On Apache/1.3.33 (Unix) PHP/4.3.10
Under GNU General Public License
2008-09-05 13:12 @38.103.63.61 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
PACKET(7) Linux Programmer’s Manual PACKET(7)
NAME
packet, PF_PACKET - packet interface on device level.
SYNOPSIS
#include <sys/socket.h>
#include <features.h> /* for the glibc version number */
#if __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
#include <netpacket/packet.h>
#include <net/ethernet.h> /* the L2 protocols */
#else
#include <asm/types.h>
#include <linux/if_packet.h>
#include <linux/if_ether.h> /* The L2 protocols */
#endif
packet_socket = socket(PF_PACKET, int socket_type, int protocol);
DESCRIPTION
Packet sockets are used to receive or send raw packets at the device driver (OSI Layer 2)
level. They allow the user to implement protocol modules in user space on top of the phys-
ical layer.
The socket_type is either SOCK_RAW for raw packets including the link level header or
SOCK_DGRAM for cooked packets with the link level header removed. The link level header
information is available in a common format in a sockaddr_ll. protocol is the IEEE 802.3
protocol number in network order. See the <linux/if_ether.h> include file for a list of
allowed protocols. When protocol is set to htons(ETH_P_ALL) then all protocols are
received. All incoming packets of that protocol type will be passed to the packet socket
before they are passed to the protocols implemented in the kernel.
Only processes with effective uid 0 or the CAP_NET_RAW capability may open packet sockets.
SOCK_RAW packets are passed to and from the device driver without any changes in the
packet data. When receiving a packet, the address is still parsed and passed in a stan-
dard sockaddr_ll address structure. When transmitting a packet, the user supplied buffer
should contain the physical layer header. That packet is then queued unmodified to the
network driver of the interface defined by the destination address. Some device drivers
always add other headers. SOCK_RAW is similar to but not compatible with the obsolete
SOCK_PACKET of Linux 2.0.
SOCK_DGRAM operates on a slightly higher level. The physical header is removed before the
packet is passed to the user. Packets sent through a SOCK_DGRAM packet socket get a suit-
able physical layer header based on the information in the sockaddr_ll destination address
before they are queued.
By default all packets of the specified protocol type are passed to a packet socket. To
only get packets from a specific interface use bind(2) specifying an address in a struct
sockaddr_ll to bind the packet socket to an interface. Only the sll_protocol and the
sll_ifindex address fields are used for purposes of binding.
The connect(2) operation is not supported on packet sockets.
When the MSG_TRUNC flag is passed to recvmsg(2), recv(2), recvfrom(2) the real length of
the packet on the wire is always returned, even when it is longer than the buffer.
ADDRESS TYPES
The sockaddr_ll is a device independent physical layer address.
struct sockaddr_ll {
unsigned short sll_family; /* Always AF_PACKET */
unsigned short sll_protocol; /* Physical layer protocol */
int sll_ifindex; /* Interface number */
unsigned short sll_hatype; /* Header type */
unsigned char sll_pkttype; /* Packet type */
unsigned char sll_halen; /* Length of address */
unsigned char sll_addr[8]; /* Physical layer address */
};
sll_protocol is the standard ethernet protocol type in network order as defined in the
linux/if_ether.h include file. It defaults to the socket’s protocol. sll_ifindex is the
interface index of the interface (see netdevice(7)); 0 matches any interface (only legal
for binding). sll_hatype is a ARP type as defined in the linux/if_arp.h include file.
sll_pkttype contains the packet type. Valid types are PACKET_HOST for a packet addressed
to the local host, PACKET_BROADCAST for a physical layer broadcast packet, PACKET_MULTI-
CAST for a packet sent to a physical layer multicast address, PACKET_OTHERHOST for a
packet to some other host that has been caught by a device driver in promiscuous mode, and
PACKET_OUTGOING for a packet originated from the local host that is looped back to a
packet socket. These types make only sense for receiving. sll_addr and sll_halen contain
the physical layer (e.g. IEEE 802.3) address and its length. The exact interpretation
depends on the device.
When you send packets it is enough to specify sll_family, sll_addr, sll_halen,
sll_ifindex. The other fields should be 0. sll_hatype and sll_pkttype are set on
received packets for your information. For bind only sll_protocol and sll_ifindex are
used.
SOCKET OPTIONS
Packet sockets can be used to configure physical layer multicasting and promiscuous mode.
It works by calling setsockopt(2) on a packet socket for SOL_PACKET and one of the options
PACKET_ADD_MEMBERSHIP to add a binding or PACKET_DROP_MEMBERSHIP to drop it. They both
expect a packet_mreq structure as argument:
struct packet_mreq
{
int mr_ifindex; /* interface index */
unsigned short mr_type; /* action */
unsigned short mr_alen; /* address length */
unsigned char mr_address[8]; /* physical layer address */
};
mr_ifindex contains the interface index for the interface whose status should be changed.
