which indicates that the C compiler supports C99-style static
inline. That is, the function can't be called from another
translation unit.
"d_statvfs"
From d_statvfs.U:
This variable conditionally defines the "HAS_STATVFS" symbol, which
indicates to the C program that the statvfs() routine is available.
"d_stdio_cnt_lval"
From d_stdstdio.U:
This variable conditionally defines "STDIO_CNT_LVALUE" if the
"FILE_cnt" macro can be used as an lvalue.
"d_stdio_ptr_lval"
From d_stdstdio.U:
This variable conditionally defines "STDIO_PTR_LVALUE" if the
"FILE_ptr" macro can be used as an lvalue.
"d_stdio_ptr_lval_nochange_cnt"
From d_stdstdio.U:
This symbol is defined if using the "FILE_ptr" macro as an lvalue
to increase the pointer by n leaves File_cnt(fp) unchanged.
"d_stdio_ptr_lval_sets_cnt"
From d_stdstdio.U:
This symbol is defined if using the "FILE_ptr" macro as an lvalue
to increase the pointer by n has the side effect of decreasing the
value of File_cnt(fp) by n.
"d_stdio_stream_array"
From stdio_streams.U:
This variable tells whether there is an array holding the stdio
streams.
"d_stdiobase"
From d_stdstdio.U:
This variable conditionally defines "USE_STDIO_BASE" if this system
has a "FILE" structure declaring a usable _base field (or
equivalent) in stdio.h.
"d_stdstdio"
From d_stdstdio.U:
This variable conditionally defines "USE_STDIO_PTR" if this system
has a "FILE" structure declaring usable _ptr and _cnt fields (or
equivalent) in stdio.h.
"d_strchr"
From d_strchr.U:
This variable conditionally defines "HAS_STRCHR" if strchr() and
strrchr() are available for string searching.
"d_strcoll"
From d_strcoll.U:
This variable conditionally defines "HAS_STRCOLL" if strcoll() is
available to compare strings using collating information.
"d_strctcpy"
From d_strctcpy.U:
This variable conditionally defines the "USE_STRUCT_COPY" symbol,
which indicates to the C program that this C compiler knows how to
copy structures.
"d_strerrm"
From d_strerror.U:
This variable holds what Strerrr is defined as to translate an
error code condition into an error message string. It could be
"strerror" or a more "complex" macro emulating strrror with
sys_errlist[], or the "unknown" string when both strerror and
sys_errlist are missing.
"d_strerror"
From d_strerror.U:
This variable conditionally defines "HAS_STRERROR" if strerror() is
available to translate error numbers to strings.
"d_strerror_r"
From d_strerror_r.U:
This variable conditionally defines the "HAS_STRERROR_R" symbol,
which indicates to the C program that the strerror_r() routine is
available.
"d_strftime"
From d_strftime.U:
This variable conditionally defines the "HAS_STRFTIME" symbol,
which indicates to the C program that the strftime() routine is
available.
"d_strlcat"
From d_strlcat.U:
This variable conditionally defines the "HAS_STRLCAT" symbol, which
indicates to the C program that the strlcat () routine is
available.
"d_strlcpy"
From d_strlcpy.U:
This variable conditionally defines the "HAS_STRLCPY" symbol, which
indicates to the C program that the strlcpy () routine is
available.
"d_strtod"
From d_strtod.U:
This variable conditionally defines the "HAS_STRTOD" symbol, which
indicates to the C program that the strtod() routine is available
to provide better numeric string conversion than atof().
"d_strtol"
From d_strtol.U:
This variable conditionally defines the "HAS_STRTOL" symbol, which
indicates to the C program that the strtol() routine is available
to provide better numeric string conversion than atoi() and
friends.
"d_strtold"
From d_strtold.U:
This variable conditionally defines the "HAS_STRTOLD" symbol, which
indicates to the C program that the strtold() routine is available.
"d_strtoll"
From d_strtoll.U:
This variable conditionally defines the "HAS_STRTOLL" symbol, which
indicates to the C program that the strtoll() routine is available.
"d_strtoq"
From d_strtoq.U:
This variable conditionally defines the "HAS_STRTOQ" symbol, which
indicates to the C program that the strtoq() routine is available.
"d_strtoul"
From d_strtoul.U:
This variable conditionally defines the "HAS_STRTOUL" symbol, which
indicates to the C program that the strtoul() routine is available
to provide conversion of strings to unsigned long.
"d_strtoull"
From d_strtoull.U:
This variable conditionally defines the "HAS_STRTOULL" symbol,
which indicates to the C program that the strtoull() routine is
available.
"d_strtouq"
From d_strtouq.U:
This variable conditionally defines the "HAS_STRTOUQ" symbol, which
indicates to the C program that the strtouq() routine is available.
"d_strxfrm"
From d_strxfrm.U:
This variable conditionally defines "HAS_STRXFRM" if strxfrm() is
available to transform strings.
"d_suidsafe"
From d_dosuid.U:
This variable conditionally defines "SETUID_SCRIPTS_ARE_SECURE_NOW"
if setuid scripts can be secure. This test looks in /dev/fd/.
"d_symlink"
From d_symlink.U:
This variable conditionally defines the "HAS_SYMLINK" symbol, which
indicates to the C program that the symlink() routine is available
to create symbolic links.
"d_syscall"
From d_syscall.U:
This variable conditionally defines "HAS_SYSCALL" if syscall() is
available call arbitrary system calls.
"d_syscallproto"
From d_syscallproto.U:
This variable conditionally defines the "HAS_SYSCALL_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the syscall() function. Otherwise, it is up to the
program to supply one.
"d_sysconf"
From d_sysconf.U:
This variable conditionally defines the "HAS_SYSCONF" symbol, which
indicates to the C program that the sysconf() routine is available
to determine system related limits and options.
"d_sysernlst"
From d_strerror.U:
This variable conditionally defines "HAS_SYS_ERRNOLIST" if
sys_errnolist[] is available to translate error numbers to the
symbolic name.
"d_syserrlst"
From d_strerror.U:
This variable conditionally defines "HAS_SYS_ERRLIST" if
sys_errlist[] is available to translate error numbers to strings.
"d_system"
From d_system.U:
This variable conditionally defines "HAS_SYSTEM" if system() is
available to issue a shell command.
"d_tcgetpgrp"
From d_tcgtpgrp.U:
This variable conditionally defines the "HAS_TCGETPGRP" symbol,
which indicates to the C program that the tcgetpgrp() routine is
available. to get foreground process group "ID".
"d_tcsetpgrp"
From d_tcstpgrp.U:
This variable conditionally defines the "HAS_TCSETPGRP" symbol,
which indicates to the C program that the tcsetpgrp() routine is
available to set foreground process group "ID".
"d_telldir"
From d_readdir.U:
This variable conditionally defines "HAS_TELLDIR" if telldir() is
available.
"d_telldirproto"
From d_telldirproto.U:
This variable conditionally defines the "HAS_TELLDIR_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the telldir() function. Otherwise, it is up to the
program to supply one.
"d_time"
From d_time.U:
This variable conditionally defines the "HAS_TIME" symbol, which
indicates that the time() routine exists. The time() routine is
normally provided on "UNIX" systems.
"d_timegm"
From d_timegm.U:
This variable conditionally defines the "HAS_TIMEGM" symbol, which
indicates to the C program that the timegm () routine is available.
"d_times"
From d_times.U:
This variable conditionally defines the "HAS_TIMES" symbol, which
indicates that the times() routine exists. The times() routine is
normally provided on "UNIX" systems. You may have to include
<sys/times.h>.
"d_tm_tm_gmtoff"
From i_time.U:
This variable conditionally defines "HAS_TM_TM_GMTOFF", which
indicates indicates to the C program that the struct tm has the
tm_gmtoff field.
"d_tm_tm_zone"
From i_time.U:
This variable conditionally defines "HAS_TM_TM_ZONE", which
indicates indicates to the C program that the struct tm has the
tm_zone field.
"d_tmpnam_r"
From d_tmpnam_r.U:
This variable conditionally defines the "HAS_TMPNAM_R" symbol,
which indicates to the C program that the tmpnam_r() routine is
available.
"d_truncate"
From d_truncate.U:
This variable conditionally defines "HAS_TRUNCATE" if truncate() is
available to truncate files.
"d_ttyname_r"
From d_ttyname_r.U:
This variable conditionally defines the "HAS_TTYNAME_R" symbol,
which indicates to the C program that the ttyname_r() routine is
available.
"d_tzname"
From d_tzname.U:
This variable conditionally defines "HAS_TZNAME" if tzname[] is
available to access timezone names.
"d_u32align"
From d_u32align.U:
This variable tells whether you must access character data through
U32-aligned pointers.
"d_ualarm"
From d_ualarm.U:
This variable conditionally defines the "HAS_UALARM" symbol, which
indicates to the C program that the ualarm() routine is available.
"d_umask"
From d_umask.U:
This variable conditionally defines the "HAS_UMASK" symbol, which
indicates to the C program that the umask() routine is available.
to set and get the value of the file creation mask.
"d_uname"
From d_gethname.U:
This variable conditionally defines the "HAS_UNAME" symbol, which
indicates to the C program that the uname() routine may be used to
derive the host name.
"d_union_semun"
From d_union_semun.U:
This variable conditionally defines "HAS_UNION_SEMUN" if the union
semun is defined by including <sys/sem.h>.
"d_unordered"
From d_unordered.U:
This variable conditionally defines the "HAS_UNORDERED" symbol,
which indicates to the C program that the unordered() routine is
available.
"d_unsetenv"
From d_unsetenv.U:
This variable conditionally defines the "HAS_UNSETENV" symbol,
which indicates to the C program that the unsetenv () routine is
available.
"d_usleep"
From d_usleep.U:
This variable conditionally defines "HAS_USLEEP" if usleep() is
available to do high granularity sleeps.
"d_usleepproto"
From d_usleepproto.U:
This variable conditionally defines the "HAS_USLEEP_PROTO" symbol,
which indicates to the C program that the system provides a
prototype for the usleep() function. Otherwise, it is up to the
program to supply one.
"d_ustat"
From d_ustat.U:
This variable conditionally defines "HAS_USTAT" if ustat() is
available to query file system statistics by dev_t.
"d_vendorarch"
From vendorarch.U:
This variable conditionally defined "PERL_VENDORARCH".
"d_vendorbin"
From vendorbin.U:
This variable conditionally defines "PERL_VENDORBIN".
"d_vendorlib"
From vendorlib.U:
This variable conditionally defines "PERL_VENDORLIB".
"d_vendorscript"
From vendorscript.U:
This variable conditionally defines "PERL_VENDORSCRIPT".
"d_vfork"
From d_vfork.U:
This variable conditionally defines the "HAS_VFORK" symbol, which
indicates the vfork() routine is available.
"d_void_closedir"
From d_closedir.U:
This variable conditionally defines "VOID_CLOSEDIR" if closedir()
does not return a value.
"d_voidsig"
From d_voidsig.U:
This variable conditionally defines "VOIDSIG" if this system
declares "void (*signal(...))()" in signal.h. The old way was to
declare it as "int (*signal(...))()".
"d_voidtty"
From i_sysioctl.U:
This variable conditionally defines "USE_IOCNOTTY" to indicate that
the ioctl() call with "TIOCNOTTY" should be used to void tty
association. Otherwise (on "USG" probably), it is enough to close
the standard file descriptors and do a setpgrp().
"d_volatile"
From d_volatile.U:
This variable conditionally defines the "HASVOLATILE" symbol, which
indicates to the C program that this C compiler knows about the
volatile declaration.
"d_vprintf"
From d_vprintf.U:
This variable conditionally defines the "HAS_VPRINTF" symbol, which
indicates to the C program that the vprintf() routine is available
to printf with a pointer to an argument list.
"d_vsnprintf"
From d_snprintf.U:
This variable conditionally defines the "HAS_VSNPRINTF" symbol,
which indicates to the C program that the vsnprintf () library
function is available.
"d_wait4"
From d_wait4.U:
This variable conditionally defines the HAS_WAIT4 symbol, which
indicates the wait4() routine is available.
"d_waitpid"
From d_waitpid.U:
This variable conditionally defines "HAS_WAITPID" if waitpid() is
available to wait for child process.
"d_wcstombs"
From d_wcstombs.U:
This variable conditionally defines the "HAS_WCSTOMBS" symbol,
which indicates to the C program that the wcstombs() routine is
available to convert wide character strings to multibyte strings.
"d_wctomb"
From d_wctomb.U:
This variable conditionally defines the "HAS_WCTOMB" symbol, which
indicates to the C program that the wctomb() routine is available
to convert a wide character to a multibyte.
"d_writev"
From d_writev.U:
This variable conditionally defines the "HAS_WRITEV" symbol, which
indicates to the C program that the writev() routine is available.
"d_xenix"
From Guess.U:
This variable conditionally defines the symbol "XENIX", which
alerts the C program that it runs under Xenix.
"date"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the date program. After Configure runs, the
value is reset to a plain "date" and is not useful.
"db_hashtype"
From i_db.U:
This variable contains the type of the hash structure element in
the <db.h> header file. In older versions of "DB", it was int,
while in newer ones it is u_int32_t.
"db_prefixtype"
From i_db.U:
This variable contains the type of the prefix structure element in
the <db.h> header file. In older versions of "DB", it was int,
while in newer ones it is size_t.
