On Apache/1.3.33 (Unix) PHP/4.3.10
Under GNU General Public License
2008-08-30 07:41 @38.103.63.61 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
NETDEVICE(7) Linux Programmer’s Manual NETDEVICE(7)
NAME
netdevice - Low level access to Linux network devices
SYNOPSIS
#include <sys/ioctl.h>
#include <net/if.h>
DESCRIPTION
This man page describes the sockets interface which is used to configure network devices.
Linux supports some standard ioctls to configure network devices. They can be used on any
socket’s file descriptor regardless of the family or type. They pass an ifreq structure:
struct ifreq {
char ifr_name[IFNAMSIZ];/* Interface name */
union {
struct sockaddrifr_addr;
struct sockaddrifr_dstaddr;
struct sockaddrifr_broadaddr;
struct sockaddrifr_netmask;
struct sockaddrifr_hwaddr;
short ifr_flags;
int ifr_ifindex;
int ifr_metric;
int ifr_mtu;
struct ifmapifr_map;
char ifr_slave[IFNAMSIZ];
char ifr_newname[IFNAMSIZ];
char * ifr_data;
};
};
struct ifconf {
int ifc_len; /* size of buffer */
union {
char * ifc_buf; /* buffer address */
struct ifreq *ifc_req; /* array of structures */
};
};
Normally, the user specifies which device to affect by setting ifr_name to the name of the
interface. All other members of the structure may share memory.
IOCTLS
If an ioctl is marked as privileged then using it requires an effective user id of 0 or
the CAP_NET_ADMIN capability. If this is not the case EPERM will be returned.
SIOCGIFNAME
Given the ifr_ifindex, return the name of the interface in ifr_name. This is the
only ioctl which returns its result in ifr_name.
SIOCGIFINDEX
Retrieve the interface index of the interface into ifr_ifindex.
SIOCGIFFLAGS, SIOCSIFFLAGS
Get or set the active flag word of the device. ifr_flags contains a bitmask of the
following values:
Device flags
IFF_UP Interface is running.
IFF_BROADCAST Valid broadcast address set.
IFF_DEBUG Internal debugging flag.
IFF_LOOPBACK Interface is a loopback interface.
IFF_POINTOPOINT Interface is a point-to-point link.
IFF_RUNNING Resources allocated.
IFF_NOARP No arp protocol, L2 destination address not set.
IFF_PROMISC Interface is in promiscuous mode.
IFF_NOTRAILERS Avoid use of trailers.
IFF_ALLMULTI Receive all multicast packets.
IFF_MASTER Master of a load balancing bundle.
IFF_SLAVE Slave of a load balancing bundle.
IFF_MULTICAST Supports multicast
IFF_PORTSEL Is able to select media type via ifmap.
IFF_AUTOMEDIA Auto media selection active.
IFF_DYNAMIC The addresses are lost when the interface goes
down.
Setting the active flag word is a privileged operation, but any process may read
it.
SIOCGIFMETRIC, SIOCSIFMETRIC
Get or set the metric of the device using ifr_metric. This is currently not imple-
mented; it sets ifr_metric to 0 if you attempt to read it and returns EOPNOTSUPP if
you attempt to set it.
SIOCGIFMTU, SIOCSIFMTU
Get or set the MTU (Maximum Transfer Unit) of a device using ifr_mtu. Setting the
MTU is a privileged operation. Setting the MTU to too small values may cause kernel
crashes.
SIOCGIFHWADDR, SIOCSIFHWADDR
Get or set the hardware address of a device using ifr_hwaddr. The hardware address
is specified in a struct sockaddr. sa_family contains the ARPHRD_* device type,
sa_data the L2 hardware address starting from byte 0. Setting the hardware address
is a privileged operation.
SIOCSIFHWBROADCAST
Set the hardware broadcast address of a device from ifr_hwaddr. This is a privi-
leged operation.
SIOCGIFMAP, SIOCSIFMAP
Get or set the interface’s hardware parameters using ifr_map. Setting the parame-
ters is a privileged operation.
struct ifmap
{
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
};
The interpretation of the ifmap structure depends on the device driver and the
architecture.
SIOCADDMULTI, SIOCDELMULTI
Add an address to or delete an address from the device’s link layer multicast fil-
ters using ifr_hwaddr. These are privileged operations. See also packet(7) for an
alternative.
SIOCGIFTXQLEN, SIOCSIFTXQLEN
Get or set the transmit queue length of a device using ifr_qlen. Setting the
transmit queue length is a privileged operation.
SIOCSIFNAME
Changes the name of the interface specified in ifr_name to ifr_newname. This is a
privileged operation. It is only allowed when the interface is not up.
SIOCGIFCONF
Return a list of interface (transport layer) addresses. This currently means only
addresses of the AF_INET (IPv4) family for compatibility. The user passes a ifconf
structure as argument to the ioctl. It contains a pointer to an array of ifreq
structures in ifc_req and its length in bytes in ifc_len. The kernel fills the
ifreqs with all current L3 interface addresses that are running: ifr_name contains
the interface name (eth0:1 etc.), ifr_addr the address. The kernel returns with
the actual length in ifc_len. If ifc_len is equal to the original length the
buffer probably has overflowed and you should retry with a bigger buffer to get all
addresses. When no error occurs the ioctl returns 0; otherwise -1. Overflow is no
error.
Most protocols support their own ioctls to configure protocol specific interface options.
See the protocol man pages for a description. For configuring IP addresses see ip(7).
In addition some devices support private ioctls. These are not described here.
NOTES
Strictly seen, SIOCGIFCONF is IP specific and belongs in ip(7).
The names of interfaces with no addresses or that don’t have the IFF_RUNNING flag set can
be found via /proc/net/dev.
Local IPv6 IP addresses can be found via /proc/net or via rtnetlink(7).
BUGS
glibc 2.1 is missing the ifr_newname macro in net/if.h. Add the following to your program
as workaround:
#ifndef ifr_newname
#define ifr_newname ifr_ifru.ifru_slave
#endif
SEE ALSO
ip(7), proc(7), rtnetlink(7)
Linux Man Page 1999-05-02 NETDEVICE(7)
Generated by $Id: phpMan.php,v 4.54 2007/08/21 09:05:22 chedong Exp $ Author: Che Dong
On Apache/1.3.33 (Unix) PHP/4.3.10
Under GNU General Public License
2008-08-30 07:41 @38.103.63.61 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)