shutdown - phpMan

Command: man perldoc info search(apropos)  


SHUTDOWN(8)           Linux System Administrator's Manual          SHUTDOWN(8)



NAME
       shutdown - bring the system down

SYNOPSIS
       /sbin/shutdown [-t sec] [-arkhncfFHP] time [warning-message]

DESCRIPTION
       shutdown  brings the system down in a secure way.  All logged-in users are notified
       that the system is going down, and login(1) is blocked.  It is possible to shut the
       system  down immediately or after a specified delay.  All processes are first noti-
       fied that the system is going down by the signal SIGTERM.  This gives programs like
       vi(1)  the  time to save the file being edited, mail and news processing programs a
       chance to exit cleanly, etc.  shutdown does its job by signalling the init process,
       asking  it to change the runlevel.  Runlevel 0 is used to halt the system, runlevel
       6 is used to reboot the system, and runlevel 1 is used to  put  to  system  into  a
       state  where  administrative tasks can be performed; this is the default if neither
       the -h or -r flag is given to shutdown.  To see which actions are taken on halt  or
       reboot see the appropriate entries for these runlevels in the file /etc/inittab.

OPTIONS
       -a     Use /etc/shutdown.allow.

       -t sec Tell  init(8)  to wait sec seconds between sending processes the warning and
              the kill signal, before changing to another runlevel.

       -k     Don't really shutdown; only send the warning messages to everybody.

       -r     Reboot after shutdown.

       -h     Halt or poweroff after shutdown.

       -H     Halt action is to halt or drop into boot monitor on systems that support it.

       -P     Halt action is to turn off the power.

       -n     [DEPRECATED]  Don't  call init(8) to do the shutdown but do it ourself.  The
              use of this option is discouraged, and its results are not always what you'd
              expect.

       -f     Skip fsck on reboot.

       -F     Force fsck on reboot.

       -c     Cancel  an  already  running  shutdown. With this option it is of course not
              possible to give the time argument, but you can enter a explanatory  message
              on the command line that will be sent to all users.

       time   When to shutdown.

       warning-message
              Message to send to all users.

       The time argument can have different formats.  First, it can be an absolute time in
       the format hh:mm, in which hh is the hour (1 or 2 digits) and mm is the  minute  of
       the  hour  (in  two digits).  Second, it can be in the format +m, in which m is the
       number of minutes to wait.  The word now is an alias for +0.

       If shutdown is called with a delay, it creates the advisory file /etc/nologin which
       causes  programs  such  as  login(1) to not allow new user logins. Shutdown removes
       this file if it is stopped before it can signal init (i.e. it is cancelled or some-
       thing  goes wrong).  It also removes it before calling init to change the runlevel.

       The -f flag means 'reboot fast'.  This only  creates  an  advisory  file  /fastboot
       which  can  be  tested  by the system when it comes up again.  The boot rc file can
       test if this file is present, and decide not to run fsck(1) since  the  system  has
       been  shut  down  in  the  proper  way.  After that, the boot process should remove
       /fastboot.

       The -F flag means 'force fsck'.  This only  creates  an  advisory  file  /forcefsck
       which  can  be  tested  by the system when it comes up again.  The boot rc file can
       test if this file is present, and decide to run fsck(1) with a special 'force' flag
       so that even properly unmounted filesystems get checked.  After that, the boot pro-
       cess should remove /forcefsck.

       The -n flag causes shutdown not to call init, but to  kill  all  running  processes
       itself.   shutdown  will  then turn off quota, accounting, and swapping and unmount
       all filesystems.

ACCESS CONTROL
       shutdown can be called from init(8) when the magic keys CTRL-ALT-DEL  are  pressed,
       by  creating an appropriate entry in /etc/inittab. This means that everyone who has
       physical access to the console keyboard can shut the system down. To prevent  this,
       shutdown  can check to see if an authorized user is logged in on one of the virtual
       consoles. If shutdown is called with the -a argument (add this to the invocation of
       shutdown  in  /etc/inittab),  it  checks  to see if the file /etc/shutdown.allow is
       present.  It then compares the login names in that file with  the  list  of  people
       that  are logged in on a virtual console (from /var/run/utmp). Only if one of those
       authorized users or root is logged in, it will proceed. Otherwise it will write the
       message

       shutdown: no authorized users logged in

       to  the  (physical)  system  console. The format of /etc/shutdown.allow is one user
       name per line. Empty lines and comment lines (prefixed by a #)  are  allowed.  Cur-
       rently there is a limit of 32 users in this file.

       Note that if /etc/shutdown.allow is not present, the -a argument is ignored.

HALT OR POWEROFF
       The -H option just sets the init environment variable INIT_HALT to HALT, and the -P
       option just sets that variable to POWEROFF. The shutdown script that calls  halt(8)
       as the last thing in the shutdown sequence should check these environment variables
       and call halt(8) with the right options for these  options  to  actually  have  any
       effect.  Debian 3.1 (sarge) supports this.

FILES
       /fastboot
       /etc/inittab
       /etc/init.d/halt
       /etc/init.d/reboot
       /etc/shutdown.allow

NOTES
       A  lot  of users forget to give the time argument and are then puzzled by the error
       message shutdown produces. The time argument is mandatory; in  90  percent  of  all
       cases this argument will be the word now.

       Init can only capture CTRL-ALT-DEL and start shutdown in console mode.  If the sys-
       tem is running the X window System, the X server processes all  key  strokes.  Some
       X11 environments make it possible to capture CTRL-ALT-DEL, but what exactly is done
       with that event depends on that environment.

       Shutdown wasn't designed to be run setuid. /etc/shutdown.allow is not used to  find
       out who is executing shutdown, it ONLY checks who is currently logged in on (one of
       the) console(s).

AUTHOR
       Miquel van Smoorenburg, miquels AT cistron.nl

SEE ALSO
       fsck(8), init(8), halt(8), poweroff(8), reboot(8)



                               November 12, 2003                   SHUTDOWN(8)

Generated by $Id: phpMan.php,v 4.54 2007/08/21 09:05:22 chedong Exp $ Author: Che Dong
On Apache/2.2.3 (Red Hat)
Under GNU General Public License
2009-11-09 19:41 @127.0.0.1 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
Valid XHTML 1.0!Valid CSS!