On Apache/2.2.3 (CentOS)
Under GNU General Public License
2012-05-19 10:55 @172.29.30.75 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
Math::Complex(3pm) Perl Programmers Reference Guide Math::Complex(3pm)
NAME
Math::Complex - complex numbers and associated mathematical functions
SYNOPSIS
use Math::Complex;
$z = Math::Complex->make(5, 6);
$t = 4 - 3*i + $z;
$j = cplxe(1, 2*pi/3);
DESCRIPTION
This package lets you create and manipulate complex numbers. By default, Perl lim-
its itself to real numbers, but an extra "use" statement brings full complex sup-
port, along with a full set of mathematical functions typically associated with
and/or extended to complex numbers.
If you wonder what complex numbers are, they were invented to be able to solve the
following equation:
x*x = -1
and by definition, the solution is noted i (engineers use j instead since i usually
denotes an intensity, but the name does not matter). The number i is a pure imagi-
nary number.
The arithmetics with pure imaginary numbers works just like you would expect it
with real numbers... you just have to remember that
i*i = -1
so you have:
5i + 7i = i * (5 + 7) = 12i
4i - 3i = i * (4 - 3) = i
4i * 2i = -8
6i / 2i = 3
1 / i = -i
Complex numbers are numbers that have both a real part and an imaginary part, and
are usually noted:
a + bi
where "a" is the real part and "b" is the imaginary part. The arithmetic with com-
plex numbers is straightforward. You have to keep track of the real and the imagi-
nary parts, but otherwise the rules used for real numbers just apply:
(4 + 3i) + (5 - 2i) = (4 + 5) + i(3 - 2) = 9 + i
(2 + i) * (4 - i) = 2*4 + 4i -2i -i*i = 8 + 2i + 1 = 9 + 2i
A graphical representation of complex numbers is possible in a plane (also called
the complex plane, but it's really a 2D plane). The number
z = a + bi
is the point whose coordinates are (a, b). Actually, it would be the vector origi-
nating from (0, 0) to (a, b). It follows that the addition of two complex numbers
is a vectorial addition.
Since there is a bijection between a point in the 2D plane and a complex number
(i.e. the mapping is unique and reciprocal), a complex number can also be uniquely
identified with polar coordinates:
[rho, theta]
where "rho" is the distance to the origin, and "theta" the angle between the vector
and the x axis. There is a notation for this using the exponential form, which is:
rho * exp(i * theta)
where i is the famous imaginary number introduced above. Conversion between this
form and the cartesian form "a + bi" is immediate:
a = rho * cos(theta)
b = rho * sin(theta)
which is also expressed by this formula:
z = rho * exp(i * theta) = rho * (cos theta + i * sin theta)
In other words, it's the projection of the vector onto the x and y axes. Mathemati-
cians call rho the norm or modulus and theta the argument of the complex number.
The norm of "z" will be noted abs(z).
The polar notation (also known as the trigonometric representation) is much more
handy for performing multiplications and divisions of complex numbers, whilst the
cartesian notation is better suited for additions and subtractions. Real numbers
are on the x axis, and therefore theta is zero or pi.
All the common operations that can be performed on a real number have been defined
to work on complex numbers as well, and are merely extensions of the operations
defined on real numbers. This means they keep their natural meaning when there is
no imaginary part, provided the number is within their definition set.
For instance, the "sqrt" routine which computes the square root of its argument is
only defined for non-negative real numbers and yields a non-negative real number
(it is an application from R+ to R+). If we allow it to return a complex number,
then it can be extended to negative real numbers to become an application from R to
C (the set of complex numbers):
sqrt(x) = x >= 0 ? sqrt(x) : sqrt(-x)*i
It can also be extended to be an application from C to C, whilst its restriction to
R behaves as defined above by using the following definition:
sqrt(z = [r,t]) = sqrt(r) * exp(i * t/2)
Indeed, a negative real number can be noted "[x,pi]" (the modulus x is always
non-negative, so "[x,pi]" is really "-x", a negative number) and the above defini-
tion states that
sqrt([x,pi]) = sqrt(x) * exp(i*pi/2) = [sqrt(x),pi/2] = sqrt(x)*i
which is exactly what we had defined for negative real numbers above. The "sqrt"
returns only one of the solutions: if you want the both, use the "root" function.