"db_version_major"
From i_db.U:
This variable contains the major version number of Berkeley "DB"
found in the <db.h> header file.
"db_version_minor"
From i_db.U:
This variable contains the minor version number of Berkeley "DB"
found in the <db.h> header file. For "DB" version 1 this is always
0.
"db_version_patch"
From i_db.U:
This variable contains the patch version number of Berkeley "DB"
found in the <db.h> header file. For "DB" version 1 this is always
0.
"defvoidused"
From voidflags.U:
This variable contains the default value of the "VOIDUSED" symbol
(15).
"direntrytype"
From i_dirent.U:
This symbol is set to "struct direct" or "struct dirent" depending
on whether dirent is available or not. You should use this pseudo
type to portably declare your directory entries.
"dlext"
From dlext.U:
This variable contains the extension that is to be used for the
dynamically loaded modules that perl generaties.
"dlsrc"
From dlsrc.U:
This variable contains the name of the dynamic loading file that
will be used with the package.
"doublesize"
From doublesize.U:
This variable contains the value of the "DOUBLESIZE" symbol, which
indicates to the C program how many bytes there are in a double.
"drand01"
From randfunc.U:
Indicates the macro to be used to generate normalized random
numbers. Uses randfunc, often divided by (double) (((unsigned
long) 1 << randbits)) in order to normalize the result. In C
programs, the macro "Drand01" is mapped to drand01.
"drand48_r_proto"
From d_drand48_r.U:
This variable encodes the prototype of drand48_r. It is zero if
d_drand48_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_drand48_r is defined.
"dtrace"
From usedtrace.U:
This variable holds the location of the dtrace executable.
"dynamic_ext"
From Extensions.U:
This variable holds a list of "XS" extension files we want to link
dynamically into the package. It is used by Makefile.
e
"eagain"
From nblock_io.U:
This variable bears the symbolic errno code set by read() when no
data is present on the file and non-blocking I/O was enabled
(otherwise, read() blocks naturally).
"ebcdic"
From ebcdic.U:
This variable conditionally defines "EBCDIC" if this system uses
"EBCDIC" encoding. Among other things, this means that the
character ranges are not contiguous. See trnl.U
"echo"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the echo program. After Configure runs, the
value is reset to a plain "echo" and is not useful.
"egrep"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the egrep program. After Configure runs, the
value is reset to a plain "egrep" and is not useful.
"emacs"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"endgrent_r_proto"
From d_endgrent_r.U:
This variable encodes the prototype of endgrent_r. It is zero if
d_endgrent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endgrent_r is defined.
"endhostent_r_proto"
From d_endhostent_r.U:
This variable encodes the prototype of endhostent_r. It is zero if
d_endhostent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endhostent_r is defined.
"endnetent_r_proto"
From d_endnetent_r.U:
This variable encodes the prototype of endnetent_r. It is zero if
d_endnetent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endnetent_r is defined.
"endprotoent_r_proto"
From d_endprotoent_r.U:
This variable encodes the prototype of endprotoent_r. It is zero
if d_endprotoent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endprotoent_r is defined.
"endpwent_r_proto"
From d_endpwent_r.U:
This variable encodes the prototype of endpwent_r. It is zero if
d_endpwent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endpwent_r is defined.
"endservent_r_proto"
From d_endservent_r.U:
This variable encodes the prototype of endservent_r. It is zero if
d_endservent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_endservent_r is defined.
"eunicefix"
From Init.U:
When running under Eunice this variable contains a command which
will convert a shell script to the proper form of text file for it
to be executable by the shell. On other systems it is a no-op.
"exe_ext"
From Unix.U:
This is an old synonym for _exe.
"expr"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the expr program. After Configure runs, the
value is reset to a plain "expr" and is not useful.
"extensions"
From Extensions.U:
This variable holds a list of all extension files (both "XS" and
non-xs linked into the package. It is propagated to Config.pm and
is typically used to test whether a particular extension is
available.
"extern_C"
From Csym.U:
"ANSI" C requires "extern" where C++ requires 'extern "C"'. This
variable can be used in Configure to do the right thing.
"extras"
From Extras.U:
This variable holds a list of extra modules to install.
f
"fflushall"
From fflushall.U:
This symbol, if defined, tells that to flush all pending stdio
output one must loop through all the stdio file handles stored in
an array and fflush them. Note that if fflushNULL is defined,
fflushall will not even be probed for and will be left undefined.
"fflushNULL"
From fflushall.U:
This symbol, if defined, tells that fflush("NULL") does flush all
pending stdio output.
"find"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"firstmakefile"
From Unix.U:
This variable defines the first file searched by make. On unix, it
is makefile (then Makefile). On case-insensitive systems, it might
be something else. This is only used to deal with convoluted make
depend tricks.
"flex"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"fpossize"
From fpossize.U:
This variable contains the size of a fpostype in bytes.
"fpostype"
From fpostype.U:
This variable defines Fpos_t to be something like fpos_t, long,
uint, or whatever type is used to declare file positions in libc.
"freetype"
From mallocsrc.U:
This variable contains the return type of free(). It is usually
void, but occasionally int.
"from"
From Cross.U:
This variable contains the command used by Configure to copy files
from the target host. Useful and available only during Perl build.
The string ":" if not cross-compiling.
"full_ar"
From Loc_ar.U:
This variable contains the full pathname to "ar", whether or not
the user has specified "portability". This is only used in the
Makefile.SH.
"full_csh"
From d_csh.U:
This variable contains the full pathname to "csh", whether or not
the user has specified "portability". This is only used in the
compiled C program, and we assume that all systems which can share
this executable will have the same full pathname to csh.
"full_sed"
From Loc_sed.U:
This variable contains the full pathname to "sed", whether or not
the user has specified "portability". This is only used in the
compiled C program, and we assume that all systems which can share
this executable will have the same full pathname to sed.
g
"gccansipedantic"
From gccvers.U:
If "GNU" cc (gcc) is used, this variable will enable (if set) the
-ansi and -pedantic ccflags for building core files (through cflags
script). (See Porting/pumpkin.pod for full description).
"gccosandvers"
From gccvers.U:
If "GNU" cc (gcc) is used, this variable holds the operating system
and version used to compile gcc. It is set to '' if not gcc, or if
nothing useful can be parsed as the os version.
"gccversion"
From gccvers.U:
If "GNU" cc (gcc) is used, this variable holds 1 or 2 to indicate
whether the compiler is version 1 or 2. This is used in setting
some of the default cflags. It is set to '' if not gcc.
"getgrent_r_proto"
From d_getgrent_r.U:
This variable encodes the prototype of getgrent_r. It is zero if
d_getgrent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getgrent_r is defined.
"getgrgid_r_proto"
From d_getgrgid_r.U:
This variable encodes the prototype of getgrgid_r. It is zero if
d_getgrgid_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getgrgid_r is defined.
"getgrnam_r_proto"
From d_getgrnam_r.U:
This variable encodes the prototype of getgrnam_r. It is zero if
d_getgrnam_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getgrnam_r is defined.
"gethostbyaddr_r_proto"
From d_gethostbyaddr_r.U:
This variable encodes the prototype of gethostbyaddr_r. It is zero
if d_gethostbyaddr_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gethostbyaddr_r is
defined.
"gethostbyname_r_proto"
From d_gethostbyname_r.U:
This variable encodes the prototype of gethostbyname_r. It is zero
if d_gethostbyname_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gethostbyname_r is
defined.
"gethostent_r_proto"
From d_gethostent_r.U:
This variable encodes the prototype of gethostent_r. It is zero if
d_gethostent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_gethostent_r is defined.
"getlogin_r_proto"
From d_getlogin_r.U:
This variable encodes the prototype of getlogin_r. It is zero if
d_getlogin_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getlogin_r is defined.
"getnetbyaddr_r_proto"
From d_getnetbyaddr_r.U:
This variable encodes the prototype of getnetbyaddr_r. It is zero
if d_getnetbyaddr_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getnetbyaddr_r is
defined.
"getnetbyname_r_proto"
From d_getnetbyname_r.U:
This variable encodes the prototype of getnetbyname_r. It is zero
if d_getnetbyname_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getnetbyname_r is
defined.
"getnetent_r_proto"
From d_getnetent_r.U:
This variable encodes the prototype of getnetent_r. It is zero if
d_getnetent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getnetent_r is defined.
"getprotobyname_r_proto"
From d_getprotobyname_r.U:
This variable encodes the prototype of getprotobyname_r. It is
zero if d_getprotobyname_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getprotobyname_r is
defined.
"getprotobynumber_r_proto"
From d_getprotobynumber_r.U:
This variable encodes the prototype of getprotobynumber_r. It is
zero if d_getprotobynumber_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getprotobynumber_r
is defined.
"getprotoent_r_proto"
From d_getprotoent_r.U:
This variable encodes the prototype of getprotoent_r. It is zero
if d_getprotoent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getprotoent_r is defined.
"getpwent_r_proto"
From d_getpwent_r.U:
This variable encodes the prototype of getpwent_r. It is zero if
d_getpwent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getpwent_r is defined.
"getpwnam_r_proto"
From d_getpwnam_r.U:
This variable encodes the prototype of getpwnam_r. It is zero if
d_getpwnam_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getpwnam_r is defined.
"getpwuid_r_proto"
From d_getpwuid_r.U:
This variable encodes the prototype of getpwuid_r. It is zero if
d_getpwuid_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getpwuid_r is defined.
"getservbyname_r_proto"
From d_getservbyname_r.U:
This variable encodes the prototype of getservbyname_r. It is zero
if d_getservbyname_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getservbyname_r is
defined.
"getservbyport_r_proto"
From d_getservbyport_r.U:
This variable encodes the prototype of getservbyport_r. It is zero
if d_getservbyport_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getservbyport_r is
defined.
"getservent_r_proto"
From d_getservent_r.U:
This variable encodes the prototype of getservent_r. It is zero if
d_getservent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getservent_r is defined.
"getspnam_r_proto"
From d_getspnam_r.U:
This variable encodes the prototype of getspnam_r. It is zero if
d_getspnam_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_getspnam_r is defined.
"gidformat"
From gidf.U:
This variable contains the format string used for printing a Gid_t.
"gidsign"
From gidsign.U:
This variable contains the signedness of a gidtype. 1 for
unsigned, -1 for signed.
"gidsize"
From gidsize.U:
This variable contains the size of a gidtype in bytes.
"gidtype"
From gidtype.U:
This variable defines Gid_t to be something like gid_t, int,
ushort, or whatever type is used to declare the return type of
getgid(). Typically, it is the type of group ids in the kernel.
"glibpth"
From libpth.U:
This variable holds the general path (space-separated) used to find
libraries. It may contain directories that do not exist on this
platform, libpth is the cleaned-up version.
"gmake"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the gmake program. After Configure runs, the
value is reset to a plain "gmake" and is not useful.
"gmtime_r_proto"
From d_gmtime_r.U:
This variable encodes the prototype of gmtime_r. It is zero if
d_gmtime_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_gmtime_r is defined.
"gnulibc_version"
From d_gnulibc.U:
This variable contains the version number of the "GNU" C library.
It is usually something like 2.2.5. It is a plain '' if this is
not the "GNU" C library, or if the version is unknown.
"grep"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the grep program. After Configure runs, the
value is reset to a plain "grep" and is not useful.
"groupcat"
From nis.U:
This variable contains a command that produces the text of the
/etc/group file. This is normally "cat /etc/group", but can be
"ypcat group" when "NIS" is used. On some systems, such as os390,
there may be no equivalent command, in which case this variable is
unset.
"groupstype"
From groupstype.U:
This variable defines Groups_t to be something like gid_t, int,
ushort, or whatever type is used for the second argument to
getgroups() and setgroups(). Usually, this is the same as gidtype
(gid_t), but sometimes it isn't.
"gzip"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the gzip program. After Configure runs, the
value is reset to a plain "gzip" and is not useful.
h
"h_fcntl"
From h_fcntl.U:
This is variable gets set in various places to tell i_fcntl that
<fcntl.h> should be included.
"h_sysfile"
From h_sysfile.U:
This is variable gets set in various places to tell i_sys_file that
<sys/file.h> should be included.
"hint"
From Oldconfig.U:
Gives the type of hints used for previous answers. May be one of
"default", "recommended" or "previous".
"hostcat"
From nis.U:
This variable contains a command that produces the text of the
/etc/hosts file. This is normally "cat /etc/hosts", but can be
"ypcat hosts" when "NIS" is used. On some systems, such as os390,
there may be no equivalent command, in which case this variable is
unset.
"html1dir"
From html1dir.U:
This variable contains the name of the directory in which html
source pages are to be put. This directory is for pages that
describe whole programs, not libraries or modules. It is intended
to correspond roughly to section 1 of the Unix manuals.
"html1direxp"
From html1dir.U:
This variable is the same as the html1dir variable, but is filename
expanded at configuration time, for convenient use in makefiles.
"html3dir"
From html3dir.U:
This variable contains the name of the directory in which html
source pages are to be put. This directory is for pages that
describe libraries or modules. It is intended to correspond
roughly to section 3 of the Unix manuals.
"html3direxp"
From html3dir.U:
This variable is the same as the html3dir variable, but is filename
expanded at configuration time, for convenient use in makefiles.
i
"i16size"
From perlxv.U:
This variable is the size of an I16 in bytes.
"i16type"
From perlxv.U:
This variable contains the C type used for Perl's I16.