The mr_type parameter specifies which action to perform. PACKET_MR_PROMISC enables
receiving all packets on a shared medium - often known as ‘‘promiscuous mode’’,
PACKET_MR_MULTICAST binds the socket to the physical layer multicast group specified in
mr_address and mr_alen, and PACKET_MR_ALLMULTI sets the socket up to receive all multicast
packets arriving at the interface.
In addition the traditional ioctls SIOCSIFFLAGS, SIOCADDMULTI, SIOCDELMULTI can be used
for the same purpose.
IOCTLS
SIOCGSTAMP can be used to receive the time stamp of the last received packet. Argument is
a struct timeval.
In addition all standard ioctls defined in netdevice(7) and socket(7) are valid on packet
sockets.
ERROR HANDLING
Packet sockets do no error handling other than errors occurred while passing the packet to
the device driver. They don’t have the concept of a pending error.
COMPATIBILITY
In Linux 2.0, the only way to get a packet socket was by calling socket(PF_INET,
SOCK_PACKET, protocol). This is still supported but strongly deprecated. The main dif-
ference between the two methods is that SOCK_PACKET uses the old struct sockaddr_pkt to
specify an interface, which doesn’t provide physical layer independence.
struct sockaddr_pkt
{
unsigned short spkt_family;
unsigned char spkt_device[14];
unsigned short spkt_protocol;
};
spkt_family contains the device type, spkt_protocol is the IEEE 802.3 protocol type as
defined in <sys/if_ether.h> and spkt_device is the device name as a null terminated
string, e.g. eth0.
This structure is obsolete and should not be used in new code.
NOTES
For portable programs it is suggested to use PF_PACKET via pcap(3); although this only
covers a subset of the PF_PACKET features.
The SOCK_DGRAM packet sockets make no attempt to create or parse the IEEE 802.2 LLC header
for a IEEE 802.3 frame. When ETH_P_802_3 is specified as protocol for sending the kernel
creates the 802.3 frame and fills out the length field; the user has to supply the LLC
header to get a fully conforming packet. Incoming 802.3 packets are not multiplexed on the
DSAP/SSAP protocol fields; instead they are supplied to the user as protocol ETH_P_802_2
with the LLC header prepended. It is thus not possible to bind to ETH_P_802_3; bind to
ETH_P_802_2 instead and do the protocol multiplex yourself. The default for sending is
the standard Ethernet DIX encapsulation with the protocol filled in.
Packet sockets are not subject to the input or output firewall chains.
ERRORS
ENETDOWN
Interface is not up.
ENOTCONN
No interface address passed.
ENODEV Unknown device name or interface index specified in interface address.
EMSGSIZE
Packet is bigger than interface MTU.
ENOBUFS
Not enough memory to allocate the packet.
EFAULT User passed invalid memory address.
EINVAL Invalid argument.
ENXIO Interface address contained illegal interface index.
EPERM User has insufficient privileges to carry out this operation.
EADDRNOTAVAIL
Unknown multicast group address passed.
ENOENT No packet received.
In addition other errors may be generated by the low-level driver.
VERSIONS
PF_PACKET is a new feature in Linux 2.2. Earlier Linux versions supported only
SOCK_PACKET.
BUGS
glibc 2.1 does not have a define for SOL_PACKET. The suggested workaround is to use
#ifndef SOL_PACKET
#define SOL_PACKET 263
#endif
This is fixed in later glibc versions and also does not occur on libc5 systems.
The IEEE 802.2/803.3 LLC handling could be considered as a bug.
Socket filters are not documented.
The MSG_TRUNC recvmsg extension is an ugly hack and should be replaced by a control mes-
sage. There is currently no way to get the original destination address of packets via
SOCK_DGRAM.
CREDITS
This man page was written by Andi Kleen with help from Matthew Wilcox. PF_PACKET in Linux
2.2 was implemented by Alexey Kuznetsov, based on code by Alan Cox and others.
SEE ALSO
ip(7), socket(7), socket(2), raw(7), pcap(3)
RFC 894 for the standard IP Ethernet encapsulation.
RFC 1700 for the IEEE 802.3 IP encapsulation.
The <linux/if_ether.h> include file for physical layer protocols.
Linux Man Page 1999-04-29 PACKET(7)
Generated by $Id: phpMan.php,v 4.54 2007/08/21 09:05:22 chedong Exp $ Author: Che Dong
On Apache/1.3.33 (Unix) PHP/4.3.10
Under GNU General Public License
2008-09-05 13:12 @38.103.63.61 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)