All the common mathematical functions defined on real numbers that are extended to
complex numbers share that same property of working as usual when the imaginary
part is zero (otherwise, it would not be called an extension, would it?).
A new operation possible on a complex number that is the identity for real numbers
is called the conjugate, and is noted with a horizontal bar above the number, or
"~z" here.
z = a + bi
~z = a - bi
Simple... Now look:
z * ~z = (a + bi) * (a - bi) = a*a + b*b
We saw that the norm of "z" was noted abs(z) and was defined as the distance to the
origin, also known as:
rho = abs(z) = sqrt(a*a + b*b)
so
z * ~z = abs(z) ** 2
If z is a pure real number (i.e. "b == 0"), then the above yields:
a * a = abs(a) ** 2
which is true ("abs" has the regular meaning for real number, i.e. stands for the
absolute value). This example explains why the norm of "z" is noted abs(z): it
extends the "abs" function to complex numbers, yet is the regular "abs" we know
when the complex number actually has no imaginary part... This justifies a posteri-
ori our use of the "abs" notation for the norm.
OPERATIONS
Given the following notations:
z1 = a + bi = r1 * exp(i * t1)
z2 = c + di = r2 * exp(i * t2)
z = <any complex or real number>
the following (overloaded) operations are supported on complex numbers:
z1 + z2 = (a + c) + i(b + d)
z1 - z2 = (a - c) + i(b - d)
z1 * z2 = (r1 * r2) * exp(i * (t1 + t2))
z1 / z2 = (r1 / r2) * exp(i * (t1 - t2))
z1 ** z2 = exp(z2 * log z1)
~z = a - bi
abs(z) = r1 = sqrt(a*a + b*b)
sqrt(z) = sqrt(r1) * exp(i * t/2)
exp(z) = exp(a) * exp(i * b)
log(z) = log(r1) + i*t
sin(z) = 1/2i (exp(i * z1) - exp(-i * z))
cos(z) = 1/2 (exp(i * z1) + exp(-i * z))
atan2(y, x) = atan(y / x) # Minding the right quadrant, note the order.
The definition used for complex arguments of atan2() is
-i log((x + iy)/sqrt(x*x+y*y))
The following extra operations are supported on both real and complex numbers:
Re(z) = a
Im(z) = b
arg(z) = t
abs(z) = r
cbrt(z) = z ** (1/3)
log10(z) = log(z) / log(10)
logn(z, n) = log(z) / log(n)
tan(z) = sin(z) / cos(z)
csc(z) = 1 / sin(z)
sec(z) = 1 / cos(z)
cot(z) = 1 / tan(z)
asin(z) = -i * log(i*z + sqrt(1-z*z))
acos(z) = -i * log(z + i*sqrt(1-z*z))
atan(z) = i/2 * log((i+z) / (i-z))
acsc(z) = asin(1 / z)
asec(z) = acos(1 / z)
acot(z) = atan(1 / z) = -i/2 * log((i+z) / (z-i))
sinh(z) = 1/2 (exp(z) - exp(-z))
cosh(z) = 1/2 (exp(z) + exp(-z))
tanh(z) = sinh(z) / cosh(z) = (exp(z) - exp(-z)) / (exp(z) + exp(-z))
csch(z) = 1 / sinh(z)
sech(z) = 1 / cosh(z)
coth(z) = 1 / tanh(z)
asinh(z) = log(z + sqrt(z*z+1))
acosh(z) = log(z + sqrt(z*z-1))
atanh(z) = 1/2 * log((1+z) / (1-z))
acsch(z) = asinh(1 / z)
asech(z) = acosh(1 / z)
acoth(z) = atanh(1 / z) = 1/2 * log((1+z) / (z-1))
arg, abs, log, csc, cot, acsc, acot, csch, coth, acosech, acotanh, have aliases
rho, theta, ln, cosec, cotan, acosec, acotan, cosech, cotanh, acosech, acotanh,
respectively. "Re", "Im", "arg", "abs", "rho", and "theta" can be used also as
mutators. The "cbrt" returns only one of the solutions: if you want all three, use
the "root" function.