"i32size"
From perlxv.U:
This variable is the size of an I32 in bytes.
"i32type"
From perlxv.U:
This variable contains the C type used for Perl's I32.
"i64size"
From perlxv.U:
This variable is the size of an I64 in bytes.
"i64type"
From perlxv.U:
This variable contains the C type used for Perl's I64.
"i8size"
From perlxv.U:
This variable is the size of an I8 in bytes.
"i8type"
From perlxv.U:
This variable contains the C type used for Perl's I8.
"i_arpainet"
From i_arpainet.U:
This variable conditionally defines the "I_ARPA_INET" symbol, and
indicates whether a C program should include <arpa/inet.h>.
"i_assert"
From i_assert.U:
This variable conditionally defines the "I_ASSERT" symbol, which
indicates to the C program that <assert.h> exists and could be
included.
"i_bsdioctl"
From i_sysioctl.U:
This variable conditionally defines the "I_SYS_BSDIOCTL" symbol,
which indicates to the C program that <sys/bsdioctl.h> exists and
should be included.
"i_crypt"
From i_crypt.U:
This variable conditionally defines the "I_CRYPT" symbol, and
indicates whether a C program should include <crypt.h>.
"i_db"
From i_db.U:
This variable conditionally defines the "I_DB" symbol, and
indicates whether a C program may include Berkeley's "DB" include
file <db.h>.
"i_dbm"
From i_dbm.U:
This variable conditionally defines the "I_DBM" symbol, which
indicates to the C program that <dbm.h> exists and should be
included.
"i_dirent"
From i_dirent.U:
This variable conditionally defines "I_DIRENT", which indicates to
the C program that it should include <dirent.h>.
"i_dld"
From i_dld.U:
This variable conditionally defines the "I_DLD" symbol, which
indicates to the C program that <dld.h> ("GNU" dynamic loading)
exists and should be included.
"i_dlfcn"
From i_dlfcn.U:
This variable conditionally defines the "I_DLFCN" symbol, which
indicates to the C program that <dlfcn.h> exists and should be
included.
"i_fcntl"
From i_fcntl.U:
This variable controls the value of "I_FCNTL" (which tells the C
program to include <fcntl.h>).
"i_float"
From i_float.U:
This variable conditionally defines the "I_FLOAT" symbol, and
indicates whether a C program may include <float.h> to get symbols
like "DBL_MAX" or "DBL_MIN", i.e. machine dependent floating point
values.
"i_fp"
From i_fp.U:
This variable conditionally defines the "I_FP" symbol, and
indicates whether a C program should include <fp.h>.
"i_fp_class"
From i_fp_class.U:
This variable conditionally defines the "I_FP_CLASS" symbol, and
indicates whether a C program should include <fp_class.h>.
"i_gdbm"
From i_gdbm.U:
This variable conditionally defines the "I_GDBM" symbol, which
indicates to the C program that <gdbm.h> exists and should be
included.
"i_gdbm_ndbm"
From i_ndbm.U:
This variable conditionally defines the "I_GDBM_NDBM" symbol, which
indicates to the C program that <gdbm-ndbm.h> exists and should be
included. This is the location of the ndbm.h compatibility file in
Debian 4.0.
"i_gdbmndbm"
From i_ndbm.U:
This variable conditionally defines the "I_GDBMNDBM" symbol, which
indicates to the C program that <gdbm/ndbm.h> exists and should be
included. This was the location of the ndbm.h compatibility file
in RedHat 7.1.
"i_grp"
From i_grp.U:
This variable conditionally defines the "I_GRP" symbol, and
indicates whether a C program should include <grp.h>.
"i_ieeefp"
From i_ieeefp.U:
This variable conditionally defines the "I_IEEEFP" symbol, and
indicates whether a C program should include <ieeefp.h>.
"i_inttypes"
From i_inttypes.U:
This variable conditionally defines the "I_INTTYPES" symbol, and
indicates whether a C program should include <inttypes.h>.
"i_langinfo"
From i_langinfo.U:
This variable conditionally defines the "I_LANGINFO" symbol, and
indicates whether a C program should include <langinfo.h>.
"i_libutil"
From i_libutil.U:
This variable conditionally defines the "I_LIBUTIL" symbol, and
indicates whether a C program should include <libutil.h>.
"i_limits"
From i_limits.U:
This variable conditionally defines the "I_LIMITS" symbol, and
indicates whether a C program may include <limits.h> to get symbols
like "WORD_BIT" and friends.
"i_locale"
From i_locale.U:
This variable conditionally defines the "I_LOCALE" symbol, and
indicates whether a C program should include <locale.h>.
"i_machcthr"
From i_machcthr.U:
This variable conditionally defines the "I_MACH_CTHREADS" symbol,
and indicates whether a C program should include <mach/cthreads.h>.
"i_malloc"
From i_malloc.U:
This variable conditionally defines the "I_MALLOC" symbol, and
indicates whether a C program should include <malloc.h>.
"i_mallocmalloc"
From i_mallocmalloc.U:
This variable conditionally defines the "I_MALLOCMALLOC" symbol,
and indicates whether a C program should include <malloc/malloc.h>.
"i_math"
From i_math.U:
This variable conditionally defines the "I_MATH" symbol, and
indicates whether a C program may include <math.h>.
"i_memory"
From i_memory.U:
This variable conditionally defines the "I_MEMORY" symbol, and
indicates whether a C program should include <memory.h>.
"i_mntent"
From i_mntent.U:
This variable conditionally defines the "I_MNTENT" symbol, and
indicates whether a C program should include <mntent.h>.
"i_ndbm"
From i_ndbm.U:
This variable conditionally defines the "I_NDBM" symbol, which
indicates to the C program that <ndbm.h> exists and should be
included.
"i_netdb"
From i_netdb.U:
This variable conditionally defines the "I_NETDB" symbol, and
indicates whether a C program should include <netdb.h>.
"i_neterrno"
From i_neterrno.U:
This variable conditionally defines the "I_NET_ERRNO" symbol, which
indicates to the C program that <net/errno.h> exists and should be
included.
"i_netinettcp"
From i_netinettcp.U:
This variable conditionally defines the "I_NETINET_TCP" symbol, and
indicates whether a C program should include <netinet/tcp.h>.
"i_niin"
From i_niin.U:
This variable conditionally defines "I_NETINET_IN", which indicates
to the C program that it should include <netinet/in.h>. Otherwise,
you may try <sys/in.h>.
"i_poll"
From i_poll.U:
This variable conditionally defines the "I_POLL" symbol, and
indicates whether a C program should include <poll.h>.
"i_prot"
From i_prot.U:
This variable conditionally defines the "I_PROT" symbol, and
indicates whether a C program should include <prot.h>.
"i_pthread"
From i_pthread.U:
This variable conditionally defines the "I_PTHREAD" symbol, and
indicates whether a C program should include <pthread.h>.
"i_pwd"
From i_pwd.U:
This variable conditionally defines "I_PWD", which indicates to the
C program that it should include <pwd.h>.
"i_rpcsvcdbm"
From i_dbm.U:
This variable conditionally defines the "I_RPCSVC_DBM" symbol,
which indicates to the C program that <rpcsvc/dbm.h> exists and
should be included. Some System V systems might need this instead
of <dbm.h>.
"i_sfio"
From i_sfio.U:
This variable conditionally defines the "I_SFIO" symbol, and
indicates whether a C program should include <sfio.h>.
"i_sgtty"
From i_termio.U:
This variable conditionally defines the "I_SGTTY" symbol, which
indicates to the C program that it should include <sgtty.h> rather
than <termio.h>.
"i_shadow"
From i_shadow.U:
This variable conditionally defines the "I_SHADOW" symbol, and
indicates whether a C program should include <shadow.h>.
"i_socks"
From i_socks.U:
This variable conditionally defines the "I_SOCKS" symbol, and
indicates whether a C program should include <socks.h>.
"i_stdarg"
From i_varhdr.U:
This variable conditionally defines the "I_STDARG" symbol, which
indicates to the C program that <stdarg.h> exists and should be
included.
"i_stdbool"
From i_stdbool.U:
This variable conditionally defines the "I_STDBOOL" symbol, which
indicates to the C program that <stdbool.h> exists and should be
included.
"i_stddef"
From i_stddef.U:
This variable conditionally defines the "I_STDDEF" symbol, which
indicates to the C program that <stddef.h> exists and should be
included.
"i_stdlib"
From i_stdlib.U:
This variable conditionally defines the "I_STDLIB" symbol, which
indicates to the C program that <stdlib.h> exists and should be
included.
"i_string"
From i_string.U:
This variable conditionally defines the "I_STRING" symbol, which
indicates that <string.h> should be included rather than
<strings.h>.
"i_sunmath"
From i_sunmath.U:
This variable conditionally defines the "I_SUNMATH" symbol, and
indicates whether a C program should include <sunmath.h>.
"i_sysaccess"
From i_sysaccess.U:
This variable conditionally defines the "I_SYS_ACCESS" symbol, and
indicates whether a C program should include <sys/access.h>.
"i_sysdir"
From i_sysdir.U:
This variable conditionally defines the "I_SYS_DIR" symbol, and
indicates whether a C program should include <sys/dir.h>.
"i_sysfile"
From i_sysfile.U:
This variable conditionally defines the "I_SYS_FILE" symbol, and
indicates whether a C program should include <sys/file.h> to get
"R_OK" and friends.
"i_sysfilio"
From i_sysioctl.U:
This variable conditionally defines the "I_SYS_FILIO" symbol, which
indicates to the C program that <sys/filio.h> exists and should be
included in preference to <sys/ioctl.h>.
"i_sysin"
From i_niin.U:
This variable conditionally defines "I_SYS_IN", which indicates to
the C program that it should include <sys/in.h> instead of
<netinet/in.h>.
"i_sysioctl"
From i_sysioctl.U:
This variable conditionally defines the "I_SYS_IOCTL" symbol, which
indicates to the C program that <sys/ioctl.h> exists and should be
included.
"i_syslog"
From i_syslog.U:
This variable conditionally defines the "I_SYSLOG" symbol, and
indicates whether a C program should include <syslog.h>.
"i_sysmman"
From i_sysmman.U:
This variable conditionally defines the "I_SYS_MMAN" symbol, and
indicates whether a C program should include <sys/mman.h>.
"i_sysmode"
From i_sysmode.U:
This variable conditionally defines the "I_SYSMODE" symbol, and
indicates whether a C program should include <sys/mode.h>.
"i_sysmount"
From i_sysmount.U:
This variable conditionally defines the "I_SYSMOUNT" symbol, and
indicates whether a C program should include <sys/mount.h>.
"i_sysndir"
From i_sysndir.U:
This variable conditionally defines the "I_SYS_NDIR" symbol, and
indicates whether a C program should include <sys/ndir.h>.
"i_sysparam"
From i_sysparam.U:
This variable conditionally defines the "I_SYS_PARAM" symbol, and
indicates whether a C program should include <sys/param.h>.
"i_syspoll"
From i_syspoll.U:
This variable conditionally defines the "I_SYS_POLL" symbol, which
indicates to the C program that it should include <sys/poll.h>.
"i_sysresrc"
From i_sysresrc.U:
This variable conditionally defines the "I_SYS_RESOURCE" symbol,
and indicates whether a C program should include <sys/resource.h>.
"i_syssecrt"
From i_syssecrt.U:
This variable conditionally defines the "I_SYS_SECURITY" symbol,
and indicates whether a C program should include <sys/security.h>.
"i_sysselct"
From i_sysselct.U:
This variable conditionally defines "I_SYS_SELECT", which indicates
to the C program that it should include <sys/select.h> in order to
get the definition of struct timeval.
"i_syssockio"
From i_sysioctl.U:
This variable conditionally defines "I_SYS_SOCKIO" to indicate to
the C program that socket ioctl codes may be found in
<sys/sockio.h> instead of <sys/ioctl.h>.
"i_sysstat"
From i_sysstat.U:
This variable conditionally defines the "I_SYS_STAT" symbol, and
indicates whether a C program should include <sys/stat.h>.
"i_sysstatfs"
From i_sysstatfs.U:
This variable conditionally defines the "I_SYSSTATFS" symbol, and
indicates whether a C program should include <sys/statfs.h>.
"i_sysstatvfs"
From i_sysstatvfs.U:
This variable conditionally defines the "I_SYSSTATVFS" symbol, and
indicates whether a C program should include <sys/statvfs.h>.
"i_systime"
From i_time.U:
This variable conditionally defines "I_SYS_TIME", which indicates
to the C program that it should include <sys/time.h>.
"i_systimek"
From i_time.U:
This variable conditionally defines "I_SYS_TIME_KERNEL", which
indicates to the C program that it should include <sys/time.h> with
"KERNEL" defined.
"i_systimes"
From i_systimes.U:
This variable conditionally defines the "I_SYS_TIMES" symbol, and
indicates whether a C program should include <sys/times.h>.
"i_systypes"
From i_systypes.U:
This variable conditionally defines the "I_SYS_TYPES" symbol, and
indicates whether a C program should include <sys/types.h>.
"i_sysuio"
From i_sysuio.U:
This variable conditionally defines the "I_SYSUIO" symbol, and
indicates whether a C program should include <sys/uio.h>.
"i_sysun"
From i_sysun.U:
This variable conditionally defines "I_SYS_UN", which indicates to
the C program that it should include <sys/un.h> to get "UNIX"
domain socket definitions.
"i_sysutsname"
From i_sysutsname.U:
This variable conditionally defines the "I_SYSUTSNAME" symbol, and
indicates whether a C program should include <sys/utsname.h>.
"i_sysvfs"
From i_sysvfs.U:
This variable conditionally defines the "I_SYSVFS" symbol, and
indicates whether a C program should include <sys/vfs.h>.
"i_syswait"
From i_syswait.U:
This variable conditionally defines "I_SYS_WAIT", which indicates
to the C program that it should include <sys/wait.h>.
"i_termio"
From i_termio.U:
This variable conditionally defines the "I_TERMIO" symbol, which
indicates to the C program that it should include <termio.h> rather
than <sgtty.h>.
"i_termios"
From i_termio.U:
This variable conditionally defines the "I_TERMIOS" symbol, which
indicates to the C program that the "POSIX" <termios.h> file is to
be included.
"i_time"
From i_time.U:
This variable conditionally defines "I_TIME", which indicates to
the C program that it should include <time.h>.
"i_unistd"
From i_unistd.U:
This variable conditionally defines the "I_UNISTD" symbol, and
indicates whether a C program should include <unistd.h>.
"i_ustat"
From i_ustat.U:
This variable conditionally defines the "I_USTAT" symbol, and
indicates whether a C program should include <ustat.h>.
"i_utime"
From i_utime.U:
This variable conditionally defines the "I_UTIME" symbol, and
indicates whether a C program should include <utime.h>.
"i_values"
From i_values.U:
This variable conditionally defines the "I_VALUES" symbol, and
indicates whether a C program may include <values.h> to get symbols
like "MAXLONG" and friends.
"i_varargs"
From i_varhdr.U:
This variable conditionally defines "I_VARARGS", which indicates to
the C program that it should include <varargs.h>.
"i_varhdr"
From i_varhdr.U:
Contains the name of the header to be included to get va_dcl
definition. Typically one of varargs.h or stdarg.h.
"i_vfork"
From i_vfork.U:
This variable conditionally defines the "I_VFORK" symbol, and
indicates whether a C program should include vfork.h.
"ignore_versioned_solibs"
From libs.U:
This variable should be non-empty if non-versioned shared libraries
(libfoo.so.x.y) are to be ignored (because they cannot be linked
against).
"inc_version_list"
From inc_version_list.U:
This variable specifies the list of subdirectories in over which
perl.c:incpush() and lib/lib.pm will automatically search when
adding directories to @"INC". The elements in the list are
separated by spaces. This is only useful if you have a perl
library directory tree structured like the default one. See
"INSTALL" for how this works. The versioned site_perl directory
was introduced in 5.005, so that is the lowest possible value.
This list includes architecture-dependent directories back to
version $api_versionstring (e.g. 5.5.640) and architecture-
independent directories all the way back to 5.005.
"inc_version_list_init"
From inc_version_list.U:
This variable holds the same list as inc_version_list, but each
item is enclosed in double quotes and separated by commas, suitable
for use in the "PERL_INC_VERSION_LIST" initialization.
"incpath"
From usrinc.U:
This variable must precede the normal include path to get the right
one, as in $incpath/usr/include or $incpath/usr/lib. Value can be
"" or /bsd43 on mips.
"inews"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"initialinstalllocation"
From bin.U:
When userelocatableinc is true, this variable holds the location
that make install should copy the perl binary to, with all the run-
time relocatable paths calculated from this at install time. When
used, it is initialised to the original value of binexp, and then
binexp is set to .../, as the other binaries are found relative to
the perl binary.
"installarchlib"
From archlib.U:
This variable is really the same as archlibexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installbin"
From bin.U:
This variable is the same as binexp unless "AFS" is running in
which case the user is explicitly prompted for it. This variable
should always be used in your makefiles for maximum portability.
"installhtml1dir"
From html1dir.U:
This variable is really the same as html1direxp, unless you are
using a different installprefix. For extra portability, you should
only use this variable within your makefiles.
"installhtml3dir"
From html3dir.U:
This variable is really the same as html3direxp, unless you are
using a different installprefix. For extra portability, you should
only use this variable within your makefiles.
"installman1dir"
From man1dir.U:
This variable is really the same as man1direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas man1direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installman3dir"
From man3dir.U:
This variable is really the same as man3direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas man3direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installprefix"
From installprefix.U:
This variable holds the name of the directory below which "make
install" will install the package. For most users, this is the
same as prefix. However, it is useful for installing the software
into a different (usually temporary) location after which it can be
bundled up and moved somehow to the final location specified by
prefix.
"installprefixexp"
From installprefix.U:
This variable holds the full absolute path of installprefix with
all ~-expansion done.
"installprivlib"
From privlib.U:
This variable is really the same as privlibexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installscript"
From scriptdir.U:
This variable is usually the same as scriptdirexp, unless you are
on a system running "AFS", in which case they may differ slightly.
You should always use this variable within your makefiles for
portability.
"installsitearch"
From sitearch.U:
This variable is really the same as sitearchexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installsitebin"
From sitebin.U:
This variable is usually the same as sitebinexp, unless you are on
a system running "AFS", in which case they may differ slightly. You
should always use this variable within your makefiles for
portability.
"installsitehtml1dir"
From sitehtml1dir.U:
This variable is really the same as sitehtml1direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas html1direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installsitehtml3dir"
From sitehtml3dir.U:
This variable is really the same as sitehtml3direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas html3direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installsitelib"
From sitelib.U:
This variable is really the same as sitelibexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installsiteman1dir"
From siteman1dir.U:
This variable is really the same as siteman1direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas man1direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installsiteman3dir"
From siteman3dir.U:
This variable is really the same as siteman3direxp, unless you are
using "AFS" in which case it points to the read/write location
whereas man3direxp only points to the read-only access location.
For extra portability, you should only use this variable within
your makefiles.
"installsitescript"
From sitescript.U:
This variable is usually the same as sitescriptexp, unless you are
on a system running "AFS", in which case they may differ slightly.
You should always use this variable within your makefiles for
portability.
"installstyle"
From installstyle.U:
This variable describes the "style" of the perl installation. This
is intended to be useful for tools that need to manipulate entire
perl distributions. Perl itself doesn't use this to find its
libraries -- the library directories are stored directly in
Config.pm. Currently, there are only two styles: "lib" and
lib/perl5. The default library locations (e.g. privlib, sitelib)
are either $prefix/lib or $prefix/lib/perl5. The former is useful
if $prefix is a directory dedicated to perl (e.g. /opt/perl), while
the latter is useful if $prefix is shared by many packages, e.g. if
$prefix=/usr/local.
Unfortunately, while this "style" variable is used to set defaults
for all three directory hierarchies (core, vendor, and site), there
is no guarantee that the same style is actually appropriate for all
those directories. For example, $prefix might be /opt/perl, but
$siteprefix might be /usr/local. (Perhaps, in retrospect, the
"lib" style should never have been supported, but it did seem like
a nice idea at the time.)
The situation is even less clear for tools such as MakeMaker that
can be used to install additional modules into non-standard places.
For example, if a user intends to install a module into a private
directory (perhaps by setting "PREFIX" on the Makefile.PL command
line), then there is no reason to assume that the Configure-time
$installstyle setting will be relevant for that "PREFIX".
This may later be extended to include other information, so be
careful with pattern-matching on the results.
For compatibility with perl5.005 and earlier, the default setting
is based on whether or not $prefix contains the string "perl".
"installusrbinperl"
From instubperl.U:
This variable tells whether Perl should be installed also as
/usr/bin/perl in addition to $installbin/perl
"installvendorarch"
From vendorarch.U:
This variable is really the same as vendorarchexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installvendorbin"
From vendorbin.U:
This variable is really the same as vendorbinexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installvendorhtml1dir"
From vendorhtml1dir.U:
This variable is really the same as vendorhtml1direxp but may
differ on those systems using "AFS". For extra portability, only
this variable should be used in makefiles.
"installvendorhtml3dir"
From vendorhtml3dir.U:
This variable is really the same as vendorhtml3direxp but may
differ on those systems using "AFS". For extra portability, only
this variable should be used in makefiles.
"installvendorlib"
From vendorlib.U:
This variable is really the same as vendorlibexp but may differ on
those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installvendorman1dir"
From vendorman1dir.U:
This variable is really the same as vendorman1direxp but may differ
on those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installvendorman3dir"
From vendorman3dir.U:
This variable is really the same as vendorman3direxp but may differ
on those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"installvendorscript"
From vendorscript.U:
This variable is really the same as vendorscriptexp but may differ
on those systems using "AFS". For extra portability, only this
variable should be used in makefiles.
"intsize"
From intsize.U:
This variable contains the value of the "INTSIZE" symbol, which
indicates to the C program how many bytes there are in an int.
"issymlink"
From issymlink.U:
This variable holds the test command to test for a symbolic link
(if they are supported). Typical values include "test -h" and
"test -L".
"ivdformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"IV" as a signed decimal integer.
"ivsize"
From perlxv.U:
This variable is the size of an "IV" in bytes.
"ivtype"
From perlxv.U:
This variable contains the C type used for Perl's "IV".
k
"known_extensions"
From Extensions.U:
This variable holds a list of all "XS" extensions included in the
package.
"ksh"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
l
"ld"
From dlsrc.U:
This variable indicates the program to be used to link libraries
for dynamic loading. On some systems, it is "ld". On "ELF"
systems, it should be $cc. Mostly, we'll try to respect the hint
file setting.
"ld_can_script"
From dlsrc.U:
This variable shows if the loader accepts scripts in the form of
-Wl,--version-script=ld.script. This is currently only supported
for "GNU" ld on "ELF" in dynamic loading builds.
"lddlflags"
From dlsrc.U:
This variable contains any special flags that might need to be
passed to $ld to create a shared library suitable for dynamic
loading. It is up to the makefile to use it. For hpux, it should
be "-b". For sunos 4.1, it is empty.
"ldflags"
From ccflags.U:
This variable contains any additional C loader flags desired by the
user. It is up to the Makefile to use this.
"ldflags_uselargefiles"
From uselfs.U:
This variable contains the loader flags needed by large file builds
and added to ldflags by hints files.
"ldlibpthname"
From libperl.U:
This variable holds the name of the shared library search path,
often "LD_LIBRARY_PATH". To get an empty string, the hints file
must set this to "none".
"less"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the less program. After Configure runs, the
value is reset to a plain "less" and is not useful.
"lib_ext"
From Unix.U:
This is an old synonym for _a.
"libc"
From libc.U:
This variable contains the location of the C library.
"libperl"
From libperl.U:
The perl executable is obtained by linking perlmain.c with libperl,
any static extensions (usually just DynaLoader), and any other
libraries needed on this system. libperl is usually libperl.a, but
can also be libperl.so.xxx if the user wishes to build a perl
executable with a shared library.
"libpth"
From libpth.U:
This variable holds the general path (space-separated) used to find
libraries. It is intended to be used by other units.
"libs"
From libs.U:
This variable holds the additional libraries we want to use. It is
up to the Makefile to deal with it. The list can be empty.
"libsdirs"
From libs.U:
This variable holds the directory names aka dirnames of the
libraries we found and accepted, duplicates are removed.
"libsfiles"
From libs.U:
This variable holds the filenames aka basenames of the libraries we
found and accepted.
"libsfound"
From libs.U:
This variable holds the full pathnames of the libraries we found
and accepted.
"libspath"
From libs.U:
This variable holds the directory names probed for libraries.
"libswanted"
From Myinit.U:
This variable holds a list of all the libraries we want to search.
The order is chosen to pick up the c library ahead of ucb or bsd
libraries for SVR4.
"libswanted_uselargefiles"
From uselfs.U:
This variable contains the libraries needed by large file builds
and added to ldflags by hints files. It is a space separated list
of the library names without the "lib" prefix or any suffix, just
like libswanted..
"line"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"lint"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"lkflags"
From ccflags.U:
This variable contains any additional C partial linker flags
desired by the user. It is up to the Makefile to use this.
"ln"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the ln program. After Configure runs, the
value is reset to a plain "ln" and is not useful.
"lns"
From lns.U:
This variable holds the name of the command to make symbolic links
(if they are supported). It can be used in the Makefile. It is
either "ln -s" or "ln"
"localtime_r_proto"
From d_localtime_r.U:
This variable encodes the prototype of localtime_r. It is zero if
d_localtime_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_localtime_r is defined.
"locincpth"
From ccflags.U:
This variable contains a list of additional directories to be
searched by the compiler. The appropriate "-I" directives will be
added to ccflags. This is intended to simplify setting local
directories from the Configure command line. It's not much, but it
parallels the loclibpth stuff in libpth.U.
"loclibpth"
From libpth.U:
This variable holds the paths (space-separated) used to find local
libraries. It is prepended to libpth, and is intended to be easily
set from the command line.
"longdblsize"
From d_longdbl.U:
This variable contains the value of the "LONG_DOUBLESIZE" symbol,
which indicates to the C program how many bytes there are in a long
double, if this system supports long doubles.
"longlongsize"
From d_longlong.U:
This variable contains the value of the "LONGLONGSIZE" symbol,
which indicates to the C program how many bytes there are in a long
long, if this system supports long long.
"longsize"
From intsize.U:
This variable contains the value of the "LONGSIZE" symbol, which
indicates to the C program how many bytes there are in a long.