The root function is available to compute all the n roots of some complex, where n
is a strictly positive integer. There are exactly n such roots, returned as a
list. Getting the number mathematicians call "j" such that:
1 + j + j*j = 0;
is a simple matter of writing:
$j = ((root(1, 3))[1];
The kth root for "z = [r,t]" is given by:
(root(z, n))[k] = r**(1/n) * exp(i * (t + 2*k*pi)/n)
You can return the kth root directly by "root(z, n, k)", indexing starting from
zero and ending at n - 1.
The spaceship comparison operator, <=>, is also defined. In order to ensure its
restriction to real numbers is conform to what you would expect, the comparison is
run on the real part of the complex number first, and imaginary parts are compared
only when the real parts match.
CREATION
To create a complex number, use either:
$z = Math::Complex->make(3, 4);
$z = cplx(3, 4);
if you know the cartesian form of the number, or
$z = 3 + 4*i;
if you like. To create a number using the polar form, use either:
$z = Math::Complex->emake(5, pi/3);
$x = cplxe(5, pi/3);
instead. The first argument is the modulus, the second is the angle (in radians,
the full circle is 2*pi). (Mnemonic: "e" is used as a notation for complex numbers
in the polar form).
It is possible to write:
$x = cplxe(-3, pi/4);
but that will be silently converted into "[3,-3pi/4]", since the modulus must be
non-negative (it represents the distance to the origin in the complex plane).
It is also possible to have a complex number as either argument of the "make",
"emake", "cplx", and "cplxe": the appropriate component of the argument will be
used.
$z1 = cplx(-2, 1);
$z2 = cplx($z1, 4);
The "new", "make", "emake", "cplx", and "cplxe" will also understand a single
(string) argument of the forms
2-3i
-3i
[2,3]
[2,-3pi/4]
[2]
in which case the appropriate cartesian and exponential components will be parsed
from the string and used to create new complex numbers. The imaginary component
and the theta, respectively, will default to zero.
The "new", "make", "emake", "cplx", and "cplxe" will also understand the case of no
arguments: this means plain zero or (0, 0).
DISPLAYING
When printed, a complex number is usually shown under its cartesian style a+bi, but
there are legitimate cases where the polar style [r,t] is more appropriate. The
process of converting the complex number into a string that can be displayed is
known as stringification.
By calling the class method "Math::Complex::display_format" and supplying either
"polar" or "cartesian" as an argument, you override the default display style,
which is "cartesian". Not supplying any argument returns the current settings.
This default can be overridden on a per-number basis by calling the "display_for-
mat" method instead. As before, not supplying any argument returns the current dis-
play style for this number. Otherwise whatever you specify will be the new display
style for this particular number.
For instance:
use Math::Complex;
Math::Complex::display_format('polar');
$j = (root(1, 3))[1];
print "j = $j\n"; # Prints "j = [1,2pi/3]"
$j->display_format('cartesian');
print "j = $j\n"; # Prints "j = -0.5+0.866025403784439i"
The polar style attempts to emphasize arguments like k*pi/n (where n is a positive
integer and k an integer within [-9, +9]), this is called polar pretty-printing.
For the reverse of stringifying, see the "make" and "emake".
CHANGED IN PERL 5.6
The "display_format" class method and the corresponding "display_format" object
method can now be called using a parameter hash instead of just a one parameter.
The old display format style, which can have values "cartesian" or "polar", can be
changed using the "style" parameter.
$j->display_format(style => "polar");
The one parameter calling convention also still works.
$j->display_format("polar");
There are two new display parameters.
The first one is "format", which is a sprintf()-style format string to be used for
both numeric parts of the complex number(s). The is somewhat system-dependent but
most often it corresponds to "%.15g". You can revert to the default by setting the
"format" to "undef".