"lp"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"lpr"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"ls"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the ls program. After Configure runs, the
value is reset to a plain "ls" and is not useful.
"lseeksize"
From lseektype.U:
This variable defines lseektype to be something like off_t, long,
or whatever type is used to declare lseek offset's type in the
kernel (which also appears to be lseek's return type).
"lseektype"
From lseektype.U:
This variable defines lseektype to be something like off_t, long,
or whatever type is used to declare lseek offset's type in the
kernel (which also appears to be lseek's return type).
m
"mad"
From mad.U:
This variable indicates that the Misc Attribute Definition code is
to be compiled.
"madlyh"
From mad.U:
If the Misc Attribute Decoration is to be compiled, this variable
is set to the name of the extra header files to be used, else it is
''
"madlyobj"
From mad.U:
If the Misc Attribute Decoration is to be compiled, this variable
is set to the name of the extra object files to be used, else it is
''
"madlysrc"
From mad.U:
If the Misc Attribute Decoration is to be compiled, this variable
is set to the name of the extra C source files to be used, else it
is ''
"mail"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"mailx"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"make"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the make program. After Configure runs, the
value is reset to a plain "make" and is not useful.
"make_set_make"
From make.U:
Some versions of "make" set the variable "MAKE". Others do not.
This variable contains the string to be included in Makefile.SH so
that "MAKE" is set if needed, and not if not needed. Possible
values are:
make_set_make="#" # If your make program handles this for
you,
make_set_make="MAKE=$make" # if it doesn't.
This uses a comment character so that we can distinguish a "set"
value (from a previous config.sh or Configure "-D" option) from an
uncomputed value.
"mallocobj"
From mallocsrc.U:
This variable contains the name of the malloc.o that this package
generates, if that malloc.o is preferred over the system malloc.
Otherwise the value is null. This variable is intended for
generating Makefiles. See mallocsrc.
"mallocsrc"
From mallocsrc.U:
This variable contains the name of the malloc.c that comes with the
package, if that malloc.c is preferred over the system malloc.
Otherwise the value is null. This variable is intended for
generating Makefiles.
"malloctype"
From mallocsrc.U:
This variable contains the kind of ptr returned by malloc and
realloc.
"man1dir"
From man1dir.U:
This variable contains the name of the directory in which manual
source pages are to be put. It is the responsibility of the
Makefile.SH to get the value of this into the proper command. You
must be prepared to do the ~name expansion yourself.
"man1direxp"
From man1dir.U:
This variable is the same as the man1dir variable, but is filename
expanded at configuration time, for convenient use in makefiles.
"man1ext"
From man1dir.U:
This variable contains the extension that the manual page should
have: one of "n", "l", or 1. The Makefile must supply the .. See
man1dir.
"man3dir"
From man3dir.U:
This variable contains the name of the directory in which manual
source pages are to be put. It is the responsibility of the
Makefile.SH to get the value of this into the proper command. You
must be prepared to do the ~name expansion yourself.
"man3direxp"
From man3dir.U:
This variable is the same as the man3dir variable, but is filename
expanded at configuration time, for convenient use in makefiles.
"man3ext"
From man3dir.U:
This variable contains the extension that the manual page should
have: one of "n", "l", or 3. The Makefile must supply the .. See
man3dir.
"mips_type"
From usrinc.U:
This variable holds the environment type for the mips system.
Possible values are "BSD 4.3" and "System V".
"mistrustnm"
From Csym.U:
This variable can be used to establish a fallthrough for the cases
where nm fails to find a symbol. If usenm is false or usenm is
true and mistrustnm is false, this variable has no effect. If
usenm is true and mistrustnm is "compile", a test program will be
compiled to try to find any symbol that can't be located via nm
lookup. If mistrustnm is "run", the test program will be run as
well as being compiled.
"mkdir"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the mkdir program. After Configure runs, the
value is reset to a plain "mkdir" and is not useful.
"mmaptype"
From d_mmap.U:
This symbol contains the type of pointer returned by mmap() (and
simultaneously the type of the first argument). It can be "void *"
or "caddr_t".
"modetype"
From modetype.U:
This variable defines modetype to be something like mode_t, int,
unsigned short, or whatever type is used to declare file modes for
system calls.
"more"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the more program. After Configure runs, the
value is reset to a plain "more" and is not useful.
"multiarch"
From multiarch.U:
This variable conditionally defines the "MULTIARCH" symbol which
signifies the presence of multiplatform files. This is normally
set by hints files.
"mv"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"myarchname"
From archname.U:
This variable holds the architecture name computed by Configure in
a previous run. It is not intended to be perused by any user and
should never be set in a hint file.
"mydomain"
From myhostname.U:
This variable contains the eventual value of the "MYDOMAIN" symbol,
which is the domain of the host the program is going to run on.
The domain must be appended to myhostname to form a complete host
name. The dot comes with mydomain, and need not be supplied by the
program.
"myhostname"
From myhostname.U:
This variable contains the eventual value of the "MYHOSTNAME"
symbol, which is the name of the host the program is going to run
on. The domain is not kept with hostname, but must be gotten from
mydomain. The dot comes with mydomain, and need not be supplied by
the program.
"myuname"
From Oldconfig.U:
The output of "uname -a" if available, otherwise the hostname. On
Xenix, pseudo variables assignments in the output are stripped,
thank you. The whole thing is then lower-cased.
n
"n" From n.U:
This variable contains the "-n" flag if that is what causes the
echo command to suppress newline. Otherwise it is null. Correct
usage is $echo $n "prompt for a question: $c".
"need_va_copy"
From need_va_copy.U:
This symbol, if defined, indicates that the system stores the
variable argument list datatype, va_list, in a format that cannot
be copied by simple assignment, so that some other means must be
used when copying is required. As such systems vary in their
provision (or non-provision) of copying mechanisms, handy.h defines
a platform- "independent" macro, Perl_va_copy(src, dst), to do the
job.
"netdb_hlen_type"
From netdbtype.U:
This variable holds the type used for the 2nd argument to
gethostbyaddr(). Usually, this is int or size_t or unsigned. This
is only useful if you have gethostbyaddr(), naturally.
"netdb_host_type"
From netdbtype.U:
This variable holds the type used for the 1st argument to
gethostbyaddr(). Usually, this is char * or void *, possibly with
or without a const prefix. This is only useful if you have
gethostbyaddr(), naturally.
"netdb_name_type"
From netdbtype.U:
This variable holds the type used for the argument to
gethostbyname(). Usually, this is char * or const char *. This is
only useful if you have gethostbyname(), naturally.
"netdb_net_type"
From netdbtype.U:
This variable holds the type used for the 1st argument to
getnetbyaddr(). Usually, this is int or long. This is only useful
if you have getnetbyaddr(), naturally.
"nm"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the nm program. After Configure runs, the
value is reset to a plain "nm" and is not useful.
"nm_opt"
From usenm.U:
This variable holds the options that may be necessary for nm.
"nm_so_opt"
From usenm.U:
This variable holds the options that may be necessary for nm to
work on a shared library but that can not be used on an archive
library. Currently, this is only used by Linux, where nm --dynamic
is *required* to get symbols from an "ELF" library which has been
stripped, but nm --dynamic is *fatal* on an archive library. Maybe
Linux should just always set usenm=false.
"nonxs_ext"
From Extensions.U:
This variable holds a list of all non-xs extensions included in the
package. All of them will be built.
"nroff"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the nroff program. After Configure runs, the
value is reset to a plain "nroff" and is not useful.
"nv_overflows_integers_at"
From perlxv.U:
This variable gives the largest integer value that NVs can hold as
a constant floating point expression. If it could not be
determined, it holds the value 0.
"nv_preserves_uv_bits"
From perlxv.U:
This variable indicates how many of bits type uvtype a variable
nvtype can preserve.
"nveformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"NV" using %e-ish floating point format.
"nvEUformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"NV" using %E-ish floating point format.
"nvfformat"
From perlxvf.U:
This variable confains the format string used for printing a Perl
"NV" using %f-ish floating point format.
"nvFUformat"
From perlxvf.U:
This variable confains the format string used for printing a Perl
"NV" using %F-ish floating point format.
"nvgformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"NV" using %g-ish floating point format.
"nvGUformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"NV" using %G-ish floating point format.
"nvsize"
From perlxv.U:
This variable is the size of an "NV" in bytes.
"nvtype"
From perlxv.U:
This variable contains the C type used for Perl's "NV".
o
"o_nonblock"
From nblock_io.U:
This variable bears the symbol value to be used during open() or
fcntl() to turn on non-blocking I/O for a file descriptor. If you
wish to switch between blocking and non-blocking, you may try
ioctl("FIOSNBIO") instead, but that is only supported by some
devices.
"obj_ext"
From Unix.U:
This is an old synonym for _o.
"old_pthread_create_joinable"
From d_pthrattrj.U:
This variable defines the constant to use for creating joinable
(aka undetached) pthreads. Unused if pthread.h defines
"PTHREAD_CREATE_JOINABLE". If used, possible values are
"PTHREAD_CREATE_UNDETACHED" and "__UNDETACHED".
"optimize"
From ccflags.U:
This variable contains any optimizer/debugger flag that should be
used. It is up to the Makefile to use it.
"orderlib"
From orderlib.U:
This variable is "true" if the components of libraries must be
ordered (with `lorder $* | tsort`) before placing them in an
archive. Set to "false" if ranlib or ar can generate random
libraries.
"osname"
From Oldconfig.U:
This variable contains the operating system name (e.g. sunos,
solaris, hpux, etc.). It can be useful later on for setting
defaults. Any spaces are replaced with underscores. It is set to
a null string if we can't figure it out.
"osvers"
From Oldconfig.U:
This variable contains the operating system version (e.g. 4.1.3,
5.2, etc.). It is primarily used for helping select an appropriate
hints file, but might be useful elsewhere for setting defaults. It
is set to '' if we can't figure it out. We try to be flexible
about how much of the version number to keep, e.g. if 4.1.1, 4.1.2,
and 4.1.3 are essentially the same for this package, hints files
might just be os_4.0 or os_4.1, etc., not keeping separate files
for each little release.
"otherlibdirs"
From otherlibdirs.U:
This variable contains a colon-separated set of paths for the perl
binary to search for additional library files or modules. These
directories will be tacked to the end of @"INC". Perl will
automatically search below each path for version- and architecture-
specific directories. See inc_version_list for more details. A
value of " " means "none" and is used to preserve this value for
the next run through Configure.
p
"package"
From package.U:
This variable contains the name of the package being constructed.
It is primarily intended for the use of later Configure units.
"pager"
From pager.U:
This variable contains the name of the preferred pager on the
system. Usual values are (the full pathnames of) more, less, pg,
or cat.
"passcat"
From nis.U:
This variable contains a command that produces the text of the
/etc/passwd file. This is normally "cat /etc/passwd", but can be
"ypcat passwd" when "NIS" is used. On some systems, such as os390,
there may be no equivalent command, in which case this variable is
unset.
"patchlevel"
From patchlevel.U:
The patchlevel level of this package. The value of patchlevel
comes from the patchlevel.h file. In a version number such as
5.6.1, this is the 6. In patchlevel.h, this is referred to as
"PERL_VERSION".
"path_sep"
From Unix.U:
This is an old synonym for p_ in Head.U, the character used to
separate elements in the command shell search "PATH".
"perl"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the perl program. After Configure runs, the
value is reset to a plain "perl" and is not useful.
"perl5"
From perl5.U:
This variable contains the full path (if any) to a previously
installed perl5.005 or later suitable for running the script to
determine inc_version_list.
P
"PERL_API_REVISION"
From patchlevel.h:
This number describes the earliest compatible "PERL_REVISION" of
Perl ("compatibility" here being defined as sufficient binary/"API"
compatibility to run "XS" code built with the older version).
Normally this does not change across maintenance releases. Please
read the comment in patchlevel.h.
"PERL_API_SUBVERSION"
From patchlevel.h:
This number describes the earliest compatible "PERL_SUBVERSION" of
Perl ("compatibility" here being defined as sufficient binary/"API"
compatibility to run "XS" code built with the older version).
Normally this does not change across maintenance releases. Please
read the comment in patchlevel.h.
"PERL_API_VERSION"
From patchlevel.h:
This number describes the earliest compatible "PERL_VERSION" of
Perl ("compatibility" here being defined as sufficient binary/"API"
compatibility to run "XS" code built with the older version).
Normally this does not change across maintenance releases. Please
read the comment in patchlevel.h.
"PERL_CONFIG_SH"
From Oldsyms.U:
This is set to "true" in config.sh so that a shell script sourcing
config.sh can tell if it has been sourced already.
"PERL_PATCHLEVEL"
From Oldsyms.U:
This symbol reflects the patchlevel, if available. Will usually
come from the .patch file, which is available when the perl source
tree was fetched with rsync.
"perl_patchlevel"
From patchlevel.U:
This is the Perl patch level, a numeric change identifier, as
defined by whichever source code maintenance system is used to
maintain the patches; currently Perforce. It does not correlate
with the Perl version numbers or the maintenance versus development
dichotomy except by also being increasing.
"PERL_REVISION"
From Oldsyms.U:
In a Perl version number such as 5.6.2, this is the 5. This value
is manually set in patchlevel.h
"perl_static_inline"
From d_static_inline.U:
This variable defines the "PERL_STATIC_INLINE" symbol to the best-
guess incantation to use for static inline functions.
Possibilities include static inline (c99) static __inline__
(gcc -ansi) static __inline ("MSVC") static _inline (older
"MSVC") static (c89 compilers)
"PERL_SUBVERSION"
From Oldsyms.U:
In a Perl version number such as 5.6.2, this is the 2. Values
greater than 50 represent potentially unstable development
subversions. This value is manually set in patchlevel.h
"PERL_VERSION"
From Oldsyms.U:
In a Perl version number such as 5.6.2, this is the 6. This value
is manually set in patchlevel.h
"perladmin"
From perladmin.U:
Electronic mail address of the perl5 administrator.
"perllibs"
From End.U:
The list of libraries needed by Perl only (any libraries needed by
extensions only will by dropped, if using dynamic loading).
"perlpath"
From perlpath.U:
This variable contains the eventual value of the "PERLPATH" symbol,
which contains the name of the perl interpreter to be used in shell
scripts and in the "eval "exec"" idiom. This variable is not
necessarily the pathname of the file containing the perl
interpreter; you must append the executable extension (_exe) if it
is not already present. Note that Perl code that runs during the
Perl build process cannot reference this variable, as Perl may not
have been installed, or even if installed, may be a different
version of Perl.
"pg"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the pg program. After Configure runs, the
value is reset to a plain "pg" and is not useful.
"phostname"
From myhostname.U:
This variable contains the eventual value of the "PHOSTNAME"
symbol, which is a command that can be fed to popen() to get the
host name. The program should probably not presume that the domain
is or isn't there already.
"pidtype"
From pidtype.U:
This variable defines "PIDTYPE" to be something like pid_t, int,
ushort, or whatever type is used to declare process ids in the
kernel.
"plibpth"
From libpth.U:
Holds the private path used by Configure to find out the libraries.
Its value is prepend to libpth. This variable takes care of special
machines, like the mips. Usually, it should be empty.
"pmake"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"pr"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"prefix"
From prefix.U:
This variable holds the name of the directory below which the user
will install the package. Usually, this is /usr/local, and
executables go in /usr/local/bin, library stuff in /usr/local/lib,
man pages in /usr/local/man, etc. It is only used to set defaults
for things in bin.U, mansrc.U, privlib.U, or scriptdir.U.
"prefixexp"
From prefix.U:
This variable holds the full absolute path of the directory below
which the user will install the package. Derived from prefix.
"privlib"
From privlib.U:
This variable contains the eventual value of the "PRIVLIB" symbol,
which is the name of the private library for this package. It may
have a ~ on the front. It is up to the makefile to eventually
create this directory while performing installation (with ~
substitution).
"privlibexp"
From privlib.U:
This variable is the ~name expanded version of privlib, so that you
may use it directly in Makefiles or shell scripts.
"procselfexe"
From d_procselfexe.U:
If d_procselfexe is defined, $procselfexe is the filename of the
symbolic link pointing to the absolute pathname of the executing
program.
"prototype"
From prototype.U:
This variable holds the eventual value of "CAN_PROTOTYPE", which
indicates the C compiler can handle funciton prototypes.
"ptrsize"
From ptrsize.U:
This variable contains the value of the "PTRSIZE" symbol, which
indicates to the C program how many bytes there are in a pointer.
q
"quadkind"
From quadtype.U:
This variable, if defined, encodes the type of a quad: 1 = int, 2 =
long, 3 = long long, 4 = int64_t.
"quadtype"
From quadtype.U:
This variable defines Quad_t to be something like long, int, long
long, int64_t, or whatever type is used for 64-bit integers.
r
"randbits"
From randfunc.U:
Indicates how many bits are produced by the function used to
generate normalized random numbers.
"randfunc"
From randfunc.U:
Indicates the name of the random number function to use. Values
include drand48, random, and rand. In C programs, the "Drand01"
macro is defined to generate uniformly distributed random numbers
over the range [0., 1.[ (see drand01 and nrand).
"random_r_proto"
From d_random_r.U:
This variable encodes the prototype of random_r. It is zero if
d_random_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_random_r is defined.
"randseedtype"
From randfunc.U:
Indicates the type of the argument of the seedfunc.
"ranlib"
From orderlib.U:
This variable is set to the pathname of the ranlib program, if it
is needed to generate random libraries. Set to ":" if ar can
generate random libraries or if random libraries are not supported
"rd_nodata"
From nblock_io.U:
This variable holds the return code from read() when no data is
present. It should be -1, but some systems return 0 when "O_NDELAY"
is used, which is a shame because you cannot make the difference
between no data and an EOF.. Sigh!
"readdir64_r_proto"
From d_readdir64_r.U:
This variable encodes the prototype of readdir64_r. It is zero if
d_readdir64_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_readdir64_r is defined.
"readdir_r_proto"
From d_readdir_r.U:
This variable encodes the prototype of readdir_r. It is zero if
d_readdir_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_readdir_r is defined.
"revision"
From patchlevel.U:
The value of revision comes from the patchlevel.h file. In a
version number such as 5.6.1, this is the 5. In patchlevel.h, this
is referred to as "PERL_REVISION".
"rm"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the rm program. After Configure runs, the
value is reset to a plain "rm" and is not useful.
"rm_try"
From Unix.U:
This is a cleanup variable for try test programs. Internal
Configure use only.
"rmail"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"run"
From Cross.U:
This variable contains the command used by Configure to copy and
execute a cross-compiled executable in the target host. Useful and
available only during Perl build. Empty string '' if not cross-
compiling.
"runnm"
From usenm.U:
This variable contains "true" or "false" depending whether the nm
extraction should be performed or not, according to the value of
usenm and the flags on the Configure command line.
s
"sched_yield"
From d_pthread_y.U:
This variable defines the way to yield the execution of the current
thread.
"scriptdir"
From scriptdir.U:
This variable holds the name of the directory in which the user
wants to put publicly scripts for the package in question. It is
either the same directory as for binaries, or a special one that
can be mounted across different architectures, like /usr/share.
Programs must be prepared to deal with ~name expansion.
"scriptdirexp"
From scriptdir.U:
This variable is the same as scriptdir, but is filename expanded at
configuration time, for programs not wanting to bother with it.
"sed"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the sed program. After Configure runs, the
value is reset to a plain "sed" and is not useful.
"seedfunc"
From randfunc.U:
Indicates the random number generating seed function. Values
include srand48, srandom, and srand.
"selectminbits"
From selectminbits.U:
This variable holds the minimum number of bits operated by select.
That is, if you do select(n, ...), how many bits at least will be
cleared in the masks if some activity is detected. Usually this is
either n or 32*ceil(n/32), especially many little-endians do the
latter. This is only useful if you have select(), naturally.
"selecttype"
From selecttype.U:
This variable holds the type used for the 2nd, 3rd, and 4th
arguments to select. Usually, this is "fd_set *", if "HAS_FD_SET"
is defined, and "int *" otherwise. This is only useful if you have
select(), naturally.
"sendmail"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"setgrent_r_proto"
From d_setgrent_r.U:
This variable encodes the prototype of setgrent_r. It is zero if
d_setgrent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setgrent_r is defined.
"sethostent_r_proto"
From d_sethostent_r.U:
This variable encodes the prototype of sethostent_r. It is zero if
d_sethostent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_sethostent_r is defined.
"setlocale_r_proto"
From d_setlocale_r.U:
This variable encodes the prototype of setlocale_r. It is zero if
d_setlocale_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setlocale_r is defined.
"setnetent_r_proto"
From d_setnetent_r.U:
This variable encodes the prototype of setnetent_r. It is zero if
d_setnetent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setnetent_r is defined.
"setprotoent_r_proto"
From d_setprotoent_r.U:
This variable encodes the prototype of setprotoent_r. It is zero
if d_setprotoent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setprotoent_r is defined.
"setpwent_r_proto"
From d_setpwent_r.U:
This variable encodes the prototype of setpwent_r. It is zero if
d_setpwent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setpwent_r is defined.
"setservent_r_proto"
From d_setservent_r.U:
This variable encodes the prototype of setservent_r. It is zero if
d_setservent_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_setservent_r is defined.
"sGMTIME_max"
From time_size.U:
This variable defines the maximum value of the time_t offset that
the system function gmtime () accepts
"sGMTIME_min"
From time_size.U:
This variable defines the minimum value of the time_t offset that
the system function gmtime () accepts
"sh"
From sh.U:
This variable contains the full pathname of the shell used on this
system to execute Bourne shell scripts. Usually, this will be
/bin/sh, though it's possible that some systems will have /bin/ksh,
/bin/pdksh, /bin/ash, /bin/bash, or even something such as
D:/bin/sh.exe. This unit comes before Options.U, so you can't set
sh with a "-D" option, though you can override this (and startsh)
with "-O -Dsh=/bin/whatever -Dstartsh=whatever"
"shar"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"sharpbang"
From spitshell.U:
This variable contains the string #! if this system supports that
construct.
"shmattype"
From d_shmat.U:
This symbol contains the type of pointer returned by shmat(). It
can be "void *" or "char *".
"shortsize"
From intsize.U:
This variable contains the value of the "SHORTSIZE" symbol which
indicates to the C program how many bytes there are in a short.
"shrpenv"
From libperl.U:
If the user builds a shared libperl.so, then we need to tell the
"perl" executable where it will be able to find the installed
libperl.so. One way to do this on some systems is to set the
environment variable "LD_RUN_PATH" to the directory that will be
the final location of the shared libperl.so. The makefile can use
this with something like $shrpenv $("CC") -o perl perlmain.o
$libperl $libs Typical values are shrpenv="env
"LD_RUN_PATH"=$archlibexp/"CORE"" or shrpenv='' See the main perl
Makefile.SH for actual working usage. Alternatively, we might be
able to use a command line option such as -R $archlibexp/"CORE"
(Solaris) or -Wl,-rpath $archlibexp/"CORE" (Linux).
"shsharp"
From spitshell.U:
This variable tells further Configure units whether your sh can
handle # comments.
"sig_count"
From sig_name.U:
This variable holds a number larger than the largest valid signal
number. This is usually the same as the "NSIG" macro.
"sig_name"
From sig_name.U:
This variable holds the signal names, space separated. The leading
"SIG" in signal name is removed. A "ZERO" is prepended to the
list. This is currently not used, sig_name_init is used instead.
"sig_name_init"
From sig_name.U:
This variable holds the signal names, enclosed in double quotes and
separated by commas, suitable for use in the "SIG_NAME" definition
below. A "ZERO" is prepended to the list, and the list is
terminated with a plain 0. The leading "SIG" in signal names is
removed. See sig_num.
"sig_num"
From sig_name.U:
This variable holds the signal numbers, space separated. A "ZERO"
is prepended to the list (corresponding to the fake "SIGZERO").
Those numbers correspond to the value of the signal listed in the
same place within the sig_name list. This is currently not used,
sig_num_init is used instead.
"sig_num_init"
From sig_name.U:
This variable holds the signal numbers, enclosed in double quotes
and separated by commas, suitable for use in the "SIG_NUM"
definition below. A "ZERO" is prepended to the list, and the list
is terminated with a plain 0.
"sig_size"
From sig_name.U:
This variable contains the number of elements of the sig_name and
sig_num arrays.
"signal_t"
From d_voidsig.U:
This variable holds the type of the signal handler (void or int).
"sitearch"
From sitearch.U:
This variable contains the eventual value of the "SITEARCH" symbol,
which is the name of the private library for this package. It may
have a ~ on the front. It is up to the makefile to eventually
create this directory while performing installation (with ~
substitution). The standard distribution will put nothing in this
directory. After perl has been installed, users may install their
own local architecture-dependent modules in this directory with
MakeMaker Makefile.PL or equivalent. See "INSTALL" for details.
"sitearchexp"
From sitearch.U:
This variable is the ~name expanded version of sitearch, so that
you may use it directly in Makefiles or shell scripts.
"sitebin"
From sitebin.U:
This variable holds the name of the directory in which the user
wants to put add-on publicly executable files for the package in
question. It is most often a local directory such as
/usr/local/bin. Programs using this variable must be prepared to
deal with ~name substitution. The standard distribution will put
nothing in this directory. After perl has been installed, users
may install their own local executables in this directory with
MakeMaker Makefile.PL or equivalent. See "INSTALL" for details.
"sitebinexp"
From sitebin.U:
This is the same as the sitebin variable, but is filename expanded
at configuration time, for use in your makefiles.
"sitehtml1dir"
From sitehtml1dir.U:
This variable contains the name of the directory in which site-
specific html source pages are to be put. It is the responsibility
of the Makefile.SH to get the value of this into the proper
command. You must be prepared to do the ~name expansion yourself.
The standard distribution will put nothing in this directory.
After perl has been installed, users may install their own local
html pages in this directory with MakeMaker Makefile.PL or
equivalent. See "INSTALL" for details.
"sitehtml1direxp"
From sitehtml1dir.U:
This variable is the same as the sitehtml1dir variable, but is
filename expanded at configuration time, for convenient use in
makefiles.
"sitehtml3dir"
From sitehtml3dir.U:
This variable contains the name of the directory in which site-
specific library html source pages are to be put. It is the
responsibility of the Makefile.SH to get the value of this into the
proper command. You must be prepared to do the ~name expansion
yourself. The standard distribution will put nothing in this
directory. After perl has been installed, users may install their
own local library html pages in this directory with MakeMaker
Makefile.PL or equivalent. See "INSTALL" for details.