# the $j from the above example
$j->display_format('format' => '%.5f');
print "j = $j\n"; # Prints "j = -0.50000+0.86603i"
$j->display_format('format' => undef);
print "j = $j\n"; # Prints "j = -0.5+0.86603i"
Notice that this affects also the return values of the "display_format" methods: in
list context the whole parameter hash will be returned, as opposed to only the
style parameter value. This is a potential incompatibility with earlier versions
if you have been calling the "display_format" method in list context.
The second new display parameter is "polar_pretty_print", which can be set to true
or false, the default being true. See the previous section for what this means.
USAGE
Thanks to overloading, the handling of arithmetics with complex numbers is simple
and almost transparent.
Here are some examples:
use Math::Complex;
$j = cplxe(1, 2*pi/3); # $j ** 3 == 1
print "j = $j, j**3 = ", $j ** 3, "\n";
print "1 + j + j**2 = ", 1 + $j + $j**2, "\n";
$z = -16 + 0*i; # Force it to be a complex
print "sqrt($z) = ", sqrt($z), "\n";
$k = exp(i * 2*pi/3);
print "$j - $k = ", $j - $k, "\n";
$z->Re(3); # Re, Im, arg, abs,
$j->arg(2); # (the last two aka rho, theta)
# can be used also as mutators.
ERRORS DUE TO DIVISION BY ZERO OR LOGARITHM OF ZERO
The division (/) and the following functions
log ln log10 logn
tan sec csc cot
atan asec acsc acot
tanh sech csch coth
atanh asech acsch acoth
cannot be computed for all arguments because that would mean dividing by zero or
taking logarithm of zero. These situations cause fatal runtime errors looking like
this
cot(0): Division by zero.
(Because in the definition of cot(0), the divisor sin(0) is 0)
Died at ...
or
atanh(-1): Logarithm of zero.
Died at...
For the "csc", "cot", "asec", "acsc", "acot", "csch", "coth", "asech", "acsch", the
argument cannot be 0 (zero). For the logarithmic functions and the "atanh",
"acoth", the argument cannot be 1 (one). For the "atanh", "acoth", the argument
cannot be "-1" (minus one). For the "atan", "acot", the argument cannot be "i"
(the imaginary unit). For the "atan", "acoth", the argument cannot be "-i" (the
negative imaginary unit). For the "tan", "sec", "tanh", the argument cannot be
pi/2 + k * pi, where k is any integer. atan2(0, 0) is undefined, and if the com-
plex arguments are used for atan2(), a division by zero will happen if z1**2+z2**2
== 0.
Note that because we are operating on approximations of real numbers, these errors
can happen when merely 'too close' to the singularities listed above.
ERRORS DUE TO INDIGESTIBLE ARGUMENTS
The "make" and "emake" accept both real and complex arguments. When they cannot
recognize the arguments they will die with error messages like the following
Math::Complex::make: Cannot take real part of ...
Math::Complex::make: Cannot take real part of ...
Math::Complex::emake: Cannot take rho of ...
Math::Complex::emake: Cannot take theta of ...
BUGS
Saying "use Math::Complex;" exports many mathematical routines in the caller envi-
ronment and even overrides some ("sqrt", "log", "atan2"). This is construed as a
feature by the Authors, actually... ;-)
All routines expect to be given real or complex numbers. Don't attempt to use
BigFloat, since Perl has currently no rule to disambiguate a '+' operation (for
instance) between two overloaded entities.
In Cray UNICOS there is some strange numerical instability that results in root(),
cos(), sin(), cosh(), sinh(), losing accuracy fast. Beware. The bug may be in
UNICOS math libs, in UNICOS C compiler, in Math::Complex. Whatever it is, it does
not manifest itself anywhere else where Perl runs.
AUTHORS
Daniel S. Lewart <d-lewart AT uiuc.edu>
Original authors Raphael Manfredi <Raphael_Manfredi AT pobox.com> and Jarkko
Hietaniemi <jhi AT iki.fi>
perl v5.8.8 2001-09-21 Math::Complex(3pm)
Generated by $Id: phpMan.php,v 4.54 2007/08/21 09:05:22 chedong Exp $ Author: Che Dong
On Apache/2.2.3 (CentOS)
Under GNU General Public License
2012-05-19 10:55 @172.29.30.75 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)