"sitehtml3direxp"
From sitehtml3dir.U:
This variable is the same as the sitehtml3dir variable, but is
filename expanded at configuration time, for convenient use in
makefiles.
"sitelib"
From sitelib.U:
This variable contains the eventual value of the "SITELIB" symbol,
which is the name of the private library for this package. It may
have a ~ on the front. It is up to the makefile to eventually
create this directory while performing installation (with ~
substitution). The standard distribution will put nothing in this
directory. After perl has been installed, users may install their
own local architecture-independent modules in this directory with
MakeMaker Makefile.PL or equivalent. See "INSTALL" for details.
"sitelib_stem"
From sitelib.U:
This variable is $sitelibexp with any trailing version-specific
component removed. The elements in inc_version_list
(inc_version_list.U) can be tacked onto this variable to generate a
list of directories to search.
"sitelibexp"
From sitelib.U:
This variable is the ~name expanded version of sitelib, so that you
may use it directly in Makefiles or shell scripts.
"siteman1dir"
From siteman1dir.U:
This variable contains the name of the directory in which site-
specific manual source pages are to be put. It is the
responsibility of the Makefile.SH to get the value of this into the
proper command. You must be prepared to do the ~name expansion
yourself. The standard distribution will put nothing in this
directory. After perl has been installed, users may install their
own local man1 pages in this directory with MakeMaker Makefile.PL
or equivalent. See "INSTALL" for details.
"siteman1direxp"
From siteman1dir.U:
This variable is the same as the siteman1dir variable, but is
filename expanded at configuration time, for convenient use in
makefiles.
"siteman3dir"
From siteman3dir.U:
This variable contains the name of the directory in which site-
specific library man source pages are to be put. It is the
responsibility of the Makefile.SH to get the value of this into the
proper command. You must be prepared to do the ~name expansion
yourself. The standard distribution will put nothing in this
directory. After perl has been installed, users may install their
own local man3 pages in this directory with MakeMaker Makefile.PL
or equivalent. See "INSTALL" for details.
"siteman3direxp"
From siteman3dir.U:
This variable is the same as the siteman3dir variable, but is
filename expanded at configuration time, for convenient use in
makefiles.
"siteprefix"
From siteprefix.U:
This variable holds the full absolute path of the directory below
which the user will install add-on packages. See "INSTALL" for
usage and examples.
"siteprefixexp"
From siteprefix.U:
This variable holds the full absolute path of the directory below
which the user will install add-on packages. Derived from
siteprefix.
"sitescript"
From sitescript.U:
This variable holds the name of the directory in which the user
wants to put add-on publicly executable files for the package in
question. It is most often a local directory such as
/usr/local/bin. Programs using this variable must be prepared to
deal with ~name substitution. The standard distribution will put
nothing in this directory. After perl has been installed, users
may install their own local scripts in this directory with
MakeMaker Makefile.PL or equivalent. See "INSTALL" for details.
"sitescriptexp"
From sitescript.U:
This is the same as the sitescript variable, but is filename
expanded at configuration time, for use in your makefiles.
"sizesize"
From sizesize.U:
This variable contains the size of a sizetype in bytes.
"sizetype"
From sizetype.U:
This variable defines sizetype to be something like size_t,
unsigned long, or whatever type is used to declare length
parameters for string functions.
"sleep"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"sLOCALTIME_max"
From time_size.U:
This variable defines the maximum value of the time_t offset that
the system function localtime () accepts
"sLOCALTIME_min"
From time_size.U:
This variable defines the minimum value of the time_t offset that
the system function localtime () accepts
"smail"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"so"
From so.U:
This variable holds the extension used to identify shared libraries
(also known as shared objects) on the system. Usually set to "so".
"sockethdr"
From d_socket.U:
This variable has any cpp "-I" flags needed for socket support.
"socketlib"
From d_socket.U:
This variable has the names of any libraries needed for socket
support.
"socksizetype"
From socksizetype.U:
This variable holds the type used for the size argument for various
socket calls like accept. Usual values include socklen_t, size_t,
and int.
"sort"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the sort program. After Configure runs, the
value is reset to a plain "sort" and is not useful.
"spackage"
From package.U:
This variable contains the name of the package being constructed,
with the first letter uppercased, i.e. suitable for starting
sentences.
"spitshell"
From spitshell.U:
This variable contains the command necessary to spit out a runnable
shell on this system. It is either cat or a grep "-v" for #
comments.
"sPRId64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit decimal numbers (format "d") for output.
"sPRIeldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "e") for output.
"sPRIEUldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "E") for output. The "U" in the name
is to separate this from sPRIeldbl so that even case-blind systems
can see the difference.
"sPRIfldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "f") for output.
"sPRIFUldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "F") for output. The "U" in the name
is to separate this from sPRIfldbl so that even case-blind systems
can see the difference.
"sPRIgldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "g") for output.
"sPRIGUldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "G") for output. The "U" in the name
is to separate this from sPRIgldbl so that even case-blind systems
can see the difference.
"sPRIi64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit decimal numbers (format "i") for output.
"sPRIo64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit octal numbers (format "o") for output.
"sPRIu64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit unsigned decimal numbers (format "u") for output.
"sPRIx64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit hexadecimal numbers (format "x") for output.
"sPRIXU64"
From quadfio.U:
This variable, if defined, contains the string used by stdio to
format 64-bit hExADECimAl numbers (format "X") for output. The "U"
in the name is to separate this from sPRIx64 so that even case-
blind systems can see the difference.
"srand48_r_proto"
From d_srand48_r.U:
This variable encodes the prototype of srand48_r. It is zero if
d_srand48_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_srand48_r is defined.
"srandom_r_proto"
From d_srandom_r.U:
This variable encodes the prototype of srandom_r. It is zero if
d_srandom_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_srandom_r is defined.
"src"
From src.U:
This variable holds the (possibly relative) path of the package
source. It is up to the Makefile to use this variable and set
"VPATH" accordingly to find the sources remotely. Use $pkgsrc to
have an absolute path.
"sSCNfldbl"
From longdblfio.U:
This variable, if defined, contains the string used by stdio to
format long doubles (format "f") for input.
"ssizetype"
From ssizetype.U:
This variable defines ssizetype to be something like ssize_t, long
or int. It is used by functions that return a count of bytes or an
error condition. It must be a signed type. We will pick a type
such that sizeof(SSize_t) == sizeof(Size_t).
"st_ino_sign"
From st_ino_def.U:
This variable contains the signedness of struct stat's st_ino. 1
for unsigned, -1 for signed.
"st_ino_size"
From st_ino_def.U:
This variable contains the size of struct stat's st_ino in bytes.
"startperl"
From startperl.U:
This variable contains the string to put on the front of a perl
script to make sure (hopefully) that it runs with perl and not some
shell. Of course, that leading line must be followed by the
classical perl idiom: eval 'exec perl -S $0 ${1+$@}' if
$running_under_some_shell; to guarantee perl startup should the
shell execute the script. Note that this magic incantation is not
understood by csh.
"startsh"
From startsh.U:
This variable contains the string to put on the front of a shell
script to make sure (hopefully) that it runs with sh and not some
other shell.
"static_ext"
From Extensions.U:
This variable holds a list of "XS" extension files we want to link
statically into the package. It is used by Makefile.
"stdchar"
From stdchar.U:
This variable conditionally defines "STDCHAR" to be the type of
char used in stdio.h. It has the values "unsigned char" or "char".
"stdio_base"
From d_stdstdio.U:
This variable defines how, given a "FILE" pointer, fp, to access
the _base field (or equivalent) of stdio.h's "FILE" structure.
This will be used to define the macro FILE_base(fp).
"stdio_bufsiz"
From d_stdstdio.U:
This variable defines how, given a "FILE" pointer, fp, to determine
the number of bytes store in the I/O buffer pointer to by the _base
field (or equivalent) of stdio.h's "FILE" structure. This will be
used to define the macro FILE_bufsiz(fp).
"stdio_cnt"
From d_stdstdio.U:
This variable defines how, given a "FILE" pointer, fp, to access
the _cnt field (or equivalent) of stdio.h's "FILE" structure. This
will be used to define the macro FILE_cnt(fp).
"stdio_filbuf"
From d_stdstdio.U:
This variable defines how, given a "FILE" pointer, fp, to tell
stdio to refill its internal buffers (?). This will be used to
define the macro FILE_filbuf(fp).
"stdio_ptr"
From d_stdstdio.U:
This variable defines how, given a "FILE" pointer, fp, to access
the _ptr field (or equivalent) of stdio.h's "FILE" structure. This
will be used to define the macro FILE_ptr(fp).
"stdio_stream_array"
From stdio_streams.U:
This variable tells the name of the array holding the stdio
streams. Usual values include _iob, __iob, and __sF.
"strerror_r_proto"
From d_strerror_r.U:
This variable encodes the prototype of strerror_r. It is zero if
d_strerror_r is undef, and one of the "REENTRANT_PROTO_T_ABC"
macros of reentr.h if d_strerror_r is defined.
"strings"
From i_string.U:
This variable holds the full path of the string header that will be
used. Typically /usr/include/string.h or /usr/include/strings.h.
"submit"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"subversion"
From patchlevel.U:
The subversion level of this package. The value of subversion
comes from the patchlevel.h file. In a version number such as
5.6.1, this is the 1. In patchlevel.h, this is referred to as
"PERL_SUBVERSION". This is unique to perl.
"sysman"
From sysman.U:
This variable holds the place where the manual is located on this
system. It is not the place where the user wants to put his manual
pages. Rather it is the place where Configure may look to find
manual for unix commands (section 1 of the manual usually). See
mansrc.
t
"tail"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"tar"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"targetarch"
From Cross.U:
If cross-compiling, this variable contains the target architecture.
If not, this will be empty.
"tbl"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"tee"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"test"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the test program. After Configure runs, the
value is reset to a plain "test" and is not useful.
"timeincl"
From i_time.U:
This variable holds the full path of the included time header(s).
"timetype"
From d_time.U:
This variable holds the type returned by time(). It can be long, or
time_t on "BSD" sites (in which case <sys/types.h> should be
included). Anyway, the type Time_t should be used.
"tmpnam_r_proto"
From d_tmpnam_r.U:
This variable encodes the prototype of tmpnam_r. It is zero if
d_tmpnam_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_tmpnam_r is defined.
"to"
From Cross.U:
This variable contains the command used by Configure to copy to
from the target host. Useful and available only during Perl build.
The string ":" if not cross-compiling.
"touch"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the touch program. After Configure runs, the
value is reset to a plain "touch" and is not useful.
"tr"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the tr program. After Configure runs, the
value is reset to a plain "tr" and is not useful.
"trnl"
From trnl.U:
This variable contains the value to be passed to the tr(1) command
to transliterate a newline. Typical values are "\012" and "\n".
This is needed for "EBCDIC" systems where newline is not
necessarily "\012".
"troff"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"ttyname_r_proto"
From d_ttyname_r.U:
This variable encodes the prototype of ttyname_r. It is zero if
d_ttyname_r is undef, and one of the "REENTRANT_PROTO_T_ABC" macros
of reentr.h if d_ttyname_r is defined.
u
"u16size"
From perlxv.U:
This variable is the size of an U16 in bytes.
"u16type"
From perlxv.U:
This variable contains the C type used for Perl's U16.
"u32size"
From perlxv.U:
This variable is the size of an U32 in bytes.
"u32type"
From perlxv.U:
This variable contains the C type used for Perl's U32.
"u64size"
From perlxv.U:
This variable is the size of an U64 in bytes.
"u64type"
From perlxv.U:
This variable contains the C type used for Perl's U64.
"u8size"
From perlxv.U:
This variable is the size of an U8 in bytes.
"u8type"
From perlxv.U:
This variable contains the C type used for Perl's U8.
"uidformat"
From uidf.U:
This variable contains the format string used for printing a Uid_t.
"uidsign"
From uidsign.U:
This variable contains the signedness of a uidtype. 1 for
unsigned, -1 for signed.
"uidsize"
From uidsize.U:
This variable contains the size of a uidtype in bytes.
"uidtype"
From uidtype.U:
This variable defines Uid_t to be something like uid_t, int,
ushort, or whatever type is used to declare user ids in the kernel.
"uname"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the uname program. After Configure runs, the
value is reset to a plain "uname" and is not useful.
"uniq"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the uniq program. After Configure runs, the
value is reset to a plain "uniq" and is not useful.
"uquadtype"
From quadtype.U:
This variable defines Uquad_t to be something like unsigned long,
unsigned int, unsigned long long, uint64_t, or whatever type is
used for 64-bit integers.
"use5005threads"
From usethreads.U:
This variable conditionally defines the USE_5005THREADS symbol, and
indicates that Perl should be built to use the 5.005-based
threading implementation. Only valid up to 5.8.x.
"use64bitall"
From use64bits.U:
This variable conditionally defines the USE_64_BIT_ALL symbol, and
indicates that 64-bit integer types should be used when available.
The maximal possible 64-bitness is employed: LP64 or ILP64, meaning
that you will be able to use more than 2 gigabytes of memory. This
mode is even more binary incompatible than USE_64_BIT_INT. You may
not be able to run the resulting executable in a 32-bit "CPU" at
all or you may need at least to reboot your "OS" to 64-bit mode.
"use64bitint"
From use64bits.U:
This variable conditionally defines the USE_64_BIT_INT symbol, and
indicates that 64-bit integer types should be used when available.
The minimal possible 64-bitness is employed, just enough to get
64-bit integers into Perl. This may mean using for example "long
longs", while your memory may still be limited to 2 gigabytes.
"usecrosscompile"
From Cross.U:
This variable conditionally defines the "USE_CROSS_COMPILE" symbol,
and indicates that Perl has been cross-compiled.
"usedevel"
From Devel.U:
This variable indicates that Perl was configured with development
features enabled. This should not be done for production builds.
"usedl"
From dlsrc.U:
This variable indicates if the system supports dynamic loading of
some sort. See also dlsrc and dlobj.
"usedtrace"
From usedtrace.U:
This variable indicates whether we are compiling with dtrace
support. See also dtrace.
"usefaststdio"
From usefaststdio.U:
This variable conditionally defines the "USE_FAST_STDIO" symbol,
and indicates that Perl should be built to use "fast stdio".
Defaults to define in Perls 5.8 and earlier, to undef later.
"useithreads"
From usethreads.U:
This variable conditionally defines the "USE_ITHREADS" symbol, and
indicates that Perl should be built to use the interpreter-based
threading implementation.
"usekernprocpathname"
From usekernprocpathname.U:
This variable, indicates that we can use sysctl with
"KERN_PROC_PATHNAME" to get a full path for the executable, and
hence convert $^X to an absolute path.
"uselargefiles"
From uselfs.U:
This variable conditionally defines the "USE_LARGE_FILES" symbol,
and indicates that large file interfaces should be used when
available.
"uselongdouble"
From uselongdbl.U:
This variable conditionally defines the "USE_LONG_DOUBLE" symbol,
and indicates that long doubles should be used when available.
"usemallocwrap"
From mallocsrc.U:
This variable contains y if we are wrapping malloc to prevent
integer overflow during size calculations.
"usemorebits"
From usemorebits.U:
This variable conditionally defines the "USE_MORE_BITS" symbol, and
indicates that explicit 64-bit interfaces and long doubles should
be used when available.
"usemultiplicity"
From usemultiplicity.U:
This variable conditionally defines the "MULTIPLICITY" symbol, and
indicates that Perl should be built to use multiplicity.
"usemymalloc"
From mallocsrc.U:
This variable contains y if the malloc that comes with this package
is desired over the system's version of malloc. People often
include special versions of malloc for efficiency, but such
versions are often less portable. See also mallocsrc and
mallocobj. If this is "y", then -lmalloc is removed from $libs.
"usenm"
From usenm.U:
This variable contains "true" or "false" depending whether the nm
extraction is wanted or not.
"usensgetexecutablepath"
From usensgetexecutablepath.U:
This symbol, if defined, indicates that we can use
_NSGetExecutablePath and realpath to get a full path for the
executable, and hence convert $^X to an absolute path.
"useopcode"
From Extensions.U:
This variable holds either "true" or "false" to indicate whether
the Opcode extension should be used. The sole use for this
currently is to allow an easy mechanism for users to skip the
Opcode extension from the Configure command line.
"useperlio"
From useperlio.U:
This variable conditionally defines the "USE_PERLIO" symbol, and
indicates that the PerlIO abstraction should be used throughout.
"useposix"
From Extensions.U:
This variable holds either "true" or "false" to indicate whether
the "POSIX" extension should be used. The sole use for this
currently is to allow an easy mechanism for hints files to indicate
that "POSIX" will not compile on a particular system.
"usereentrant"
From usethreads.U:
This variable conditionally defines the "USE_REENTRANT_API" symbol,
which indicates that the thread code may try to use the various _r
versions of library functions. This is only potentially meaningful
if usethreads is set and is very experimental, it is not even
prompted for.
"userelocatableinc"
From bin.U:
This variable is set to true to indicate that perl should relocate
@"INC" entries at runtime based on the path to the perl binary.
Any @"INC" paths starting .../ are relocated relative to the
directory containing the perl binary, and a logical cleanup of the
path is then made around the join point (removing dir/../ pairs)
"usesfio"
From d_sfio.U:
This variable is set to true when the user agrees to use sfio. It
is set to false when sfio is not available or when the user
explicitly requests not to use sfio. It is here primarily so that
command-line settings can override the auto-detection of d_sfio
without running into a "WHOA THERE".
"useshrplib"
From libperl.U:
This variable is set to "true" if the user wishes to build a shared
libperl, and "false" otherwise.
"usesitecustomize"
From d_sitecustomize.U:
This variable is set to true when the user requires a mechanism
that allows the sysadmin to add entries to @"INC" at runtime. This
variable being set, makes perl run $sitelib/sitecustomize.pl at
startup.
"usesocks"
From usesocks.U:
This variable conditionally defines the "USE_SOCKS" symbol, and
indicates that Perl should be built to use "SOCKS".
"usethreads"
From usethreads.U:
This variable conditionally defines the "USE_THREADS" symbol, and
indicates that Perl should be built to use threads.
"usevendorprefix"
From vendorprefix.U:
This variable tells whether the vendorprefix and consequently other
vendor* paths are in use.
"usevfork"
From d_vfork.U:
This variable is set to true when the user accepts to use vfork.
It is set to false when no vfork is available or when the user
explicitly requests not to use vfork.
"usrinc"
From usrinc.U:
This variable holds the path of the include files, which is usually
/usr/include. It is mainly used by other Configure units.
"uuname"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"uvoformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"UV" as an unsigned octal integer.
"uvsize"
From perlxv.U:
This variable is the size of a "UV" in bytes.
"uvtype"
From perlxv.U:
This variable contains the C type used for Perl's "UV".
"uvuformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"UV" as an unsigned decimal integer.
"uvxformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"UV" as an unsigned hexadecimal integer in lowercase abcdef.
"uvXUformat"
From perlxvf.U:
This variable contains the format string used for printing a Perl
"UV" as an unsigned hexadecimal integer in uppercase "ABCDEF".
v
"vaproto"
From vaproto.U:
This variable conditionally defines "CAN_VAPROTO" on systems
supporting prototype declaration of functions with a variable
number of arguments. See also prototype.
"vendorarch"
From vendorarch.U:
This variable contains the value of the "PERL_VENDORARCH" symbol.
It may have a ~ on the front. The standard distribution will put
nothing in this directory. Vendors who distribute perl may wish to
place their own architecture-dependent modules and extensions in
this directory with MakeMaker Makefile.PL "INSTALLDIRS"=vendor or
equivalent. See "INSTALL" for details.
"vendorarchexp"
From vendorarch.U:
This variable is the ~name expanded version of vendorarch, so that
you may use it directly in Makefiles or shell scripts.
"vendorbin"
From vendorbin.U:
This variable contains the eventual value of the "VENDORBIN"
symbol. It may have a ~ on the front. The standard distribution
will put nothing in this directory. Vendors who distribute perl
may wish to place additional binaries in this directory with
MakeMaker Makefile.PL "INSTALLDIRS"=vendor or equivalent. See
"INSTALL" for details.
"vendorbinexp"
From vendorbin.U:
This variable is the ~name expanded version of vendorbin, so that
you may use it directly in Makefiles or shell scripts.
"vendorhtml1dir"
From vendorhtml1dir.U:
This variable contains the name of the directory for html pages.
It may have a ~ on the front. The standard distribution will put
nothing in this directory. Vendors who distribute perl may wish to
place their own html pages in this directory with MakeMaker
Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for
details.
"vendorhtml1direxp"
From vendorhtml1dir.U:
This variable is the ~name expanded version of vendorhtml1dir, so
that you may use it directly in Makefiles or shell scripts.
"vendorhtml3dir"
From vendorhtml3dir.U:
This variable contains the name of the directory for html library
pages. It may have a ~ on the front. The standard distribution
will put nothing in this directory. Vendors who distribute perl
may wish to place their own html pages for modules and extensions
in this directory with MakeMaker Makefile.PL "INSTALLDIRS"=vendor
or equivalent. See "INSTALL" for details.
"vendorhtml3direxp"
From vendorhtml3dir.U:
This variable is the ~name expanded version of vendorhtml3dir, so
that you may use it directly in Makefiles or shell scripts.
"vendorlib"
From vendorlib.U:
This variable contains the eventual value of the "VENDORLIB"
symbol, which is the name of the private library for this package.
The standard distribution will put nothing in this directory.
Vendors who distribute perl may wish to place their own modules in
this directory with MakeMaker Makefile.PL "INSTALLDIRS"=vendor or
equivalent. See "INSTALL" for details.
"vendorlib_stem"
From vendorlib.U:
This variable is $vendorlibexp with any trailing version-specific
component removed. The elements in inc_version_list
(inc_version_list.U) can be tacked onto this variable to generate a
list of directories to search.
"vendorlibexp"
From vendorlib.U:
This variable is the ~name expanded version of vendorlib, so that
you may use it directly in Makefiles or shell scripts.
"vendorman1dir"
From vendorman1dir.U:
This variable contains the name of the directory for man1 pages.
It may have a ~ on the front. The standard distribution will put
nothing in this directory. Vendors who distribute perl may wish to
place their own man1 pages in this directory with MakeMaker
Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for
details.
"vendorman1direxp"
From vendorman1dir.U:
This variable is the ~name expanded version of vendorman1dir, so
that you may use it directly in Makefiles or shell scripts.
"vendorman3dir"
From vendorman3dir.U:
This variable contains the name of the directory for man3 pages.
It may have a ~ on the front. The standard distribution will put
nothing in this directory. Vendors who distribute perl may wish to
place their own man3 pages in this directory with MakeMaker
Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for
details.
"vendorman3direxp"
From vendorman3dir.U:
This variable is the ~name expanded version of vendorman3dir, so
that you may use it directly in Makefiles or shell scripts.
"vendorprefix"
From vendorprefix.U:
This variable holds the full absolute path of the directory below
which the vendor will install add-on packages. See "INSTALL" for
usage and examples.
"vendorprefixexp"
From vendorprefix.U:
This variable holds the full absolute path of the directory below
which the vendor will install add-on packages. Derived from
vendorprefix.
"vendorscript"
From vendorscript.U:
This variable contains the eventual value of the "VENDORSCRIPT"
symbol. It may have a ~ on the front. The standard distribution
will put nothing in this directory. Vendors who distribute perl
may wish to place additional executable scripts in this directory
with MakeMaker Makefile.PL "INSTALLDIRS"=vendor or equivalent. See
"INSTALL" for details.
"vendorscriptexp"
From vendorscript.U:
This variable is the ~name expanded version of vendorscript, so
that you may use it directly in Makefiles or shell scripts.
"version"
From patchlevel.U:
The full version number of this package, such as 5.6.1 (or 5_6_1).
This combines revision, patchlevel, and subversion to get the full
version number, including any possible subversions. This is
suitable for use as a directory name, and hence is filesystem
dependent.
"version_patchlevel_string"
From patchlevel.U:
This is a string combining version, subversion and perl_patchlevel
(if perl_patchlevel is non-zero). It is typically something like
'version 7 subversion 1' or 'version 7 subversion 1 patchlevel
11224' It is computed here to avoid duplication of code in
myconfig.SH and lib/Config.pm.
"versiononly"
From versiononly.U:
If set, this symbol indicates that only the version-specific
components of a perl installation should be installed. This may be
useful for making a test installation of a new version without
disturbing the existing installation. Setting versiononly is
equivalent to setting installperl's -v option. In particular, the
non-versioned scripts and programs such as a2p, c2ph, h2xs, pod2*,
and perldoc are not installed (see "INSTALL" for a more complete
list). Nor are the man pages installed. Usually, this is undef.
"vi"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"voidflags"
From voidflags.U:
This variable contains the eventual value of the "VOIDFLAGS"
symbol, which indicates how much support of the void type is given
by this compiler. See "VOIDFLAGS" for more info.
x
"xlibpth"
From libpth.U:
This variable holds extra path (space-separated) used to find
libraries on this platform, for example "CPU"-specific libraries
(on multi-"CPU" platforms) may be listed here.
y
"yacc"
From yacc.U:
This variable holds the name of the compiler compiler we want to
use in the Makefile. It can be yacc, byacc, or bison -y.
"yaccflags"
From yacc.U:
This variable contains any additional yacc flags desired by the
user. It is up to the Makefile to use this.
z
"zcat"
From Loc.U:
This variable is defined but not used by Configure. The value is
the empty string and is not useful.
"zip"
From Loc.U:
This variable is used internally by Configure to determine the full
pathname (if any) of the zip program. After Configure runs, the
value is reset to a plain "zip" and is not useful.
GIT DATA
Information on the git commit from which the current perl binary was
compiled can be found in the variable $Config::Git_Data. The variable
is a structured string that looks something like this:
git_commit_id='ea0c2dbd5f5ac6845ecc7ec6696415bf8e27bd52'
git_describe='GitLive-blead-1076-gea0c2db'
git_branch='smartmatch'
git_uncommitted_changes=''
git_commit_id_title='Commit id:'
git_commit_date='2009-05-09 17:47:31 +0200'
Its format is not guaranteed not to change over time.
NOTE
This module contains a good example of how to use tie to implement a
cache and an example of how to make a tied variable readonly to those
outside of it.
perl v5.16.3 2021-02-02 Config(3pm)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache/2.4.6 (CentOS)
Under GNU General Public License
2024-04-19 04:46 @127.0.0.1 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)